双组元发动机燃烧室瞬态工作过程仿真

推进技术 ›› 2012, Vol. 33 ›› Issue (2): 193-197.

双组元发动机燃烧室瞬态工作过程仿真

唐振宇,侯凤龙,蔡国飙

北京航空航天大学宇航学院,北京 100191;中国空间技术研究院,北京 100094;北京航空航天大学宇航学院,北京 100191

发布日期:2021-08-15
作者简介:唐振宇(1984—),男,博士生,研究领域为液体火箭发动机喷雾燃烧。E-mail:rain_tang@sa.buaa.edu.cn

A Model for Simulating the Transient Process for Combustion Chamber of Bipropellant Attitude-Control Engine

School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;Chinese Academy of Space Technology, Beijing 100094, China;School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

Published:2021-08-15

摘要/Abstract

摘要： 为真实模拟双组元姿控发动机燃烧室的瞬态工作过程,耦合考虑了自燃点火与喷雾燃烧过程,提出了适合于准一维计算的求解燃烧室气体参数的新方法,发展了可反映集液腔填充和排空过程影响的喷注质量子模型,建立了分析双组元姿控发动机燃烧室瞬态工作过程的准一维模型。利用此仿真模型分析了EADS 10N姿控发动机燃烧室的单脉冲和多脉冲工作过程,得到了真空推力、液滴位置分布和总冲等结果,并与文献中的试验结果进行了比较分析。表明仿真结果与试验结果一致性较好。 

关键词: 双组元姿控发动机;燃烧室;工作过程;仿真模型

Abstract: In order to simulate the transient operating process of the combustion chamber of bipropellant attitude-control engine, a quasi-1D simulation model for analyzing the working process of bipropellant attitude-control engine was established, in which hypergolic ignition process and spray combustion process were coupled, a new method for calculating the gas parameter within combustion chamber was proposed and, a sub-module for calculating the spray mass was developed, involving the influences of injector cavity filling and ejecting processes. The transient operating process of EADS’s 10N attitude-control engine was analyzed using this model. The results, including vacuum thrust, droplet distribution and total impule, were presented and compared with experimental data from open literature. The result shows good agreement with experimental data. This model is capable of providing basis for the design and performance analysis of bipropellant attitude-control engines.

Key words: Bipropellant attitude-control engine; Combustion chamber; Operating process; Simulation model

唐振宇,侯凤龙,蔡国飙. 双组元发动机燃烧室瞬态工作过程仿真[J]. 推进技术, 2012, 33(2): 193-197.

参考文献

[2] Webber W T, Hoffman R J.A Mechanistic Model for Analysis of Pulse-Mode Engine Operation[R]. AIAA 72-1184.
[3] Hoffman R J, Webber W T, Oeding R G.An Analytical model for the Prediction of Liquid Rocket Plume Contamination Effects on Sensitive Surfaces[R].AIAA 72-1172.
[4] Preclik D, Estublier D.An Eulerian-Lagrangian Approach to Spray Combustion Modeling for Liquid Bi-Propellant Rocket Motors[R].AIAA 1995-2779.
[5] Knab O, Preclik D, Estublier D.Flow Field Prediction within Liquid Film Cooled Combustion Chambers of Storable Bi-Propellant Rocket Engines[R].AIAA 1998-3370.
[6] 庄逢辰.液体火箭发动机喷雾燃烧的理论、模型及应用[M].长沙:国防科技大学出版社,1995:204-211.
[7] 陈新华, 聂万胜, 戴德海.飞船推进系统推力室工作过程数值仿真[J].指挥技术学院学报,1,2(5):19-22.
[8] 陈新华, 李伟榕.考虑燃烧过程的航天器液体火箭发动机动态特性分析[J].科学技术与工程,0,0(11):2665-2671.
[9] 聂万胜, 庄逢辰.自燃推进剂火箭发动机稳态燃烧过程的数值模拟[J].推进技术, 8,9(5):6-9.(NIE Wan-sheng,ZHUANG Feng-chen.Numerical Simulation of Stable Combustion Process in Earth Storable Bipropellant Rocket Engine[J].Journal of Propul sion Technology,8,9(5):6-9.)
[10] 黎勤武, 张为华, 王振国, 等.空间姿控、末修级发动机系统动态特性分析[J].推进技术, 7,8(3):20-24.(LI Qin-wu,ZHANG Wei-hua,WANG Zheng-guo,et al.Analysis on transient processes of a pulsating engine system with multiple thrust chambers[J].Journal of Propulsion Technology,7,8(3):20-24.)
[11] 李宜敏, 张中钦, 张远君.固体火箭发动机原理[M].北京:北京航空航天大学出版社,1999.
[12] Hoffman R J, Kawasaki A, Trinks H.The CONTAM 3.2 Plume Flowfield Analysis and Contamination Prediction Computer Program:Analysis Model and Experimental Verification[R].AIAA 85-0928.