螺旋管式空气-空气换热器的设计和实验研究

doi:10.13675/j.cnki.tjjs.190688

推进技术 ›› 2021, Vol. 42 ›› Issue (5): 1087-1093.DOI: 10.13675/j.cnki.tjjs.190688

螺旋管式空气-空气换热器的设计和实验研究

刘银龙¹，付衍琛¹，闻洁¹，亓绍帅²

1.北京航空航天大学能源与动力工程学院，北京 100191;2.中国航天空气动力技术研究院，北京 100074

出版日期:2021-05-15 发布日期:2021-08-15
作者简介:刘银龙，博士生，研究领域为空天用轻质高效紧凑式换热器。E-mail：lyl1613@buaa.edu.cn
基金资助:
国家自然科学基金（51906009）；国家科技重大专项（2017-III-0005-0029）。

Design and Experimental Study of Spiral Tube Air-Air Heat Exchanger

1.College of Energy and Power Engineering，Beihang University，Beijing 100191，China;2.China Academy of Aerospace Aerodynamics，Beijing 100074，China

Online:2021-05-15 Published:2021-08-15

摘要/Abstract

摘要： 为解决飞行器高马赫数飞行时，用于冷却航空发动机涡轮叶片和其它高温部件的压气机出口空气温度过高的问题，设计加工了一种以外涵空气为冷源的螺旋管式空气-空气换热器用于预冷冷却空气。换热器由48根材料为不锈钢321，外径4mm，壁厚0.5mm的螺旋管组成，重量1.91kg，传热面积密度106m²/m³。在常温工况下，实验研究了换热器管内和管外流体的阻力特性，高温条件下试验验证了换热器设计点性能，压气机出口空气温降达188K，功重比4.9kW/kg。高温条件下实验研究了两侧空气流量分别单独变化时换热器的热动力性能，拟合了管外换热经验关系式。研究结果可用于未来相似结构换热器的设计。

关键词: 螺旋管;换热器;航空发动机;热防护

Abstract: To solve the problem that the temperature is too high of the compressor bleeding air used to cool the turbine blades and other high temperature components of the aircraft engine when flying at high Mach number， a spiral tube air-air heat exchanger with bypass air as a coolant was designed to pre-cool the cooling air. The heat exchanger consists of 48 pieces of stainless steel 321 spiral tubes with the outer diameter of 4mm and wall thickness of 0.5mm. The weight is 1.91kg and the heat transfer area density is 106m²/m³. The flow resistance characteristics of the fluid inside and outside the heat exchanger tube were studied experimentally under room temperature conditions. The design point performance of the heat exchanger was verified by the test under high temperature conditions. The temperature drop of the compressor exit air reached 188K and the power-to-weight ratio was 4.9kW/kg. Under the high temperature condition， the thermodynamic performance of the heat exchanger was studied experimentally when the air flow on both sides was changed separately， and the empirical correlation for heat transfer coefficient on tube outside was fitted. The research results will be helpful for the design of similar structure heat exchangers.

Key words: Spiral tube;Heat exchanger;Aero-engine;Thermal protection

刘银龙，付衍琛，闻洁，亓绍帅. 螺旋管式空气-空气换热器的设计和实验研究[J]. 推进技术, 2021, 42(5): 1087-1093.

LIU Yin-long¹, FU Yan-chen¹, WEN Jie¹, QI Shao-shuai². Design and Experimental Study of Spiral Tube Air-Air Heat Exchanger[J]. Journal of Propulsion Technology, 2021, 42(5): 1087-1093.

参考文献

[1] Bruening G B， Chang W S. Cooled Cooling Air Systems for Turbine Thermal Management［R］. ASME 99-GT-014.
[2] Woschnak A， Oschwald M. Thermo-and Fluid Mechanical Analysis of High Aspect Ratio Cooling Channels［R］. AIAA 2001-3404.
[3] Edwards T， Zabarnick S. Supercritical Fuel Deposition Mechanisms［J］. Industrial & Engineering Chemistry Research， 1993， 32（12）： 3117-3122.
[4] Chepkin V. New Generation of Russian Aircraft Engines Conversion and Future Goals［R］. ISABE 99-7042.
[5] Li H， Huang H， Xu G， et al. Performance Analysis of a Novel Compact Air-Air Heat Exchanger for Aircraft Gas Turbine Engine Using LMTD Method［J］. Applied Thermal Engineering， 2017， 116： 445-455.
[6] Liu Y L， Fu Y， Huang H， et al. A Novel Air-Air Heat Exchanger Design and Experimental Validation for Aero-Engines［C］. Pittsburgh： ASME 2018 International Mechanical Engineering Congress and Exposition， 2018.
[7] ?ukauskas A. Heat Transfer from Tubes in Crossflow［J］. Advances in Heat Transfer， 1972， 8： 93-160.
[8] Grimson E D. Correlation and Utilization of New Data on Flow Resistance and Heat Transfer Cross-Flow of Gases over Tube Banks［J］. Trans. ASME， 1937， 59： 583-594.
[9] Prabhanjan D G， Raghavan G S V， Rennie T J. Comparison of Heat Transfer Rates Between a Straight Tube Heat Exchanger and a Helically Coiled Heat Exchanger［J］. International Communications in Heat and Mass Transfer， 2002， 29（2）： 185-191.
[10] Shokouhmand H， Salimpour M R， Akhavan-Behabadi M A. Experimental Investigation of Shell and Coiled Tube Heat Exchangers Using Wilson Plots［J］. International Communications in Heat and Mass Transfer， 2008， 35（1）： 84-92.
[11] Salimpour M R. Heat Transfer Characteristics of a Temperature-Dependent-Property Fluid in Shell and Coiled Tube Heat Exchangers［J］. International Communications in Heat and Mass Transfer， 2008， 35（9）： 1190-1195.
[12] Salimpour M R. Heat Transfer Coefficients of Shell and Coiled Tube Heat Exchangers［J］. Experimental Thermal and Fluid Science， 2009， 33（2）： 203-207.
[13] Moawed M. Experimental Study of Forced Convection from Helical Coiled Tubes with Different Parameters［J］. Energy Conversion and Management， 2011， 52（2）： 1150-1156.
[14] Wen J， Fu Y， Bao X， et al. Flow Resistance and Convective Heat Transfer Performances of Airflow Through Helical-Tube Bundles［J］. International Journal of Heat and Mass Transfer， 2019， 130： 778-786.
[15] Wen J， Huang H， Li H， et al. Thermal and Hydraulic Performance of a Compact Plate Finned Tube Air-Fuel Heat Exchanger for Aero-Engine［J］. Applied Thermal Engineering， 2017， 126： 920-928.
[16] Kay J M， Nedderman R M， Nedderman R M. Fluid Mechanics and Transfer Processes［J］. International Journal of Heat and Fluid Flow， 1986， 7（2）.
[17] Dittus F W， Boelter L M K. Heat Transfer in Automobile Radiators of the Tubular Type［J］. International Communications in Heat and Mass Transfer， 1985， 12（1）： 3-22.
[18] 史美中，王中铮. 热交换器原理与设计［M］. 南京：东南大学出版社， 2014.

螺旋管式空气-空气换热器的设计和实验研究

Design and Experimental Study of Spiral Tube Air-Air Heat Exchanger

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价