HAN Zhao-peng, HAN Ya-wei, LIU Ya-bing, WEI Bao-xi, GANG Qiang. Method to Measure Wall Heat Flux of Liquid Rocket Thrust Chambers Based on L-M Algorithm[J]. Journal of Propulsion Technology, 2021, 42(7): 1643-1651.
[1] Kim J G, Lee K J, Seo S, et al. Film Cooling Effects on Wall Heat Flux of a Liquid Propellant Combustion Chamber[R]. AIAA 2006-5196.
[2] Suslov D, Woschnak A, Greuel D, et al. Measurement Techniques for Investigation of Heat Transfer Processes at European Research and Technology Test Facility P8[J]. Journal of Physics Condensed Matter, 2005, 17(41): 6405-6413.
[3] Suslov D I, Arnold R, Haidn O. Investigation of Two Dimensional Thermal Loads in the Region Near the Injector Head of a High Pressure Subscale Combustion Chamber[R]. AIAA 2009-450.
[4] Suslov D I, Arnold R, Haidn O. Investigation of Film Cooling Efficiency in a High Pressure Subscale LOX/H2 Combustion Chamber[R]. AIAA 2011-5778.
[5] Locke J M, Pal S, Woodward R D, et al. Chamber Wall Heat Flux Measurements for a LOX/CH4 Uni-Element Rocket[R]. AIAA 2007-5547.
[6] Conley A, Vaidyanathan A, Segal C. Heat Flux Measurements for a GO2/GH2 Single-Element, Shear Injector[J]. Journal of Spacecraft and Rockets, 2007, 44(3): 633-639.
[7] 孙 冰, 刘 迪, 王太平. 液体火箭发动机燃烧室壁面热流测量方法研究[J]. 推进技术, 2017, 38(9): 2122-2129.
[8] 孙 冰, 王太平, 刘 迪, 等. 热容燃烧室基于单点温度的热流测量方法研究[J]. 推进技术, 2018, 39(4): 881-887.
[9] Wang Taiping, Sun Bing, Xiang Jixin, et al. Wall Heat Flux Measurements in a GO2/GH2 Heat-Sink Combustion Chamber[J]. Journal of Thermal Science and Technology, 2018, 1(13): 1-17.
[10] 王太平. 液体火箭发动机头部气膜冷却仿真与试验研究[D]. 北京: 北京航空航天大学, 2019.
[11] Beck J V, Blackwell B, Clair C R. Inverse Heat Conduction: Ill-Posed Problems[M]. New York: John Wiley & Sons, 1985.
[12] Tikhonov A N, Goncharsky A V, Stepanov V V, et al. Numerical Methods for the Solution of Ill-Posed Problems[M]. Dordrecht: Springer, 1995.
[13] Khachfe R A, Jarny Y. Numerical Solution of 2D Nolinear Inverse Heat Conduct Ion Problems Using Finite Element Techniques[J]. Numerical Heat Transfer, Part B, 2000, 37(1): 45-67.
[14] 杨海天, 胡国俊. 共轭梯度法求解多宗量稳态传热反问题[J]. 应用基础与工程科学学报, 2002, 10(2): 174-180.
[15] Cabeza J M G, Garcia J A M, Rodriguez A C, et al. A Sequential Algorithm of Inverse Heat Conduction Problems Using Singular Value Decomposition[J]. International Journal of Thermal Sciences, 2005, 44(3): 235-244.
[16] Su J, Lopez A B, Silva Neto A J. Estimation of Unknown Wall Heat Flux in Turbulent Circular Pipe Flow[J]. International Communications in Heat and Mass Transfer, 2000, 27(7): 945-954.
[17] Taler J. Determination of Local Heat Transfer Coefficient from the Solution of Heat Conduction Problem[J]. Forschung im Ingenieurwesen, 2007, 71(2): 69-78.
[18] Liu F B. A Hybrid Method for the Inverse Heat Transfer of Estimating Fluid Thermal Conductivity and Heat Capacity[J]. International Journal of Thermal Sciences, 2011, 50(5): 718-724.
[19] Mejias M M, Orlande H R B. A Comparison of Different Parameter Estimation Techniques for the Identification of the Thermal Conductivity Components of Orthotropic Solids[C]. Washington: Third International Conference on Inverse Problems in Engineering: Theory and Practice, 1999.
[20] Singh S K, Yadav M K, Sonawane R, et al. Estimation of Time-Dependent Wall Heat Flux from Single Thermocouple Data[J]. International Journal of Thermal Sciences, 2017, 115: 1-15.
[21] Fguiri A, Daouas N, Borjini N, et al. Experimental Inverse Analysis for the Determination of Boundary Conditions in the Parallel Hot Wire Technique[J]. Experimental Thermal and Fluid Science, 2007, 31(3): 209-220.
[22] 韩兆鹏, 郭 晟, 刘亚冰, 等. 组合动力用过氧化氢煤油推力室热防护方案设计方法[J]. 推进技术, 2021, DOI: 10.13675/j.cnki.tjjs.200004.
[23] 刘国球. 液体火箭发动机原理[M]. 北京: 宇航出版社, 1993.
[24] 陶文铨. 数值传热学[M]. 西安: 西安交通大学出版社, 2013.
[25] Kreyszig E. Advanced Engineering Mathematics[M]. Manhattan: John Wiley & Sons Inc, 2006.
[26] Ozisik M N, Oriande H R. Inverse Heat Transfer: Fundamentals and Application[M]. New York: Taylor & Francis, 2000.
[27] 中国航空材料手册 第4卷[M]. 北京: 中国标准出版社, 2002.
[28] Jones G, Protz C, Bullard B. Local Heat Flux Measurements with Single Element Coaxial Injectors[R]. AIAA 2006-5194.