陶瓷基复合材料螺栓渐进损伤计算与强度预测

doi:10.13675/j.cnki.tjjs.180747

推进技术 ›› 2020, Vol. 41 ›› Issue (2): 406-411.DOI: 10.13675/j.cnki.tjjs.180747

陶瓷基复合材料螺栓渐进损伤计算与强度预测

朱宝城^1,2,高希光^1,2,宋迎东^1,2,3

1.南京航空航天大学能源与动力学院，航空发动机热环境与热结构工业和信息化部重点实验室，江苏南京 210016;2.南京航空航天大学能源与动力学院，江苏省航空动力系统重点实验室，江苏南京 210016;3.南京航空航天大学机械结构力学及控制国家重点实验室，江苏南京 210016

发布日期:2021-08-15
作者简介:朱宝城，硕士生，研究领域为陶瓷基复合材料。E-mail： 296595421@qq.com
基金资助:
国家重点研发计划（2017YFB0703200）；国家自然科学基金（51575261；51675266）。

Progressive Damage Calculation and Strength Prediction of Ceramic Matrix Composites Bolt

1.Key Laboratory of Aero-Engine Thermal Environment and Structure，Ministry of Industry and Information Technology，College of Energy and Power Engineering，Nanjing University of Aeronautics and Astronautics， Nanjing 210016， China;2.Jiangsu Province Key Laboratory of Aerospace Power System，College of Energy and Power Engineering， Nanjing University of Aeronautics and Astronautics， Nanjing 210016， China;3.State Key Laboratory of Mechanics and Control Mechanical Structures，Nanjing University of Aeronautics and Astronautics， Nanjing 210016， China

Published:2021-08-15

摘要/Abstract

摘要： 为了准确预测陶瓷基复合材料螺栓的强度及损伤演化过程，建立了陶瓷基复合材料螺栓有限元模型，并采用渐进损伤模型实现了陶瓷基复合材料螺栓的失效分析，形成通用有效的陶瓷基复合材料结构渐进损伤有限元仿真方法。计算结果表明：陶瓷基复合材料螺栓在载荷1129N时萌生损伤。加载到失效载荷（1459N）时，损伤沿着螺纹槽扩展至整个螺纹槽。最后，损伤从螺纹槽扩展至螺杆中心导致螺杆断裂失效。螺栓的破坏位置在螺纹接触最上面的螺纹槽处，螺栓断裂的主要原因是材料的 Z向拉伸破坏。

关键词: 陶瓷基复合材料;渐进损伤;失效载荷;损伤演化;失效模式

Abstract: In order to accurately predict the strength and damage evolution process of ceramic matrix composite(CMCs)bolt， a finite element model of ceramic matrix composite bolt was established. Based on the progressive damage model, the failure analysis of ceramic matrix composite bolt was realized.A general and effective finite element simulation method for progressive damage of CMCs structure was developed. The results show that the damage of CMCs bolt originated under 1129N. When loaded to the failure load (1459N), the damage extended along the thread groove to the entire groove. Finally, the damage extended from the thread groove to the center of the screw leading to the failure of the screw.The failure position of bolt was at the thread groove of the top of the thread contact. The main reason of the bolt fracture was the Z-direction tensile failure.

Key words: Ceramic matrix composites;Progressive damage;Failure load;Damage evolution;Failure mode

朱宝城,高希光,宋迎东. 陶瓷基复合材料螺栓渐进损伤计算与强度预测 [J]. 推进技术, 2020, 41(2): 406-411.

ZHU Bao-cheng^1,2,GAO Xi-guang^1,2,SONG Ying-dong^1,2,3. Progressive Damage Calculation and Strength Prediction of Ceramic Matrix Composites Bolt[J]. Journal of Propulsion Technology, 2020, 41(2): 406-411.

参考文献

[1] Dogigli M , Handrick K ， Bickel M ， et al . CMC Key Technologies-Background， Status， Present and Future Applications[C]. Palermo: 4th European Workshop on Hot Structures and Thermal Protection Systems for Space Vehicles， 2002.
[2] BoHrk H ， Dittert C ， Weihs H ， et al . Sharp Leading Edge at Hypersonic Flight: Modeling and Flight Measurement[J]. Journal of Spacecraft and Rockets， 2014， 51( 5): 1753- 1760.
[3] Wulz H ， Stark H ， Trabandt U . Joining and Load Transfer Technology for Hot CMC Structures[C]. Friedrichshafen: 34th AIAA Thermophysics Conference， 2006.
[4] Henriksen Anders F . The Nuts and Bolts of Ceramic Fasteners[J]. Journal of Machine Design， 2006， 78( 11): 72- 74.
[5] Zhidong Guan， Junwu Mu， Fei Su ， et al . Pull-Through Mechanical Behavior of Composite Fastener Threads[J]. Applied Composite Materials， 2015， 22( 3): 251- 267.
[6] Mei H ， Cheng L F ， Ke Q Q ， et al . High-Temperature Tensile Properties and Oxidation Behavior of Carbon Fiber Reinforced Silicon Carbide Bolts in A Simulated Re-entry Environment[J]. Carbon， 2010， 48( 11): 3007- 3013.
[7] Verrilli M ， Brewer D . Characterization of Ceramic Matrix Composite Fasteners Exposed in a Combustor Linear Rig Test[C]. Amsterdam: American Society of Mechanical Engineers， 2002.
[8] B?hrk H ， Beyermann U . Secure Tightening of a CMC Fastener for the Heat Shield of Re-Entry Vehicles[J]. Composite Structures， 2010， 92( 1): 107- 112.
[9] 卢子兴，廖强，杨振宇，等 . C/SiC复合材料螺栓螺牙承载能力[J]. 复合材料学报， 2015， 32( 1): 182- 187.
[10] Junwu Mu， Zhidong Guan， Tianya Bian， et al . The Experiment and Numerical Simulation of Composite Countersunk-Head Fasteners Pull-Through Mechanical Behavior[J]. Applied Composite Materials， 2014， 21( 5): 773- 787.
[11] Li G D ， Li Y ， Yu G Q ， et al . Effects of Fiber Preform Structures on the Mechanical Properties of C/SiC Nuts and Bolts[J]. Ceramics International， 2016， 42( 11): 12901- 12906.
[12] Li G D ， Zhang C R ， Hu H F ， et al . Optimization Study of C/SiC Threaded Joints[J]. International Journal of Applied Ceramic Technology， 2014， 11( 2): 289- 293.
[13] Whale E . Ceramic Fasteners for High Temperature Applications[J]. Material Technology， 2000， 15( 4): 276- 281.
[14] 李俊，矫桂琼，王刚，等 . 室温下C/SiC复合材料螺纹紧固件的拧紧特性[J]. 复合材料学报， 2012， 29( 5): 164- 170.
[15] Chang F K ， Chang K Y . A Progressive Damage Model for Laminated Composites Containing Stress Concentrations[J]. Journal of Composite Materials， 1987， 21( 9): 834- 855.
[16] Turon A ， Costa J ， Maimí P ， et al . A Progressive Damage Model for Unidirectional Fibre-Reinforced Composites Based on Fibre Fragmentation， Part I: Formulation[J]. Composites Science & Technology， 2005， 65( 13): 2039- 2048.
[17] Chishti Maajid ， Chun Hui Wang， Thomson Rodney S ， et al . Progressive Damage in Single Lap Countersunk Composite Joints[C]. Sydney: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics， 2010.
[18] 赵丽滨，徐吉峰 . 先进复合材料连接结构分析方法[M]. 北京：北京航空航天大学出版社， 2015.
[19] 薛建刚，高希光，方光武，等 . 针刺陶瓷基复合材料损伤本构模型及构件应力分析[J]. 航空动力学报， 2016， 31( 10): 2370- 2375.
[20] Tsai S W ， Wu E M . A General Theory of Strength for Anisotropic Materials[J]. Journal of Composite Materials， 1971， 5( 1): 58- 80.
[21] Hashin Z . Failure Criteria for Unidirectional Fiber Composites[J]. Journal of Applied Mechanics， 1980， 47( 2): 329- 334.
[22] Tserpes K I ， Papanikos P ， Kermanidis T . A Three-Dimensional Progressive Damage Model for Bolted Joints in Composite Laminates Subjected to Tensile Loading[J]. Fatigue & Fracture of Engineering Materials & Structures， 2010， 24( 10): 663- 675.
[23] McCarthy C T ， O’Higgins R M ， Frizzell R M . A Cubic Spline Implementation of Non-Linear Shear Behaviour in Three-Dimensional Progressive Damage Models for Composite Laminates[J]. Composite Structures， 2010， 92( 1): 173- 181.
[24] Gao X G ， Yu G Q ， Xue J G ， et al . Failure Analysis of C/SiC Composites Plate with a Hole by the PFA and DIC Method[J]. Ceramics International， 2017， 43( 6): 5255- 5266.
[25] Tang Y L ， Zhou Z G ， Pan S D ， et al . Mechanical Property and Failure Mechanism of 3D Carbon-Carbon Braided Composites Bolted Joints under Unidirectional Tensile Loading[J]. Materials and Design， 2015， 65: 243- 253.

陶瓷基复合材料螺栓渐进损伤计算与强度预测

Progressive Damage Calculation and Strength Prediction of Ceramic Matrix Composites Bolt

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价