基于被动控制的D型钝体减阻大涡模拟研究

doi:10.13675/j.cnki.tjjs.190405

推进技术 ›› 2020, Vol. 41 ›› Issue (8): 1692-1700.DOI: 10.13675/j.cnki.tjjs.190405

基于被动控制的D型钝体减阻大涡模拟研究

吴文昌，韩省思，毛军逵

南京航空航天大学能源与动力学院，江苏南京 210016

发布日期:2021-08-15
作者简介:吴文昌，硕士生，研究领域为发动机流动传热的数值模拟。E-mail：15151822262@163.com
基金资助:
国家自然科学基金（51606095；91841302）；江苏省自然科学基金（BK20160794）。

Large Eddy Simulation of Flow Around a D-Shaped Bluff Body for Drag Reduction Based on Passive Control

College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China

Published:2021-08-15

摘要/Abstract

摘要： 钝体减阻在航空航天等多个领域内具有重要的应用潜力，也是重要的基础研究热点问题。为了精确捕捉流动控制的流动细节，并发展效果优良的流动控制减阻方案，论文围绕抽象出的D型钝体，采用大涡模拟方法，开展了被动控制减阻高精度数值模拟研究。首先基于前期研究成果，对D型钝体尾迹区剪切层附近放置一个光滑小圆柱的被动减阻方法开展了数值模拟，发现总阻力减小17.7%，与试验结果吻合很好，同时数值预测的速度场分布也与试验结果吻合良好。在此基础上，进一步提出了采用齿槽型表面结构的小圆柱对D型钝体尾迹区进行扰动，并开展了数值验证，发现总阻力减小21.4%，优于前期的减阻方法。最后研究了在三种雷诺数工况下两种小圆柱扰动情况下的减阻效果，均表现出良好的减阻效果，两种小圆柱扰动下总阻力最大降幅分别为19.6%和23.1%，同时基于大涡模拟计算结果对减阻流动机理进行了探讨。上述研究结果表明，通过进一步优化流场结构，可以得到更优的流动减阻方案。

关键词: 大涡模拟;钝体绕流;流动控制减阻;流动分离;雷诺数

Abstract: The drag reduction for bluff body flow has high potential for application in aeronautical engineering, and it is also a hot research topic for fundamental study. In order to explore the fine flow structures and develop efficient passive flow control method for drag reduction, using high fidelity large eddy simulation, the present study numerically conducts passive flow control of drag reduction for a simplified D-shaped cylinder. Firstly, based on previous research, a small smooth circular cylinder is placed near the shear layer in the wake region of the D-shaped cylinder, and its effect on the drag reduction is numerically studied. It is found that the total drag can be reduced by 17.7%, which agrees with the experimental data very well. The predicted velocity flow fields are found to agree with the experimental results well too. Furthermore, the present study proposes a new flow control approach, i.e. to apply the grooved-surface circular cylinder to replace the previous smooth one to disturb the wake flow after the D-shaped cylinder. The numerical study is performed and it is found that the total drag can be reduced by 21.4%. The larger drag reduction confirms that the proposed flow control method can work well. At last, the Reynolds number effect is studied and three cases with different Reynolds number are carried out. The drag reduction methods with two different small cylinder disturbances work quite well at different Reynolds numbers, and the maximum drag reductions by the two small cylinder disturbances are 19.6% and 23.1%, respectively. Based on the numerical results from the large eddy simulation, the relevant flow mechanism of the drag reduction is also explored. The obtained results demonstrate that by controlling the flow fields properly, a better drag reduction method can be obtained.

Key words: Large eddy simulation;Turbulent flow around bluff body;Flow control for drag reduction;Flow separation;Reynolds number

吴文昌，韩省思，毛军逵. 基于被动控制的D型钝体减阻大涡模拟研究[J]. 推进技术, 2020, 41(8): 1692-1700.

WU Wen-chang, HAN Xing-si, MAO Jun-kui. Large Eddy Simulation of Flow Around a D-Shaped Bluff Body for Drag Reduction Based on Passive Control[J]. Journal of Propulsion Technology, 2020, 41(8): 1692-1700.

参考文献

[1] Achenbach E. Distribution of Local Pressure and Skin Friction Around a Circular Cylinder in Cross-Flow up to Re=5×10⁶[J]. Journal of Fluid Mechanics, 1968， 34(4): 625-639.
[2] Zdravkovich M M. Review and Classification of Various Aerodynamic and Hydrodynamic Means for Suppressing Vortex Shedding[J]. Journal of Wind Engineering and Industrial Aerodynamic， 1981， 7(2)： 145-189.
[3] Zhou B， Wang X， Guo W， et al. Experimental Study on Flow Past a Circular Cylinder with Rough Surface[J]. Ocean Engineering， 2015， 109(15): 7-13.
[4] 王伟，宋保维，毛昭勇，等. 脊状结构表面圆柱绕流的流体特性研究[J]. 华中科技大学学报（自然科学版）， 2018， 46(9)： 108-111.
[5] Jie H， Liu Y. Large Eddy Simulation of Turbulent Flow over a Cactus-Analogue Grooved Cylinder[J]. Journal of Visualization， 2016， 19(1): 61-78.
[6] Liu Y， Liu Shi L， Xu J. TR-PIV Measurement of the Wake Behind a Grooved Cylinder at Low Reynolds Number[J]. Journal of Fluids and Structures， 2011， 27(3):394-407.
[7] Mittal S， Raghuvanshi A. Control of Vortex Shedding Behind Circular Cylinder for Flows at Low Reynolds Numbers[J]. International Journal for Numerical Methods in Fluids， 2001， 35(4): 421-447.
[8] Mittal S. Control of Flow Past Bluff Bodies Using Rotating Control Cylinders[J]. Journal of Fluids and Structures， 2001， 15(2): 291-326.
[9] Dalton C， Xu Y， Owen J C. The Suppression of Lift on a Circular Cylinder Due to Vortex Shedding at Moderate Reynolds Numbers[J]. Journal of Fluids and Structures， 2001， 15(3-4): 617-628.
[10] 谭玲燕. 数值模拟放置附属圆柱的主圆柱绕流[J]. 吉林大学学报(理学版)， 2012， 50(1): 69-72.
[11] Thiria B， Cadot O， Beaudoin J F. Passive Drag Control of a Blunt Trailing Edge Cylinder[J]. Journal of Fluids and Structures， 2009， 25(5): 766-776.
[12] Bosch G， Rodi W. Simulation of Vortex Shedding Past a Square Cylinder with Different Turbulence Models[J]. International Journal for Numerical Methods in Fluids， 1998， 28(4): 601-616.
[13] You Y， Yan Z， Zhong Y， et al. Large Eddy Simulation of the Flow Past a Circular Cylinder[C]. Shenzhen: 2nd International Conference on Civil， Transportation and Environmental Engineering， 2017.
[14] Zhang K， Katsuchi H， Zhou D， et al. Numerical Study on the Effect of Shape Modification to the Flow Around Circular Cylinders[J]. Journal of Wind Engineering and Industrial Aerodynamic， 2016， 152: 23-40.
[15] Karabelas S J. Large Eddy Simulation of High-Reynolds Number Flow Past a Rotating Cylinder[J]. International Journal of Heat and Fluid Flow， 2010， 31(4): 518-527.
[16] Nicoud F， Ducros F. Subgrid-Scale Stress Modeling Based on the Square of the Velocity Gradient Tensor[J]. Flow， Turbulence and Combustion， 1999， 62(3): 183-200.
[17] Lysenko D A， Ertesv?g I S， Rian K E. Large-Eddy Simulation of the Flow over a Circular Cylinder at Reynolds Number 3900 Using the OpenFOAM Toolbox[J]. Flow Turbulence and Combustion， 2012， 89(4): 491-518.
[18] Roshko A. Perspectives on Bluff Body Aerodynamics [J]. Journal of Wind Engineering and Industrial Aerodynamics， 1993， 49(1): 79-100.
[19] Hunt J C R， Wray A A， Eddies Moin P.， Streams and Convergence Zones in Turbulent Flows[R]. Center for Turbulence Research， Report CTR-S88， 1988.
[20] 于定勇，赵建豪，黄东燕，等. 不同倒角半径柱体绕流数值模拟及水动力特性分析[J]. 海洋工程， 2018， 36(5): 1-11.

基于被动控制的D型钝体减阻大涡模拟研究

Large Eddy Simulation of Flow Around a D-Shaped Bluff Body for Drag Reduction Based on Passive Control

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价