高温氧化铝液滴沉积条件下绝热材料烧蚀特性研究

推进技术 ›› 2017, Vol. 38 ›› Issue (8): 1833-1839.

高温氧化铝液滴沉积条件下绝热材料烧蚀特性研究

关轶文,李江,刘洋

西北工业大学燃烧、热结构与内流场重点实验室，陕西西安 710072,西北工业大学燃烧、热结构与内流场重点实验室，陕西西安 710072,西北工业大学燃烧、热结构与内流场重点实验室，陕西西安 710072

发布日期:2021-08-15
作者简介:关轶文，男，博士生，研究领域为固体火箭燃烧、流动和热结构。
基金资助:
国家自然科学基金资助项目NSFC(51576165；51276150)；中央高校基本科研业务费(3102014ZD0032)。

Ablation Characteristics of Insulation Material under High Temperature Alumina Droplet Deposition Condition

National Key Laboratory of Combustion，Flow and Thermo-Structure，Northwestern Polytechnical University，Xi’an 710072，China,National Key Laboratory of Combustion，Flow and Thermo-Structure，Northwestern Polytechnical University，Xi’an 710072，China and National Key Laboratory of Combustion，Flow and Thermo-Structure，Northwestern Polytechnical University，Xi’an 710072，China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究三元乙丙绝热材料在高温氧化铝液滴沉积条件下的烧蚀特性，基于模拟沉积实验装置，开展了烧蚀实验研究。利用SEM与XRD等分析了烧蚀后炭化层断面形貌特征和化学组分分布，探讨了火箭发动机工作环境中氧化铝液滴与炭化层间热化学烧蚀的主要反应机理，确定了沉积条件下的化学反应方程式。研究结果表明:(1)高温氧化铝沉积条件下，三元乙丙绝热材料材料炭化层断面呈现“致密/疏松”的多孔结构；(2)推导并建立了固体火箭发动机高温高压环境中氧化铝与炭化层的七步热化学反应方程；(3)利用热力学软件分析可知，发动机工作条件下氧化铝与炭化层反应首先生成Al4C3，随着温度的升高继而生成Al单质与碳-氧-铝化合物Al2OC并释放出还原性CO气体。

关键词: 固体火箭发动机；绝热层；沉积；烧蚀；实验装置

Abstract: In order to investigate the ablation characteristics and mechanism of EPDM insulation material in high temperature alumina droplet deposition condition，based on the lab-scale experimental device，the ablation experiment was performed. SEM and XRD were used to analyze the surface morphology and chemical composition of the charring layer after ablation experiment，the main reaction mechanism of the alumina droplet and charring layer in Solid Rocket Motor (SRM) operating condition was discussed，then the chemical reaction equation under deposition condition was determined. The results shows that: (1) the EPDM insulation material charring layer section presents porous structure of “tight/loose” under the condition of alumina droplet deposition. (2) The seven-step thermo-chemical reaction equation of alumina and charring layer in high temperature and high pressure environment of SRM was deduced and established. (3) Thermodynamic analysis shows that under the SRM operating condition，the reaction of alumina and charring layer first formed Al4C3，with the temperature increased，Al elemental and carbon-oxygen-aluminum compound Al2OC were formed and then released the gas of CO.

Key words: Solid rocket motor(SRM)；Insulation material；Deposition；Ablation；Experimental device

关轶文,李江,刘洋. 高温氧化铝液滴沉积条件下绝热材料烧蚀特性研究[J]. 推进技术, 2017, 38(8): 1833-1839.

GUAN Yi-wen,LI Jiang,LIU Yang. Ablation Characteristics of Insulation Material under High Temperature Alumina Droplet Deposition Condition[J]. Journal of Propulsion Technology, 2017, 38(8): 1833-1839.

参考文献

[1] 殷兴良, 申世光. 构造快速进入空间和应用空间的能力[J]. 中国航天, 2002, (2): 24-25.
[2] 向红军. 固体火箭发动机熔渣沉积数值模拟与实验研究[D]. 北京:北京航空航天大学, 2000.
[3] Yang B C, Cheung F B, Koo J H. Numerical Investigation of Thermochemical and Mechanical Erosion of Ablative Materials [R]. AIAA 93-2045.
[4] Borie V, Bruladr J, Lengelle G. Aerothermochemical Analysis of Carbon-Carbon Nozzle Regression in Solid-Propellant Rocket Motors[J]. Journal of Propulsion and Power, 1989, 5(6): 665-673.
[5] Shih Y C, Cheung F B. Numerical Study of the Thermal Response of High-Temperature Ablative Materials[J]. Numerical Heat Transfer Part A Applications an International Journal of Computation & Methodology, 1997, 32(6): 555-574.
[6] 何洪庆, 冯喜平, 虞企鹤. 火箭喷管硅基内衬的液体层烧蚀模型[J]. 西北工业大学学报, 1989, (1):1-10.
[7] 何洪庆, 周旭. 石墨渗铜材料的烧蚀模型探索[J]. 固体火箭技术, 1991, (4): 102-107.
[8] 何洪庆, 周旭. 固体火箭喷管中的烧蚀控制机制[J]. 推进技术, 1993, 14(4): 36-41. (HE Hong-qing, ZHOU Xu. Ablative Conttrol Mechanism In Solid Rocket Nozzle[J]. Journal of Propulsion Technology, 1993, 14(4): 36-41.)
[9] 何洪庆. 固体火箭发动机气体动力学[M]. 西安:西北工业大学出版社, 1988.
[10] 刘洋, 李江, 杨飒, 等. 过载条件下EPDM绝热材料烧蚀机理和模型研究(Ⅰ)——烧蚀机理分析[J]. 固体火箭技术, 2011, 34(2): 229-233.
[11] 王书贤, 何国强, 刘佩进, 等. 气相燃气速度对EPDM绝热材料烧蚀的影响[J]. 推进技术, 2010, 31(2): 235-239. (WANG Shu-xian, HE Guo-qiang, LIU Pei-jin, et al. Effects of Gas-Phase Speed on EPDM Insulator Ablation [J]. Journal of Propulsion Technology, 2010, 31(2): 235-239.)
[12] 李志永, 陈静敏, 郑日恒, 等. 冲压发动机C/SiC喷管沉积特性研究[J]. 推进技术, 2013, 34(12). (LI Zhi-yong, CHEN Jing-min, ZHENG Ri-heng, et al. Investigation on Deposit Property of C/SiC Composite Nozzle for Ramjet[J]. Journal of Propulsion Technology, 2013, 34(12).)
[13] Yi-wen GUAN, Yang LIU, Jiang LI, et al. Investigation on Ablation Characteristic of EPDM Insulator Under High Temperature Al2O3 Deposition Condition in SRM [C]. Wuhan: 2016 International Conference on Materials Science and Engineering Application (ICMSEA 2016), 2016.
[14] 魏超, 侯晓. 潜入喷管背壁区熔渣沉积的机理分析与数值模拟[J]. 航空动力学报, 2006, 21(6):1109-1115.
[15] 李强, 甘晓松, 刘佩进, 等. 大型固体发动机潜入式喷管背壁区域熔渣沉积数值模拟[J]. 固体火箭技术, 2010, 33(2): 148-151.
[16] 关轶文. 氧化铝液滴沉积条件下绝热材料烧蚀特性研究[D]. 西安:西北工业大学, 2016.
[17] 陈剑, 李江, 李强, 等. EPDM绝热材料炭化层结构特征及其对烧蚀的影响[J]. 固体火箭技术, 2011, 34(1): 122-125.
[18] 冯月斌, 杨斌, 戴永年. 固态氧化铝碳热还原反应研究进展[J]. 中国有色金属学报, 2013, (3): 866-872.
[19] Lefort P, Billy M. Mechanism of Aln Formation Through the Carbothermal Reduction of Al2O3 in a Flowing N2 Atmosphere [J]. Journal of the American Ceramic Society, 1993, 76(9): 2295-2299.
[20] Katskov D A, Shtepan A M, Grinshtein I L, et al. Atomization of Aluminium Oxide in Electrothermal Atomic Absorption Analysis[J]. Spectrochimica Acta Part B Atomic Spectroscopy, 1992, 47(8): 1023-1041.
[21] 袁海滨, 朱富龙, 杨斌, 等. 氧化铝真空碳热还原-氯化法炼铝的工艺研究[J]. 真空科学与技术学报, 2010, 30(6): 582-587.
[22] 何洪庆, 严红. EPDM的烧蚀模型[J]. 推进技术, 1999, 20(4): 36-39. (HE Hong-qing, YAN Hong. Ablation Model of EPDM[J]. Journal of Propulsion Technology, 1999, 20(4): 36-39.)　　　　　　　　　　　　　　收稿日期:2016-09-22；修订日期:2016-10-24。基金项目:国家自然科学基金资助项目NSFC(51576165；51276150)；中央高校基本科研业务费(3102014ZD0032)。作者简介:关轶文,男,博士生,研究领域为固体火箭燃烧、流动和热结构。E-mail: gyw@mail.nwpu.edu.cn(编辑:田佳莹)