WANG Lei, LIU Kai-li, CHEN Yong, SI Jiang-tao, ZHOU Shi-rui, SHAO Qing-ling. Wind Tunnel Test and Numerical Study on Civil Aircraft Inlet Performance under Low Speed and High Angle of Attack Condition[J]. Journal of Propulsion Technology, 2021, 42(6): 1235-1244.
[1] Farokhi S. Aircraft Propulsion[M]. UK: John Wiley & Sons, 2014.
[2] Hurez A. Recent Progress on Powerplant/Airframe Integration at Aerospatiale Matra Airbus[C]. UK: 22nd Congress of ICAS, 2000.
[3] Andrew T, Lehnig T, Rahm S. Inlet/Fan Cowl Design for Increased Angle-of-Attack Requirements of Transport Aircraft-Methodology and Test Results[R]. AIAA 91-2481.
[4] Sóbester A. Tradeoffs in Jet Inlet Design: A Historical Perspective[J]. Journal of Aircraft, 2007, 44(3): 705-717.
[5] Longley J P, Greitzer E M. Inlet Distortion Effects in Aircraft Propulsion System Integration[R]. AGARD-LS-183, 1992.
[6] Felderman E J, Albers J A. Comparison of Experimental and Theoretical Boundary-Layer Separation for Inlets at Incidence Angle at Low-Speed Conditions[R]. NASA-TM-X-3194, 1975.
[7] Younghans J, Hoelmer W, Stockman N. Low Speed Effects of Reynolds Number and Lip Geometry on High Bypassratio Inlet Performance[R]. AIAA 82-0059.
[8] Coschignano A, Babinsky H. Influence of Near-Leading Edge Curvature on the Performance of Aero-Engine Intake Lips at High-Incidence[R]. AIAA 2016-3559.
[9] Miller B A. Inlets for High Angles of Attack[J]. Journal of Aircraft, 1976, 13(4): 319-320.
[10] Coschignano A, Babinsky H, Sheaf C, et al. Normal-Shock/Boundary-Layer Interactions in Transonic Intakes at High Incidence[J]. AIAA Journal, 2019, 57(7): 2867-2880.
[11] Hall C A, Hynes T P. Measurements of Intake Separation Hysteresis in a Model Fan and Nacelle Rig[J]. Journal of Propulsion and Power, 2006, 22(4): 872-879.
[12] Hodder B K. An Investigation of Engine Influence on Inlet Performance[R]. NASA-CR-166136, 1981.
[13] Radespiel R, Francois D, Hoppmann D, et al. Simulation of Wing and Nacelle Stall[R]. AIAA 2016-1830.
[14] Coles C, Babinsky H. The Impact of Roughness Size on the Shock-Wave Boundary-Layer Interaction on Aero-Engine Intakes at Incidence[R]. AIAA 2019-0296.
[15] Erbsloeh S, Crowther W, Frutos J. Control of Compressor Face Total Pressure Distortion on a High Bypass Turbofan Intake Using Air-Jet Vortex Generators[R]. AIAA 2004-2206.
[16] Wakelam C T, Hynes T P, Hodson H P, et al. Separation Control for Aeroengine Intakes, Part 1: Low-Speed Investigation of Control Strategies[J]. Journal of Propulsion and Power, 2012, 28(4): 758-765.
[17] Maji? F, Efraimsson G, O'Reilly C J. Potential Improvement of Aerodynamic Performance by Morphing the Nacelle Inlet[J]. Aerospace Science and Technology, 2016, 54: 122-131.
[18] Schuehle A L. The 727 Airplane Side Inlet Low-Speed Performance Confirmation Model Test for Refanned JT8D Engines[R]. NASA-CR-134609, 1974.
[19] Schulze S, K?hler C J. Analysis of the Flow in Stalling Engine Inlet Models with Different Visualization and Measurement Techniques[C]. Germany: Second Symposium Simulation of Wing and Nacelle Stall, 2010.
[20] Probst A, Schulze S, Radespiel R, et al. Numerical Simulation of Engine-Inlet Stall with Advanced Physical Modelling Compared to Validation Experiments[C]. Germany: 17th STAB/DGLR Symposium, 2013.
[21] Ubelacker S, Hain R, K?hler C J. Flow Investigations in a Stalling Nacelle Inlet under Disturbed Inflow[C]. Germany: Symposium on Field of the Research Unit 1066, 2014.
[22] Larkin M J, Schweiger P S. Ultra High Bypass Nacelle Aerodynamics Inlet Flow-Through High Angle of Attack Distortion Test[R]. NASA-CR-189149, 1992.
[23] Colin Y, Aupoix B, Boussuge J F, et al. Numerical Simulation of the Distortion Generated by Crosswind Inlet Flows[R]. ISABE-2007-1210.
[24] Kennedy S, Robinson T, Spence S, et al. Computational Investigation of Inlet Distortion at High Angles of Attack[J]. Journal of Aircraft, 2014, 51(2): 361-376.
[25] Kalsi H S, Tucker P G. Numerical Modelling of Shock Wave Boundary Layer Interactions in Aero-Engine Intakes at Incidence[C]. Norway: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, 2018.
[26] Carnevale M, Green J S, di Mare L. On Lip Stall Suppression in Powered Intake: High and Low Fidelity Approach[C]. Sweden: The 14th International Symposiwm on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, 2015.
[27] Kennedy S, Robinson T, Spence S, et al. The Effect of Lipskin Damage on Inlet Distortion[R]. AIAA 2010-747.
[28] 姬昌睿, 刘凯礼, 张鹏飞, 等. 外物损伤对民用飞机短舱内/外流气动特性的影响[J]. 航空学报, 2015, 36(3): 772-781.
[29] 刘凯礼, 姬昌睿, 谭兆光, 等. 大涵道比涡扇发动机 TPS 短舱低速气动特性分析[J]. 推进技术, 2015, 36(2): 186-193.