[2] Farhangi S, Yu T, Rojas L, et al.Gas-gas injector technology for full flow combustion cycle application [R].AIAA 99-2757. [3] Foust M J, Pal S, Santoro R J.Gaseous propellant rocket studies using raman spectroscopy[R].AlAA 96-2766. [4] 杜正刚, 高玉闪, 金平, 等.速度比对气-气喷嘴燃烧性能的影响[J].推进技术,9,0(5).(DU Zheng-gang, GAO Yu-shan, JIN Ping, et al.Effect of velocity ratio on combustion process gas-gas injector[J].Journal of Propulsion Technology, 9,0 (5).) [5] 俞南嘉, 张国舟, 宋雅娜, 等.同轴氢氧谐振点火器试验研究[J].推进技术,4,5(3).(YU Nan-jia, ZHANG Guo-zhou, SONG Ya-na, et al.Experimental investigation for coaxial hydrogen/oxygen resonance ignitor[J].Journal of Propulsion Technology,4,5(3).) [6] Vigor Yang, Mohammed Habiballah, James Hulka, et al.Liquid rocket thrust chambers:Aspects of modeling, Analysis, and design[M].USA:American Institute of Aeronautics and Astronautics,2004:85~90. [7] 张海平.轴流风速下压力旋流喷嘴外流场特性研究[D].徐州:中国石油大学, 2009. [8] 洪流, Schwald O M, 仲伟聪.剪切同轴式喷嘴中心管壁厚对火焰的影响[J].推进技术,8,9(3).(HONG Liu, Schwald O M, ZHONG Wei-cong.Numerical and experimental investigation on edge diffusion effect of shear coaxial injector[J].Journal of Propulsion Technology, 8,9(3).) [9] 刘巍, 李理, 杨涛.旋转冲压增程弹进气道内流场旋流数计算[J].推进技术, 9,0(2).(LIU Wei, LI Li, YANG Tao.Swirl number calculation in the inlet of spinning ramjet assisted range projectile[J].Journal of Propulsion Technology, 9,0(2).)
|