Two-Scale Analysis for Mechanical Properties of 3D Four-Directional Braided Composites with Pore Defects

Journal of Propulsion Technology ›› 2018, Vol. 39 ›› Issue (8): 1873-1879.

• Material,Propellant and Fuel • Previous Articles Next Articles

Two-Scale Analysis for Mechanical Properties of 3D Four-Directional Braided Composites with Pore Defects

School of Energy and Power Engineering，Beihang University，Beijing 100191，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China;Collaborative Innovation Center for Advanced Aero-Engine，Beijing 100191，China;Beijing Key Laboratory of Structural Strength of Aero-Engine，Beijing 100191，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China,School of Energy and Power Engineering，Beihang University，Beijing 100191，China and School of Energy and Power Engineering，Beihang University，Beijing 100191，China;Collaborative Innovation Center for Advanced Aero-Engine，Beijing 100191，China;Beijing Key Laboratory of Structural Strength of Aero-Engine，Beijing 100191，China

Published:2021-08-15

含孔隙三维四向编织复合材料力学性能的双尺度分析

齐泽文¹,胡殿印^1,2,3,张龙¹,曾雨琪¹,王荣桥^1,2,3

北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191; 先进航空发动机协同创新中心，北京 100191; 航空发动机结构强度北京市重点实验室，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191,北京航空航天大学能源与动力工程学院，北京 100191; 先进航空发动机协同创新中心，北京 100191; 航空发动机结构强度北京市重点实验室，北京 100191

作者简介:齐泽文，男，硕士，研究领域为发动机结构强度、疲劳寿命及可靠性。E-mail: buaa_qizewen@126.com 通讯作者:胡殿印，女，博士，教授/博导，研究领域为发动机结构强度、疲劳寿命及可靠性。
基金资助:
国家自然科学基金(51675024；51305012；51375031)；国防基础科研计划资助(B2120132006)。

Abstract

Abstract: In order to predict the mechanical properties of 3D four-directional braided composites with pore defects more accurately， this essay studied the effects of dry patches in fiber bundles and voids in matrix on the macroscopic mechanical properties of the three-dimensional four-direction braided composites based on the two-scale analysis method. Firstly， generalized method of cells was used to predict equivalent mechanical properties of the fiber bundles at micro-scale. Then， the macroscopic equivalent elastic constants were predicted by representative volume element (RVE) and meso-mechanical finite element method in braided structure on mesoscale scale. The predicted results were in good agreement with the available experimental data， demonstrating the applicability of the two-scale method. Finally， pore elements was distributed by Monte-Carlo technique simulating dry patches elements in fiber bundles and voids elements in matrix in 3D four-directional braided composites RVE model to discuss the influence of two kinds of defects on the mechanical properties of 3D four-directional braided composites. The results show that the defects have great influence on the mechanical properties of 3D four-directional braided composites. Dry patches in fiber bundles have more significant effect on the elastic properties than voids in matrix. In the case of given porosity (P_mv=P_fv=4%)， the elastic modulus of the weaving direction only increased from 13.6GPa to 14.2GPa demonstrating that the positional distribution of defects has little effect on the modulus of elasticity in the braiding direction.

Key words: 3D four-directional braided composites；Pore defects；Two-scale；Material property prediction

摘要： 为了更精确地对含孔隙三维四向编织复合材料的力学性能进行预测，基于双尺度分析方法分别研究了纤维束中的干斑和基体中的孔穴对三维四向编织复合材料宏观力学性能的影响。在纤维束微观尺度上，采用通用单胞法来预测纤维束等效力学性能参数。在编织结构细观尺度上，利用代表性体积单元(RVE)和细观力学有限元法预测得到宏观等效弹性常数。将上述计算结果与文献实验数据进行对比，验证了双尺度分析方法的正确性。采用Monte-Carlo仿真技术在模型中投入气孔单元，分别在纤维束和基体中模拟干斑和孔穴，讨论了两种孔隙缺陷对三维四向编织复合材料力学性能的影响规律。结果表明:孔隙缺陷率对三维四向编织复合材料力学性能有较大的影响，且纤维束中的干斑较基体中的孔穴相比影响更大；在给定孔隙缺陷率(P_mv=P_fv=4%)情况下，沿编织方向弹性模量仅从13.6GPa变化到14.2GPa，说明孔隙的位置分布对沿编织方向的弹性模量影响很小。

关键词: 三维四向编织复合材料；孔隙缺陷；双尺度；材料性能预测

QI Ze-wen¹,HU Dian-yin^1,2,3,ZHANG Long¹,ZENG Yu-qi¹,WANG Rong-qiao^1,2,3. Two-Scale Analysis for Mechanical Properties of 3D Four-Directional Braided Composites with Pore Defects[J]. Journal of Propulsion Technology, 2018, 39(8): 1873-1879.

齐泽文,胡殿印,张龙,曾雨琪,王荣桥. 含孔隙三维四向编织复合材料力学性能的双尺度分析[J]. 推进技术, 2018, 39(8): 1873-1879.

References

[1] Bilisik K. Three-Dimensional Braiding for Composites: A Review[J]. Textile Research Journal, 2013, 83(13):1414-1436.
[2] Miravete A. 3-D Textile Reinforcements in Composite Materials[M]. UK: Woodhead Publishing, 1999.
[3] Kalidindi S R, Abusafieh A. Longitudinal and Transverse Moduli and Strengths of Low Angle 3-D Braided Composites[J]. Journal of Composite Materials, 1996, 30(8): 885-905.
[4] Wang R, Zhang L, Hu D, et al. A Novel Approach to Impose Periodic Boundary Condition on Braided Composite RVE Model Based on RPIM[J]. Composite Structures, 2017, 163: 77-88.
[5] Chen L, Tao X M, Choy C L. RETRACTED: On the Microstructure of Three-Dimensional Braided Preforms[J].Composites Science & Technology, 1999, 59(3):391-404.
[6] 巩龙东, 申秀丽. 细观周期性结构复合材料热固耦合双尺度渐进均匀化分析方法及有限单元法实现[J]. 推进技术, 2016, 37(1): 18-24. (GONG Long-dong, SHEN Xiu-li. Thermal-Elastic Two-Scale Asymptotic Analysis Method for Micro Periodic Composites and Implementation Utilizing Finite Element Method[J]. Journal of Propulsion Technology, 2016, 37(1): 18-24.)
[7] Hassani B, Hinton E. Homogenization Theory for Media with Periodic Structure[J]. Homogenization & Structural Topology Optimization, 1998, 69(6): 707-717.
[8] Lions J L. Some Methods in the Mathematical Analysis of Systems and Their Control[M]. New York: Gordon and Breach, 1981.
[9] 吴世平, 唐绍锋, 梁军, 等. 周期性复合材料热力耦合性能的多尺度方法[J]. 哈尔滨工业大学学报, 2006, 38(12): 2049-2053.
[10] 郑晓霞, 郑锡涛, 缑林虎. 多尺度方法在复合材料力学分析中的研究进展[J]. 力学进展, 2010, 40(1):41-56.
[11] Hamidi Y K, Altan M C, Aktas L. Formation of Microscopic Voids in Resin Transfer Molded Composites[J]. Journal of Engineering Materials & Technology, 2003, 126(4): 555-569.
[12] 戴福洪, 杜善义. 复合材料RTM制造工艺数值模拟研究进展[J]. 宇航材料工艺, 2002, 32(6):14-18.
[13] 任明法, 常鑫. 基于两尺度代表体元的含孔隙复合材料单层板弹性常数预测[J]. 复合材料学报, 2016, 33(5): 1111-1118.
[14] Shen X, Gong L. RVE Model with Porosity for 2D Woven CVI SiCf /SiC Composites[J]. Journal of Materials Engineering & Performance, 2016, 25(12): 5138-5144.
[15] 石多奇, 牛宏伟, 景鑫, 等. 考虑孔隙的三维编织陶瓷基复合材料弹性常数预测方法[J]. 航空动力学报, 2014, 29(12): 2891-2897.
[16] Ismar H, Schr?ter F, Streicher F. Modeling and Numerical Simulation of the Mechanical Behavior of Woven SiC/SiC Regarding a Three-Dimensional Unit Cell[J]. Computational Materials Science, 2000, 19(1-4): 320-328.
[17] Aboudi J. Micromechanical Analysis of Thermo-Inelastic Multiphase Short-Fiber Composites[J]. Composites Engineering, 1995, 5(7): 839-850.
[18] Pindera M J, Bednarcyk B A. An Efficient Implementation of the Generalized Method of Cells for Unidirectional, Multi-Phased Composites with Complex Microstructures [J]. Composites Part B: Engineering, 1999, 30(1):87-105.
[19] 修英姝. 四步法三维编织复合材料力学性能的有限元分析[D]. 天津:天津工业大学, 2001.
[20] 郑锡涛. 三维编织复合材料细观结构与力学性能分析[D]. 西安:西北工业大学, 2003.
[21] Wang R, Zhang L, Hu D, et al. Evaluation of Three Unit Cell Models in Predicting the Mechanical Behavior of 3D Four-Directional Braided Composites[J]. Journal of Composite Materials, 2017, 51(27).
[22] Wang R, Zhang L, Hu D, et al. Progressive Damage Simulation in 3D Four-Directional Braided Composites Considering the Jamming-Action-Induced Yarn Deformation[J]. Composite Structures, 2017, 178: 330-340.
[23] 袁义云. 含孔隙陶瓷基复合材料基体的力学性能和失效问题研究[D]. 南京:南京航空航天大学, 2008.(编辑:朱立影)　　　　　　　　　　　　　*　收稿日期:2017-08-13；修订日期:2017-10-25。基金项目:国家自然科学基金(51675024；51305012；51375031)；国防基础科研计划资助(B2120132006)。作者简介:齐泽文,男,硕士,研究领域为发动机结构强度、疲劳寿命及可靠性。E-mail: buaa_qizewen@126.com通讯作者:胡殿印,女,博士,教授/博导,研究领域为发动机结构强度、疲劳寿命及可靠性。E-mail: hdy@buaa.edu.cn

Two-Scale Analysis for Mechanical Properties of 3D Four-Directional Braided Composites with Pore Defects

含孔隙三维四向编织复合材料力学性能的双尺度分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments