Journal of Propulsion Technology ›› 2000, Vol. 21 ›› Issue (6): 21-24.

Previous Articles     Next Articles

Gear method for calculation of one dimensional chemical reaction nozzle flow

  

  1. Inst of Aerospace and Material Engineering,National Univ of Defence Technology,Changsha 410073,China;Inst of Aerospace and Material Engineering,National Univ of Defence Technology,Changsha 410073,China;Inst of Aerospace and Material Engineering,National Univ of Defence Technology,Changsha 410073,China;Inst of Aerospace and Material Engineering,National Univ of Defence Technology,Changsha 410073,China;Inst of Aerospace and Material Engineering,National Univ of Defence Technology,Changsha 410073,China
  • Published:2021-08-15

一维喷管化学反应流的吉尔方法研究

郭健,陈广南,张为华,方丁酉,焦绍球   

  1. 国防科技大学航天与材料工程学院!湖南长沙410073;国防科技大学航天与材料工程学院!湖南长沙410073;国防科技大学航天与材料工程学院!湖南长沙410073;国防科技大学航天与材料工程学院!湖南长沙410073;国防科技大学航天与材料工程学院!湖南长沙410073
  • 基金资助:
    国家重点实验室基金资助项目

PDF

Abstract: The one-dimensional chemical reaction nozzle flow was calculated numerically using a new mathematical method called Gear method The stiff control equations were solved properly Other difficult problems such as the initial value and the throat condition determination were solved

Key words: Hydrogen oxygen engine;Nozzle flow;Chemical reaction flow;Gear method;Numerical calculation

摘要： 建立了一维喷管化学反应流计算模型 ,并进行了数值求解 ,给出了喷管内一维化学反应流计算结果。采用吉尔方法解决控制方程组的刚性问题获得满意效果。计算中解决了化学反应流计算中初值难于给定和喉部条件难于确定等问题。并通过对氢氧发动机喷管的分析计算 ,证明了这种方法的正确性。

关键词: 氢氧发动机;喷管气流;化学反应流;吉尔方法;数值计算

Founded in 1980
Competent department: China Aerospace Science and Industry Group Co., Ltd
Sponsor: China Aerospace Science and industry group No.31 Research Institute
ISSN: 1001-4055
Journal of Propulsion Technology © 2021
E-mail: tjjs@sina.com
www.tjjscasic.com
Support: 010-62662699
Access Statistics

General Visit:

Visit Today:

Currently Online: