碳/酚醛燃气舵热化学烧蚀过程数值研究

推进技术 ›› 2016, Vol. 37 ›› Issue (10): 1900-1908.

碳/酚醛燃气舵热化学烧蚀过程数值研究

薛海峰,陈雄,周长省

南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094,南京理工大学机械工程学院，江苏南京 210094

发布日期:2021-08-15
作者简介:薛海峰，男，博士生，研究领域为复合材料燃气舵传热烧蚀。

Numerical Research of Thermochemical Ablation about Carbon-Phenolic Jet Vane in Solid Rocket Motors

School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China,School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China and School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究碳/酚醛燃气舵热化学烧蚀问题，在Fluent平台上采用UDF二次开发方法，对碳/酚醛燃气舵二维非定常流固热耦合过程进行了数值仿真研究。对几何建模、边界条件、热解气体逸出过程以及热化学烧蚀导致的边界退移等问题进行了详尽的描述，并选取了合适的计算模型。对不同舵偏角下燃气舵温度分布、热解气体逸出通量以及热化学烧蚀等问题进行了分析研究。结果表明:燃气舵表面化学反应以及热解气体的逸出过程能够有效降低燃气舵壁面以及内部温度，下降温度最高值约为325K；燃气舵前缘一直是热化学烧蚀最严重区域，达到0.5mm，迎风面烧蚀量次之，而背风面几乎不存在热化学烧蚀现象；迎风面热化学烧蚀会随着舵偏角的增大而变得更为严重。

关键词: 碳/酚醛；燃气舵；流固热耦合；热化学烧蚀

Abstract: To solve the problem of thermochemical ablation about carbon-phenolic jet vane，a numerical research on two-dimensional unsteady fluid-solid-thermal coupling was done using secondary development on Fluent platform by UDF. Geometric model，boundary conditions，evolution process of pyrolysis gas as well as surface retired due to thermochemical ablation were described carefully，and a suitable numerical model was selected. Temperature distribution of jet vane，mass flux of pyrolysis gas and thermochemical ablation at different deflection angles were analyzed. The results show that，thermochemical reactions on surface and evolution of pyrolysis gas can help reducing surface and interior temperature of jet vane，the highest temperature reduction is about 325K. Leading edge is always the most serious thermochemical ablative area of jet vane at about 0.5mm followed by upwind side，however，there is almost none surface ablation on leeward side. As the deflection angle of jet vane increases，ablation of upwind side becomes much more serious.

Key words: Carbon-phenolic；Jet vane；Fluid-solid-thermal coupling；Thermochemical ablation

薛海峰,陈雄,周长省. 碳/酚醛燃气舵热化学烧蚀过程数值研究[J]. 推进技术, 2016, 37(10): 1900-1908.

XUE Hai-feng,CHEN Xiong,ZHOU Chang-sheng. Numerical Research of Thermochemical Ablation about Carbon-Phenolic Jet Vane in Solid Rocket Motors[J]. Journal of Propulsion Technology, 2016, 37(10): 1900-1908.

参考文献

[1] 刘志珩. 固体火箭燃气舵气动设计研究[J]. 导弹与航天运载技术, 1995 (4): 9-17.
[2] Chen B, Zhang L T, Cheng L F, et al. Erosion Resistance of Needled Carbon/Carbon Composites Exposed to Solid Rocket Motor Plumes[J]. Carbon, 2009, 47(6): 1474-1479.
[3] 刘丽丽, 李克智, 李贺军. 基于有限元的C/C燃气舵振动特性[J]. 玻璃钢/复合材料, 2011, 216: 12-15.
[4] Kumar S, Kumar A, Sampath K, et al. Fabrication and Erosion Studies of C-SiC Composite Jet Vanes in Solid Rocket Motor Exhaust[J]. Journal of the European Ceramic Society, 2011, 31(13): 2425-2431.
[5] Bansard S, Plouvier S. Experimental Simulation of Thermo-Mechanical Ablation of Carbon/Phenolic Composite Under the Impact of Liquid Alumina Particles[J]. High Temperature Material Processes, 2005, 9(3).
[6] 王德文, 查柏林, 杨月诚, 等. C/C复合材料在再入模拟环境中烧蚀性能研究[J]. 推进技术, 2014, 35(8): 1080-1085. (WANG De-wen, CHA Bai-lin, YANG Yue-cheng, et al. Ablation Characteristics of C/C Composites in Reentry Simulation Conditions[J]. Journal of Propulsion Technology, 2014, 35(8): 1080-1085.)
[7] Yu M S, Lee J W, Cho H H, et al. Numerical Study on a Thermal Response of the Jet Vane System in a Rocket Nozzle[R]. AIAA 2004-997.
[8] 董晓芳. 固体火箭发动机燃气舵热分析研究[D]. 西安:西北工业大学, 2005.
[9] 李军, 常见虎, 周长省, 等. 推力矢量燃气舵三维气-固两相流的数值分析[J]. 南京理工大学学报(自然科学版), 2008, 32(5): 565-569.
[10] Yu M S, Cho H H, Hwang K Y, et al. A Study on A Surface Ablation of the Jet Vane System in a Rocket Nozzle[R]. AIAA 2004-2276.
[11] 马伟. 酚醛树脂的热解研究[D]. 重庆:重庆大学, 2007.
[12] Ryan Gosse, Edward Alyanak. Micro-Mechanical Ablation of Carbon-Carbon Materials[R]. AIAA 2009-1564.
[13] 薛海峰, 陈雄, 周长省. 基于热解过程的变热物性碳/酚醛能量扩散数值研究[J]. 固体火箭技术, 2015, 38(1): 130-135.
[14] 罗永康, 彭维舟, 王为民. 烧蚀复合材料用酚醛树脂研究[J]. 宇航材料工艺, 1988, 5.
[15] 张健. 煤粉燃烧/气化边界层反应的数值模拟及其在湍流环境中的跨尺度应用[D]. 上海:上海交通大学, 2010.
[16] 薛海峰, 陈雄, 郑健, 等. 基于热解动力学碳/酚醛燃气舵流热耦合数值研究[J]. 固体火箭技术, 2015, (4): 503-509.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2015-05-21；修订日期:2015-07-01。作者简介:薛海峰,男,博士生,研究领域为复合材料燃气舵传热烧蚀。E-mail: liangwangongli@163.com