[1] 曹玉璋, 陶智, 徐国强. 航空发动机传热学[M]. 北京: 北京航空航天大学出版社, 2005.
[2] Chew J W. A Theoretical Study of Ingress for Shrouded Rotating Disk Systems with Radial Outflow[J]. Journal of Turbomachinery, 1991, 113(1): 91-97.
[3] Bayley F J, Childs P R N. Prediction of Ingress Rates to Turbine and Compressor Wheelspaces[J]. International Journal of Heat and Fluid Flow, 1997, 18(2): 218-228.
[4] Owen J M. Prediction of Ingestion Through Rurbine Aim Seals—Part I: Rotationally Induced Ingress[J]. Journal of Turbomachinery, 2011, 133(3).
[5] Owen J M. Prediction of Ingestion Through Turbine Rim Seals—Part II: Externally Induced and Combined Ingress[J]. Journal of Turbomachinery , 2011, 133(3).
[6] Bohn D, Rudzinski B, Surken N, et al. Experimental and Numerical Investigation of the Influence of Rotor Blades on Hot Gas Ingestion into the Upstream Cavity of an Axial Turbine Stage[J]. ASME 2000-GT-284.
[7] Hills N J, Chew J W, Turner A B. Computational and Mathematical Modeling of Turbine Rrim Seal Ingestion[J]. Journal of Turbomachinery, 2002, 124(2): 306-315.
[8] Mirzamoghadam A V, Heitland G, Morris M C, et al. 3D CFD Ingestion Evaluation of a High Pressure Turbine Rim Seal Disk Cavity[R]. ASME GT-2008-50531.
[9] Mirzamoghadam A V, Heitland G, Hosseini K M. The Effect of Annulus Performance Parameters on Rotor-Stator Cavity Sealing Flow[R]. ASME GT-2009-59380.
[10] Cao C, Chew J W, Millington P R, et al. Interaction of rim Seal and Annulus Flows in an Axial Flow Turbine[J]. Journal of Engineering for Gas Turbines and Power, 2004, 126(4): 786-793.
[11] Jakoby R, Zierer T, Lindblad K, et al. Numerical Simulation of the Unsteady Flow Field in an Axial Fas Turbine Rim Seal Configuration[R]. ASME GT-2004-53829.
[12] 邱绪光. 实用相似理论[M]. 北京: 北京航空学院出版社, 1988.
[13] 周昆原, 罗翔, 徐国强. 旋转诱导燃气入侵的数值模拟[J]. 航空动力学报, 2011, 26(12): 2704-2709.
[14] 于勇, 张俊明, 姜连. FLUENT 入门与进阶教程[M]. 北京:北京理工大学出版社, 2008.
[15] Phadke U P, Owen J M. Aerodynamic Aspects of the Sealing of Gas-Turbine Rotor-Stator Systems: Part 1: The Behavior of Simple Shrouded Rotating-Disk Systems in a Quiescent Environment[J]. International Journal of Heat and Fluid Flow, 1988, 9(2): 98-105.
[16] Wang C Z, Johnson B V, De Jong F, et al. Comparison of Flow Characteristics in Axial-Gap Seals for Close-and Wide-Spaced Turbine Stages[R]. ASME 2007-GT 27909.(编辑:朱立影) 收稿日期:2013-08-28;修订日期:2013-12-20。作者简介:朱莉娅(1990—),女,硕士生,研究领域为发动机性能及涡轮部件热防护。E-mail:zhuliya123@gmail.com
|