榫连结构几何参数对接触应力的影响

推进技术 ›› 2010, Vol. 31 ›› Issue (4): 473-477.

榫连结构几何参数对接触应力的影响

魏大盛,王延荣

北京航空航天大学能源与动力工程学院;北京航空航天大学能源与动力工程学院

发布日期:2021-08-15
基金资助:
凡舟青年科研基金(20080403)

Effects of critical geometrical parameters on distribution of contact stress in a tenon jointing

Coll.of Energy and Power Engineering,Beijing Univ.of Aeronautics and Astronautics,Beijing 100191,China;Coll.of Energy and Power Engineering,Beijing Univ.of Aeronautics and Astronautics,Beijing 100191,China

Published:2021-08-15

摘要/Abstract

摘要： 以某燕尾形榫连结构作为研究对象,采用有限元法开展了接触应力分析,用以研究榫连结构几何参数对其接触应力的影响,并应用于工程中榫连结构的强度分析。计算表明榫齿/榫槽接触区边缘存在较高的应力梯度;在此基础上,建立了不同的几何模型以考查关键几何参数对接触应力的影响,例如接触面角度、长度、接触区边缘圆角半径以及接触面几何形式,重点研究了圆弧/直线几何形式下的接触应力分布,并讨论了其几何参数对接触区应力改善的作用;研究结果表明合理选择几何参数可以改善接触区应力分布,提高榫连结构寿命。

关键词: 榫连结构;接触应力;高应力梯度;关键几何参数;接触面构形;优化设计

Abstract: Finite element models of dovetail were established to calculate the stress on contact surface,and the results re-vealed that there was high stress gradient near the edges of contact zone.Several geometries were chosen to study the effect of critical geometrical parameters on stress distribution,which showed different features,such as contact angle,contact length,fillet radius,and profile of contact surface.The numerical research focused on an arc/line contact profile in 2D,and on the basis of contact stress,different stress distributions were studied due to changed geometrical parameters.Conclusions indicated that the logical geometry would improve the stress status to increase the structural life.

Key words: Tenon jointing;Contact stress;High stress gradient;Critical geometrical parameters;Contact profile;Optimization design

魏大盛,王延荣. 榫连结构几何参数对接触应力的影响[J]. 推进技术, 2010, 31(4): 473-477.