基于扩展TAB模型的凝胶液滴二次雾化特性研究

推进技术 ›› 2015, Vol. 36 ›› Issue (11): 1734-1740.

基于扩展TAB模型的凝胶液滴二次雾化特性研究

邓寒玉¹,封锋¹,武晓松¹,卓长飞¹,曹琪¹,杨绪钊²

南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,北京精密机电控制设备研究所，北京 100076

发布日期:2021-08-15
作者简介:邓寒玉(1988—)，男，博士生，研究领域为凝胶推进剂的雾化与燃烧。E-mail: dhy19890120@163.com 通讯作者:封锋(1982—)，男，博士，副教授，研究领域为航空航天推进理论与工程。
基金资助:
航天科技创新基金(CASC03-02)；中央高校基本科研业务费专项基金 (30920140112001)。

Characteristics of Second Atomization for Gelled Droplet Based on Extended TAB Model

School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China and Beijing Precision Electromechanical Control Equipment Research Institute，Beijing 100076，China

Published:2021-08-15

摘要/Abstract

摘要： 为初步研究幂率型凝胶液滴的二次雾化特性，将原始的Taylor-analogy-breakup(TAB)模型扩展并应用到幂率型凝胶颗粒中，采用四阶Runge-Kutta法对凝胶液滴的振荡方程和运动方程进行了数值求解，计算了不同空气动力和物性参数条件下的初始破碎时间和临界特征。结果表明:随着相对速度和液滴直径的增加，初始破碎时间迅速降低，然后保持稳定；随液/气密度比和表面张力系数增大，初始破碎时间呈线性增长趋势；初始破碎时间随稠度系数增大而增大，而当流动指数较小时初始破碎时间变化很小，流动指数超过0.6后初始破碎时间增长迅速，二者与相关实验比较存在一定误差；随Web数增大，液滴的振荡幅度变大，达到稳定后其无量纲变形系数就越大；凝胶液滴的稠度系数越高，临界Webc数越大，液滴二次雾化能力越低。流动指数小于0.6时，临界Webc数变化较小，而后其值则迅速上升。

关键词: 凝胶液滴；二次雾化；TAB模型；初始破碎时间

Abstract: In order to primarily study the characteristics of secondary atomization of gelled power-law droplet，the original Taylor-analogy-breakup(TAB) was extended and applied to the gelled power-law droplet. The equations of oscillation and motion of the gelled droplet was numerically solved using the fourth order Runge - Kutta method. Initial breakup time and critical characteristics were calculated under different aerodynamic and physical parameters. The relative results indicate that initial breakup time rapidly decreased with the increase of relative velocity and diameter of the droplet，and then remained stable. As the increase of liquid/gas density ratio and surface tension coefficient，a linear growth rate was revealed about the initial time. With the growing number of consistency index，initial breakup time increased. However，as the flow index was on the small side，the change of initial breakup time was small as well and grew fast when the flow index was in the excess of 0.6. There was a certain deviation in the comparison between both of them and the related experiment. Oscillation amplitude of the droplet became larger by promoting the Weber number，and also its dimensionless deformation coefficient was larger when the droplet became stable. Higher critical Weber number under higher consistency index of the gelled droplet resulted in lower ability of secondary atomization. The critical Weber number nearly stayed the same when flow index was lower than 0.6，but rose quickly while exceeded this number.

Key words: Gelled droplet；Secondary atomization；TAB model；Initial breakup time

邓寒玉,封锋,武晓松,卓长飞,曹琪,杨绪钊. 基于扩展TAB模型的凝胶液滴二次雾化特性研究[J]. 推进技术, 2015, 36(11): 1734-1740.

DENG Han-yu¹,FENG Feng¹,WU Xiao-song¹,ZHUO Chang-fei¹,CAO Qi¹,YANG Xu-zhaO². Characteristics of Second Atomization for Gelled Droplet Based on Extended TAB Model[J]. Journal of Propulsion Technology, 2015, 36(11): 1734-1740.

参考文献

[1] 强洪夫, 夏学礼. 凝胶推进剂管道流动特性影响因素数值分析[J]. 含能材料, 2009, 17(2): 137-142.
[2] 张蒙正, 左博. 幂律型凝胶推进剂管路中的流动特性[J]. 推进技术, 2009, 30(2): 246-250. (ZHANG Meng-zheng, ZUO Bo. Flow Behavior of Power Law Model Gelled Propellant in the Pipe[J]. Journal Propulsion Tecchnology, 2009, 30(2): 246-250.)
[3] Orourke P J, Amsden A A. The TAB Method for Numerical Calculation of Spray Droplet Breakup[C]. Toronto: Presented at the International Fuels and Lubricants Meeting and Exposition, 1987.
[4] Ibrahim E A, Yang H Q, Przekwas A J. Modeling of Spray Droplets Deformation and Breakup[J]. Journal of Propulsion and Power, 1993, 9(4): 651-654.
[5] Lee C S, Kim H J, Park S W. Atomization Characteristics and Prediction Accuracies of Hybrid Break-up Models for a Gasoline Direct Injection Spray[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2004, 218(9): 1041-1053.
[6] Park J H, Yoon Y, Hwang S S. Improved TAB Model for Prediction of Spray Droplet Deformation and Breakup[J]. Atomization and Sprays, 2002, 12(4): 387-401.
[7] 刘晨. 复杂燃烧流场数值模拟方法研究[D]. 南京:南京航空航天大学, 2009.
[8] Guildenbecher D R, López-Rivera C, Sojka P E. Secondary Atomization[J]. Experiments in Fluids, 2009, 46(3): 371-402.
[9] Taylor G I. The Shape and Acceleration of a Drop in a High Speed Air Stream[J]. The Scientific Papers of GI Taylor, 1963, 3: 457-464.
[10] Shai Rahimi, Dov Hasan, Arie Peretz, et al. Preparation and Characterization of Gel Propellants and Simulants[R]. AIAA 2001-3264.
[11] 武晓松, 陈军, 王栋. 固体火箭发动机原理[M].北京:兵器工业出版社, 2011: 257-258.
[12] Nicholls J A, Ranger A A. Aerodynamic Shattering of Liquid Drops[J]. AIAA Journal, 1969, 7(2): 285-290.
[13] Travis Daniel Kubal. Characterization of Rheological and Ignition Properties of Hypergolic Propellants[D].Indiana: Purdue University, 2010.
[14] Hwang S S, Liu Z, Reitz R D. Breakup Mechanisms and Drag Coefficients of High-Speed Vaporizing Liquid Drops[J]. Atomization and Sprays, 1996, 6(3): 353-376.
[15] Rahimi S, Hasan D, Peretz A. Development of Laboratory-Scale Gel Propulsion Technology[J]. Journal of Propulsion and Power, 2004, 20(1): 93-100.
[16] Mallory J A. Jet Impingement and Primary Atomization of Non-Newtonian Liquids[D]. Indiana: Purdue University, 2013.
[17] Lopez Rivera C. Secondary Breakup of Inelastic Non-Newtonian Liquid Drops[D]. Indiana: Purdue University, 2010.
[18] Sharon E Snyder. Secondary Atomization of Elastic Non-Newtonian Liquid Drops[R]. AIAA 2010-6822.
[19] Gelfand B E. Droplet Breakup Phenomena in Flows with Velocity Lag[J]. Progress in Energy and Combustion Science, 1996, 22(3): 201-265.
[20] Brodkey R S. Formation of Drops and Bubbles[M].USA: Addison-Wesley, 1967.(编辑:梅瑛)　　　　　　　　　　　　　*　收稿日期:2014-07-04；修订日期:2014-09-03。基金项目:航天科技创新基金(CASC03-02)；中央高校基本科研业务费专项基金 (30920140112001)。作者简介:邓寒玉(1988—),男,博士生,研究领域为凝胶推进剂的雾化与燃烧。E-mail: dhy19890120@163.com通讯作者:封锋(1982—),男,博士,副教授,研究领域为航空航天推进理论与工程。E-mail: nust203@aliyun.com