高转速小尺寸涡轮叶片动应力测量方法与应用

推进技术 ›› 2018, Vol. 39 ›› Issue (6): 1406-1411.

高转速小尺寸涡轮叶片动应力测量方法与应用

王奉明^1,2,3,贺进⁴,朱俊强^1,2

中国科学院工程热物理研究所，北京 100190; 中国科学院大学，北京 100190; 中国航空发动机研究院，北京 101304,中国燃气涡轮研究院，四川成都 610500,中国科学院工程热物理研究所，北京 100190; 中国科学院大学，北京 100190

发布日期:2021-08-15

Measurement Method and It’s Application on Dynamical Stress of a High-Speed Small-Size Turbine Blades

Institute of Engineering Thermo Physics，Chinese Academy of Sciences，Beijing 100190，China;University of the Chinese Academy of Sciences，Beijing 100190，China;Aero Engine Academy of China，Beijing 101304，China,China Gas Turbine Establishment，Chengdu 610500，China and Institute of Engineering Thermo Physics，Chinese Academy of Sciences，Beijing 100190，China;University of the Chinese Academy of Sciences，Beijing 100190，China

Published:2021-08-15

摘要/Abstract

摘要： 根据小推力发动机涡轮叶片动应力测量试验要求，提出了一种基于引电器的高温环境旋转件动应力测量系统方案，以实现高温度条件下高转速、小尺寸涡轮叶片的动应力测量。详细阐述了测量系统组成及关键技术，并利用该系统完成了高压涡轮叶片的动应力测量，试验过程中，测试系统工作稳定，信号频率跟随性良好。试验结果表明，该型发动机转速在34920r/min时叶片振动应力达到112.7MPa，会带来涡轮叶片的高循环疲劳损伤。

关键词: 小推力；高循环疲劳；涡轮叶片；振动；动应力测量

Abstract: In order to satisfy the test requirement for the turbine blade dynamical stress measurment of a certain low thrust aero-engine， the paper proposes a test scheme based on the electrical leads for the dynamical stress measuring of the rotating parts in high-temperature environment， which can be applied to the test of high-speed small-size turbine blades. Firstly， the test system and key technologies are elaborated in detail， then dynamical stress measuring for the HP turbine blade is accomplished. In the process of the test， this test system works well and has a perfect ability of frequency track. The results show that blade dynamical stress reaches 112.7MPa at the rotation speed 34920r/min， which may lead to the high cycle fatigue failure of the turbine blade.

Key words: Low thrust；High cycle fatigue；Turbine blades；Vibration；Dynamic stress measurements

王奉明,贺进,朱俊强. 高转速小尺寸涡轮叶片动应力测量方法与应用[J]. 推进技术, 2018, 39(6): 1406-1411.

WANG Feng-ming^1,2,3,HE Jin⁴,ZHU Jun-qiang^1,2. Measurement Method and It’s Application on Dynamical Stress of a High-Speed Small-Size Turbine Blades[J]. Journal of Propulsion Technology, 2018, 39(6): 1406-1411.

参考文献

[1] Srinivasan A V. Vibrations of Bladed-Disk Assemblies-A Selected Survey[J]. ASME Joural of Vibration, Acousties, Stress, and Reliability in Design, 1984, 106: 165-168.
[2] Srinivasan A V. Flutter and Resonant Vibration Characteristics of Engine Blade[J]. ASME Joumal of Engineering for Gas Turbines and Power, 1997, 119: 742-775.
[3] Thomson D. US HCF Program Overview[C]. New Orleans: 10th National Turbine Engine High Cyclic Fatigue Conference, 2005.
[4] Cifone A. Keynote Address[C]. New Orleans: 10th National Turbine Engine High Cyclic Fatigue Conference, 2005.
[5] 黄春峰, 候敏杰, 石小江. 航空发动机振动测量技术方法研究[J]. 测控技术, 2009, 28(增刊): 21-26.
[6] DeAnna R G, Wireless Telemetry for Gas-Turbine Engine[R]. NASA/TM-2000-209815, 2000.
[7] Long S A, Edney S L, Reiger P A, et al. Telemetry System Integrated in a Small Gas Turbine Engine[J]. Journal of Engineering for Gas Turbines & Power, 2012, 134(4): 1-5.
[8] 王宇华, 段发阶, 叶声华, 等. 涡轮叶片振动的非接触测量[J]. 宇航计测技术, 2002, 22(2): 20-24.
[9] 孙亮志. 基于光纤光栅传感的旋转叶片振动测试与分析[D]. 武汉:武汉理工大学, 2013.
[10] 滕丽娜, 佟德纯, 陈兆能. 汽轮机叶片动频的非接触间断测量法[J]. 振动测试与诊断, 2000, 20(4): 279-282.
[11] 吴岳庚, 龚寅生, 张松林. 某压气机叶片动频测量的试验研究[J]. 燃气涡轮试验与研究, 1999, 12(4): 58-62.
[12] 彭建, 刘兵. 压气机转子叶片动频动应力测试技术和应用研究[J]. 燃气涡轮试验与研究, 2003, 16(1): 10-13.
[13] 卢艳辉, 梅庆, 雷沫枝, 等. 高转速压气机转子叶片的动应力测试与动力学设计评估[J]. 推进技术, 2014, 35(10): 1398-1403. (LU Yan-hui, MEI Qing, LEI Mo-zhi, et al. Vibration Stress Test and Dynamical Evaluation for High Rotational Speed Compressor Blades Through Numerical and Experimental Method[J]. Journal of Propulsion Technology, 2014, 35(10): 1398-1403.)
[14] 曹昆华, 黄家经. 某型发动机低压涡轮转子叶片动测技术及应用研究[J]. 燃气涡轮试验与研究, 2008, 21(1): 22-25.
[15] 李仙丽, 罗乘川, 安奕忱, 等. 基于遥测技术的发动机涡轮转子叶片动应力测量[J]. 燃气涡轮试验与研究, 2014, (6): 53-56.
[16] 刘美茹, 朱靖, 滕光蓉, 等. 非接触旋转叶片振动测量系统在转子叶片裂纹故障试验中的应用[J]. 燃气涡轮试验与研究, 2015, (4): 45-52.
[17] 蔡宁泊, 侯乃先, 张成成. 航空发动机振动应力测量的贴片可靠性及优化分析[J]. 推进技术, 2016, 37(10): 1964-1969. (CAI Ning-bo, HOU Nai-xian, ZHANG Cheng-cheng. Reliability and Optimization Analysis of Strain-Gauge[J]. Journal of Propulsion Technology, 2016, 37(10): 1964-1969.)(编辑:田佳莹)　　　　　　　　　　　　　*　收稿日期:2017-05-21；修订日期:2017-06-30。通讯作者:王奉明, 男,博士,高工,研究领域为航空发动机总体设计。E-mail: wfm7979@163.com