[1] ZHANG Hui, YANG Ji-ping, WANG Jun-ping. Technologies on High Speed Drilling Deep Holes of Cast-Aluminium Thin-Wall Piece[J]. Journal of Propulsion Technology, 2001, 22(6): 526-528. (张辉, 杨继平, 王君平. 铸铝薄壁件高速钻深孔技术研究[J]. 推进技术, 2001, 22(6): 526-528.)
[2] WANG Zhong-jin, WANG Zhong-ren, WANG Junping, et al. Viscous Pressure Forming of Super-Alloy Super-Thin Wall Corrugated Parts Applied to Rmjet Engine[J]. Journal of Propulsion Technology, 2002, 23(1): 84-88. (王忠金, 王仲仁, 王君平, 等. 冲压发动机超薄壁波纹形件的粘性介质压力成形[J]. 推进技术, 2002, 23(1): 84-88.)
[3] Kaya N. Machining Fixture Locating and Clamping Position Optimization Using Genetic Algorithms [J]. Computers in Industry, 2006, 57: 112-120.
[4] Padmanaban K P, Arulshri K P, Prabhakaran G. Machining Fixture Layout Design Using Ant Colony Algorithm Based Continuous Optimization Method[J]. International Journal of Advanced Manufacturing Technology, 2009, 45: 922-934.
[5] Meshram R C, Patil C R, Shirbhate A D. Optimization of Machining Fixture: Validation of Clamping Force on Side Frame of Ginning Machine[J]. Mechanical Engineering Division, 2011, 92: 48-52.
[6] Rodrigo A, Placid M. Optimal Placement of Fixture Clamps Minimizing the Maximum Clamping Forces[J]. Transactions of the ASME, 2002, 1264: 686-694.
[7] 秦国华, 王子琨, 吴竹溪, 等. 基于神经网络与遗传算法的薄壁件多重装夹布局优化[J]. 机械工程学报, 2015, 51(1): 203-212.
[8] 王运巧, 梅中义, 范玉青. 壁弧形件装夹布局有限元优化[J]. 机械工程学报, 2005, 41(6): 214-217.
[9] 董辉跃, 柯映林. 铣削加工中薄壁件工装布局方案优选的有限元模拟[J]. 浙江大学学报, 2004, 38(1):17-21.
[10] CAI W, HU S J, YUAN J X. Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations[J]. Transactions of the ASME, 1996, 118: 318-324.
[11] 王刚, 钟志水, 黄永青. 基于蚁群遗传算法的网格资源调度研究[J]. 计算机仿真, 2009, 04: 240-243.
[12] 霍军周, 李广强, 滕弘飞, 等. 人机结合蚁群/遗传算法及其在卫星舱布局设计中的应用[J]. 机械工程学报, 2005, 41(3):112-136.
[13] HE Yun-qin, LIANG Guo-zhu. System Parameter Optimization of Solid Propellant Rocket Motors Based on Ant Colony Algorithm[J]. Journal of Propulsion Technology, 2010, 31(1): 5-11. (何允钦, 梁国柱. 基于蚁群算法的固体火箭发动机总体参数优化[J]. 推进技术, 2010, 31(1): 5-11.)
[14] CHEN W F, NI L J, XUE J B. Deformation Control Through Fixture Layout Design and Clamping Force Optimization[J]. International Journal of Advanced Manufacturing Technology, 2008, 38(9-10): 860-867.
[15] Tim J T E, Ganod G C. Specifying Semantic Web Service Compositions Using UML and OCL[C]. Salt Lake City: Proceedings of the 16th International Conference on Web Services, 2007: 521-528. * 收稿日期:2015-12-24；修订日期:2016-02-28。基金项目:国防基础科研基金(A0420132503)。作者简介:周涛,男,博士生,研究领域为系统工程技术。E-mail: zhouhtkg@163.com(编辑:刘萝威)
|
