基于变刚度特性的轴流压气机叶型重构方法研究

推进技术 ›› 2017, Vol. 38 ›› Issue (8): 1857-1862.

基于变刚度特性的轴流压气机叶型重构方法研究

钟兢军,康达,王永亮,刘子豪

大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026,大连海事大学轮机工程学院，辽宁大连 116026

发布日期:2021-08-15
作者简介:钟兢军，男，博士，教授，研究领域为叶轮机械气动热力学。
基金资助:
国家自然科学基金重点项目(51436002)；辽宁省自然科学基金(2015020130)；辽宁省高等学校创新团队支持计划资助项目(LT2015004)；中央高校基本科研业务费专项资金资助(3132016016)。

A Reconstruction Method for Axial Compressor Blade Based on Variable Stiffness

Marine Engineering College，Dalian Maritime University，Dalian 116026，China,Marine Engineering College，Dalian Maritime University，Dalian 116026，China,Marine Engineering College，Dalian Maritime University，Dalian 116026，China and Marine Engineering College，Dalian Maritime University，Dalian 116026，China

Published:2021-08-15

摘要/Abstract

摘要： 为能准确预估轴流压气机叶片在工作状态下的形状，基于流固耦合迭代策略，考虑离心力和气动力对叶片变形的作用，发展了一种适用于轴流压气机的叶型重构方法。在构型转化过程中，计入了叶片受力载荷随叶型变化的非线性效应以及叶片的变刚度特性。采用叶片变形后状态的受力载荷与刚度矩阵计算叶片节点位移，反复迭代修正热态叶片形状，最终获得满足精度要求的热态叶型数据。利用所提出的方法，对Stage 37的转子叶片进行了叶型重构，经20步迭代计算可获得最大残差小于10-4mm量级的热态叶型，通过与试验数据的对比分析，验证了重构算法的可靠性和工程实用性。

关键词: 压气机；叶型重构；流固耦合；变刚度特性

Abstract: A novel method for accurate estimation of axial compressor blade shape during operation is presented based on fluid-structure coupling iterative algorithm，considering the effects of centrifugal and aerodynamic force on the blade deflection. During the blade configuration transformation，the blade nodal displacements are calculated using the force loadings and stiffness matrix of deformed blade. It is capable of accounting for the nonlinear force loadings and variable stiffness due to the blade deformation. The hot blade profile that satisfies the required precision is obtained by modifying nodal coordinates iteratively. The method is used to reconstruct the operating shape of Stage 37 rotor blade. The hot blade shape can be obtained within 20 iteration steps. The maximum residual is less than 10-4mm. Comparison with experimental results shows that the reconstruction method is reliable and practical in engineering.

Key words: Compressor；Blade reconstruction；Fluid-structure interaction；Variable stiffness

钟兢军,康达,王永亮,刘子豪. 基于变刚度特性的轴流压气机叶型重构方法研究[J]. 推进技术, 2017, 38(8): 1857-1862.

ZHONG Jing-jun,KANG Da,WANG Yong-liang,LIU Zi-hao. A Reconstruction Method for Axial Compressor Blade Based on Variable Stiffness[J]. Journal of Propulsion Technology, 2017, 38(8): 1857-1862.

参考文献

[1] Gaolian Liu. A New Generation of Inverse Shape Design Problem in Aerodynamics and Aerothermoelasticity: Concepts, Theory and Methods[J]. Aircraft Engineering and Aerospace Technology, 2000, 72(4): 334-344.
[2] 陈懋章. 风扇/压气机技术发展和对今后工作的建议[J]. 航空动力学报, 2002, 17(1): 1-15.
[3] Roberto Biollo, Ernesto Benini. Recent Advances in Transonic Axial Compressor Aerodynamics[J]. Progress in Aerospace Sciences, 2013, 56(1): 1-18.
[4] Paul Louis Mikrut. Vibration of Axial Turbomachinery Blades:Measurement and Fluid- Structure Interactions[D]. Indiana, The University of Notre Dame, 2012.
[5] 赵胜丰, 卢新根, 朱俊强. 雷诺数对跨声速压气机转子内部流动失稳触发机理的影响[J]. 推进技术, 2013, 34(1): 25-30. (ZHAO Sheng-feng, LU Xin-gen, ZHU Jun-qiang. Effects of Reynolds Number on the Instability Inception Mechanism of a Transonic Compressor[J]. Journal of Propulsion Technology, 2013, 34(1): 25-30.)
[6] 张龙新, 杜鑫, 丁骏, 等. 子午造型对低反动度跨声速转子气动性能影响[J]. 推进技术, 2014, 35(9): 1234-1240. (ZHANG Long-xin, DU Xin, DING Jun, et al. Effects of Meridional Channel Contouring on Aerodynamic Performance of a Low-Reaction Transonic Rotor[J]. Journal of Propulsion Technology, 2014, 35(9): 1234-1240.)
[7] 付磊, 宋西镇, 袁巍, 等. 跨声速压气机转子叶尖非定常流场数值研究[J]. 航空动力学报, 2013, 28(12): 2821-2828.
[8] Laith Zori, Paul Galpin, Rubens Campregher, et al. Time Transformation Simulation of 1.5 Stage Transonic Compressor[R]. ASME GT 2015-43624.
[9] Srivastava R, Lakshmi N Sankar, Reddy T S R, et al. Application of an Efficient Hybrid Scheme for Aeroelastic Analysis of Advanced Propellers[J]. Journal of Propulsion and Power, 1991, 7(5): 767-775.
[10] Yamamoto O, August R. Structural and Aerodynamic Analysis of a Large-Scale Advanced Propeller Blade[J].Journal of Propulsion and Power, 1992, 8(2): 367-373.
[11] Aparajit J Mahajan, George L Stefko. An Iterative Multidisciplinary Analysis for Rotor Blade Shape Determination[R]. AIAA 93-2085.
[12] Kalles?e B S, Hansen M H. Some Effects of Large Blade Deflections on Aeroelastic Stability[R]. AIAA 2009-839.
[13] Hamid Hazby, Ian Woods, Michael Casey, et al. Effects of Blade Deformation on the Performance of a High Flow Coefficient Mixed Flow Impeller[J]. ASME Journal of Turbomachinery, 2015, 137(12).
[14] 郑赟, 田晓, 杨慧. 跨声速风扇叶片变形对气动性能的影响[J]. 航空动力学报, 2011, 26(7): 1621-1627.
[15] 杨慧, 沈真, 郑赟. 叶片反扭对跨声速大涵道比风扇性能的影响[J]. 航空动力学报, 2016, 31(1): 100-105.
[16] Lonnie Reid, Royce D Moore. Design and Overall Performance of Four Highly Loaded, High-Speed Inlet Stages for an Advanced High-Pressure-Ratio Core Compressor[R]. NASA-TP-1337, 1978.
[17] Dunham J. CFD Validation for Propulsion System Components[R]. AGARD-AR-355, 1998.　　　　　　　　　　　　　　收稿日期:2016-04-19；修订日期:2016-06-22。基金项目:国家自然科学基金重点项目(51436002)；辽宁省自然科学基金(2015020130)；辽宁省高等学校创新团队支持计划资助项目(LT2015004)；中央高校基本科研业务费专项资金资助(3132016016)。作者简介:钟兢军,男,博士,教授,研究领域为叶轮机械气动热力学。E-mail: zhongjj@dlmu.edu.cn(编辑:梅瑛)