孔阵排列和偏转角对多斜孔壁火焰筒冷却效果的影响研究

推进技术 ›› 2013, Vol. 34 ›› Issue (10): 1369-1375.

孔阵排列和偏转角对多斜孔壁火焰筒冷却效果的影响研究

刘常春¹,吉洪湖¹,杨芳芳²,张勃¹,郑妹¹

南京航空航天大学能源与动力学院,江苏南京 210016;南京航空航天大学能源与动力学院,江苏南京 210016;上海空间推进研究所发动机研究室,上海 201112;南京航空航天大学能源与动力学院,江苏南京 210016;南京航空航天大学能源与动力学院,江苏南京 210016

发布日期:2021-08-15
作者简介:刘常春(1986—),男,博士生,研究领域为航空发动机的传热传质。E-mail:lccnuaa@foxmail.com

Numerical Study on Cooling Effects of Hole Arrangement and Deflected Angle of Inclined Multi-hole on Annular Flame Tube

College of Energy and Power, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;College of Energy and Power, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;Aerospace Engine Research Department, Shanghai Institute of Space Propulsion, Shanghai 201112, China;College of Energy and Power, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;College of Energy and Power, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究火焰筒上孔阵排列和偏转角对多斜孔壁冷却效果的影响规律,将多斜孔壁冷却结构应用到航空发动机的燃烧室火焰筒壁上,通过数值模拟研究了不同孔阵排列和不同偏转角的共6种多斜孔结构对火焰筒壁的冷却效果,包括有效温比和对流换热系数的比较。结果表明:在燃烧室上,孔阵排列对多斜孔壁冷却效果的影响与平板模型的规律一致,叉排孔阵排列优于顺排孔阵排列,孔排周向位移找到了冷却效果较好时的孔排周向位移值；在火焰筒前端,偏转角的选取应考虑到旋流器对流场的影响,而在火焰筒后端,偏转角为0°的冷却效果较好。 

关键词: 航空发动机;燃烧室;火焰筒;多斜孔壁冷却;孔阵排列;偏转角;数值模拟 

Abstract: Numerical simulation was performed on the annular flame tube in aero-engine combustor with inclined multi-hole applied. Six different structures of inclined multi-hole were studied in order to analyze the cooling effects of hole arrangement and deflection angle on the wall of annular flame tube by comparison of cooling effectiveness and heat transfer coefficient. Results show that, in aero-engine combustor, the cooling effect of the hole arrangement is about the same as in the flat. Staggered arrangement is better than aligned arrangement.The circumferential displacement is obtained for the better cooling effects. In the front tube, the deflected angle should be selected according to the effects of the swirler.At the back of the tube, when the deflected angle is 0°, the cooling effect is among the best. 

Key words: Aero-engine; Combustor; Flame tube; Inclined multi-hole; Hole arrangement; Deflected angle; Numerical simulation

刘常春,吉洪湖,杨芳芳,张勃,郑妹. 孔阵排列和偏转角对多斜孔壁火焰筒冷却效果的影响研究[J]. 推进技术, 2013, 34(10): 1369-1375.

LIU Chang-chun¹, JI Hong-hu¹, YANG Fang-fang², ZHANG Bo¹, ZHENG Mei¹. Numerical Study on Cooling Effects of Hole Arrangement and Deflected Angle of Inclined Multi-hole on Annular Flame Tube[J]. Journal of Propulsion Technology, 2013, 34(10): 1369-1375.

参考文献

[1] Lefebvre A H.Gas Turbin Combustion[M].New York:McGraw-Hill, 1983.
[2] Gerendas M, Hoschler K, Schiling Th.Development and Modeling of Angled Effusion Cooling for the BR715Low Emission Staged Combustor Core Demonstrator[R].AD A-419282.
[3] Powel S F IV.On the Leading Edge:Combining Maturity and Advanced Technology on the F404Turbofan Engine[J].Journal of Engineering for Gas Turbines and Power, 1991,3(1):1-10.
[4] 方昌德.世界航空发动机手册[M].北京:航空工业出版社, 1996.
[5] 李彬, 胡正义, 林宇震, 等.多斜孔壁整体冷却效率实验研究[J].航空动力学报, 1999,4(2):158-160.
[6] 林宇震, 李彬, 宋波, 等.多斜孔壁冷却方式不同进气角度小孔内对流换热研究[J].推进技术, 1999,0(1):68-72.(LIN Yu-zhen, LI Bin, SONG Bo, et al.Investigation of Convective Heat Transfer Inside Small Holes with Different Inlet Angles in Inclined Multihole Wall Film Cooling[J].Journal of Propulsion Technology, 1999,0(1):68-72.)
[7] 李军, 董志锐, 林宇震, 等.多斜孔气膜冷却壁表面换热系数实验研究[J].推进技术, 2000,1(5):45-48.(LI Jun, DONG Zhi-rui, LIN Yu-zhen, et al.Experimental Investigation of Heat Transfer Coefficients on the Inclined Multihole Film Cooling Wall[J].Journal of Propulsion Technology, 2000,1(5):45-48.)
[8] 方韧, 李彬, 林宇震, 等.多斜孔壁气膜冷却绝热温比传热传质类比实验研究[J].航空动力学报, 1998,3(1):65-68.
[9] 宋波, 林宇震, 刘高恩, 等.不同排列方式多斜孔壁气膜冷却绝热温比研究[J].航空动力学报, 1999,4(1):91-94.
[10] 林宇震, 宋波, 李彬, 等.不同偏角多斜孔壁气膜冷却绝热温比研究[J].推进技术, 1998,9(5):43-46.(LIN Yu-zhen, SONG Bo, LIN Bin, et al.Investigation of Adiabatic Wall Film Effectiveness of Inclined Multihole Wall Film Cooling with Different Deflected Angle[J].Journal of Propulsion Technology, 1998,9(5):43-46.)
[11] 陈焱, 吉洪湖, 胡娅萍, 等.致密微孔壁绝热冷却效果的研究[J].工程热物理学报, 2006,7(2):25-28.
[12] 陈焱, 吉洪湖, 胡娅萍.致密微孔壁复合冷却对流换热系数的数值研究[J].工程热物理学报, 2005,6(3):489-491.
[13] 林宇震, 袁怡祥, 刘高恩,等.燃烧室主燃孔下游气膜绝热温比研究[J].推进技术, 2002,3(4):273-275.(LIN Yu-zhen, YUAN Yi-xiang, LIU Gao-en, et al.Adiabatic Film Cooling Effectiveness Downstream of Primary Jet in Combustion Chamber[J].Journal of Propulsion Technology, 2002,3(4):273-275.)
[14] 徐剑, 许全宏, 林宇震, 等.火焰筒多斜孔冷却方式壁温梯度和冷却效率试验[J].航空动力学报, 2008,0(3):425-429.
[15] 张勃, 吉洪湖, 杨芳芳, 等.多斜孔壁与机加环气膜冷却燃烧室的壁面换热特性数值研究[J].航空动力学报, 2012,7(4):832-836.
[16] Sellers J P Jr.Gaseous Film Cooling with Multiple Injection Stations[J].AIAA Journal, 1963,1(9):2145-2156.