基于OpenFOAM的真实流体模型库及均相求解器开发

doi:10.13675/j.cnki.tjjs.190186

推进技术 ›› 2020, Vol. 41 ›› Issue (8): 1773-1784.DOI: 10.13675/j.cnki.tjjs.190186

基于OpenFOAM的真实流体模型库及均相求解器开发

李鹏飞¹，雷凡培²，周立新¹

1.西安航天动力研究所液体火箭发动机技术重点实验室，陕西西安 710100;2.中国船舶工业集团有限公司，北京 100044

发布日期:2021-08-15

Development of Real-Fluid Model Libraries and Homogeneous Solver Based on OpenFOAM

1.Science and Technology Laboratory on Liquid Rocket Engine,Xi’an Aerospace Propulsion Institute,Xi’an 710100,China;2.China State Shipbuilding Corporation Limited,Beijing 100044,China

Published:2021-08-15

摘要/Abstract

摘要： 为了正确认识高压环境下的流体非理想性特征，及其对于低温射流喷雾过程的影响作用，将多种不同真实流体模型写入到开源CFD程序OpenFOAM仿真平台中，编译形成具有广泛通用性的真实流体热物理模型库；并将高压下真实流体特征的影响引入到压力修正算法中；开发出适用于描述超临界环境下低温流体流动过程的均相求解器。对高压下流体热物理性质的非理想性，以及超临界环境下的低温液氮射流喷注过程进行研究。结果表明：高压下的真实流体效应主要体现在低温区域，本文所建立的模型库可以在任意热力学状态范围内正确预测流体热物性；基于此模型库所开发的均相求解器可正确预测超临界环境下低温射流的详细流动特征和结构，而理想气体模型则会大幅低估射流核心区密度分布，中心线上误差高达68.9%；综合考虑计算精度和效率，PR EoS及相关模型更适合于这类超临界流动问题的求解；低温射流跨临界喷注中局部区域所发生的虚假沸腾现象会导致射流温升速率降低、体积膨胀速率加快；射流核心区压缩因子明显<1，在数值仿真时必须考虑高压环境下的真实流体效应。

关键词: 真实流体;热物理性质;超临界环境;低温射流;流动特性;均相求解器

Abstract: In order to understand the non-ideality of fluid under high-pressure conditions and their effects on spray process of cryogenic jet, several different real-fluid models were implemented into open source CFD toolbox OpenFOAM, which was then compiled to form generalized real-fluid thermo-physical model libraries. In addition, the effects of non-linearity of these models were introduced to pressure-corrector algorithm. Thus, a homogeneous solver which was appropriate to characterize flow of cryogenic fluid at supercritical condition was developed. Non-ideality of thermo-physical properties under high-pressure conditions and injection of cryogenic liquid nitrogen jet under supercritical condition were investigated. The results indicated that the effects of real-fluid characteristics are primarily exhibited in the high-pressure, low-temperature regions, and the model libraries developed in this study could correctly predict thermo-physical properties under any thermodynamic conditions. The newly developed solver based on these libraries could correctly reveal the flow characteristic and structures of cryogenic jet under supercritical condition, whereas the ideal gas model would largely underestimate the density in core region of jet, the error on centerline is up to 68.9%. The PR EoS together with the dependent models behave relatively superior to other model packages based on the comprehensive comparison of the computational accuracy and efficiency. The pseudo-boiling phenomenon in local region during trans-critical injection of cryogenic jet would result in decrease of temperature raising rate and increase of volume expansion rate, and the compressibility factor in core region of jet is remarkably less than 1, consequently, the real-fluid effects under high-pressure conditions must be considered during simulation.

Key words: Real-fluid;Thermo-physical properties;Supercritical conditions;Cryogenic jet;Flow characteristic;Homogeneous solver

李鹏飞，雷凡培，周立新. 基于OpenFOAM的真实流体模型库及均相求解器开发[J]. 推进技术, 2020, 41(8): 1773-1784.

LI Peng-fei¹, LEI Fan-pei², ZHOU Li-xin¹. Development of Real-Fluid Model Libraries and Homogeneous Solver Based on OpenFOAM[J]. Journal of Propulsion Technology, 2020, 41(8): 1773-1784.

参考文献

[1] Mayer W, Schik A， Shcaffler M， et al. Injection and Mixing Processes in High-Pressure Liquid Oxygen/Gaseous Hydrogen Rocket Combustors[J]. Journal of Propulsion and Power， 2000， 16(5): 823-828.
[2] Branam R， Mayer W. Characterization of Cryogenic Injection at Supercritical Pressure[J]. Journal of Propulsion and Power， 2003， 19(3): 342-355.
[3] Mayer W， Telaar J， Branam R， et al. Raman Measurements of Cryogenic Injection at Supercritical Pressure [J]. Heat and Mass Transfer， 2003， 39(8-9): 709-719.
[4] Oschwald M， Schik A， Klar M， et al. Investigation of Coaxial LN₂-GH₂ Injection at Supercritical Pressure by Spontaneous Raman Scattering [R]. AIAA 99-2887.
[5] Chehroudi B， Cohn B R， Talley D. Cryogenic Shear Layers Experiments and Phenomenological Modeling of the Initial Growth Rate under Subcritical and Supercritical Conditions [J]. International Journal of Heat and Fluid Flow， 2002， 23(5): 554-563.
[6] Chehroudi B， Talley D， Coy E. Visual Characteristics and Initial Growth Rates of Round Cryogenic Jets at Subcritical and Supercritical Pressures [J]. Physics of Fluids， 2002， 14(2): 850-861.
[7] Chehroudi B， Talley D. Interaction of Acoustic Waves with a Cryogenic Nitrogen Jet at Sub-and Supercritical Pressures[R]. AIAA 2002-0342.
[8] Davis D W， Chehroudi B. Measurements in an Acoustically-Driven Coaxial Jet under Supercritical Conditions[J]. Journal of Propulsion and Power， 2007， 23(2): 364-374.
[9] Zong N. Modeling and Simulation of Cryogenic Fluid Injection and Mixing Dynamics under Supercritical Conditions[D]. Park: The Pennsylvania State University， 2005.
[10] Zong N， Yang V. Near-Field Flow and Flame Dynamics of LOX/Methane Shear-Coaxial Injector under Supercritical Conditions[J]. Proceedings of the Combustion Institute， 2007， 21(2): 2309-2317.
[11] Terashima H， Kawai S， Yamanishi N. High-Resolution Numerical Method for Supercritical Flows with Large Density Variations[J]. AIAA Journal， 2011， 49(12): 2658-2672.
[12] Schmitt T， Selle L， Ruiz A， et al. Large-Eddy Simulation of Supercritical-Pressure Round Jets [J]. AIAA Journal， 2010， 48(9): 2133-2144.
[13] Park T S. LES and RANS Simulations of Cryogenic Liquid Nitrogen Jets[J]. The Journal of Supercritical Fluids， 2012， 72（12）: 232-247.
[14] Li L， Xie M， Wei W， et al. Numerical Investigation on Cryogenic Liquid Jet under Transcritical and Supercritical Conditions[J]. Cryogenics， 2018， 89: 16-28.
[15] Banut D. Thermodynamic Analysis and Numerical Modeling of Supercritical Injection[D]. Stuttgart: University of Stuttgart， 2015.
[16] Pons L， Darabiha N， Candel S， et al. Mass Transfer and Combustion in Transcritical Non-Premixed Counterflows [J]. Combustion Theory and Modelling， 2009， 13(1): 57-81.
[17] Kim T， Kim Y， Kim S-K. Real-Fluid Flamelet Modeling for Gaseous Hydrogen/Cryogenic Liquid Oxygen Jet Flames at Supercritical Pressure[J]. The Journal of Supercritical Fluids， 2011， 58(2): 254-262.
[18] Wang X J， Huo H F， Yang V. Effects of Flow Strain Rates on Counterflow Diffusion Flames at Subcritical and Supercritical Pressures: Oxygen/Methane Mixture[R]. AIAA 2014-0650.
[19] 王亚洲，华益新，孟华. 超临界压力下低温甲烷的湍流传热数值研究 [J]. 推进技术， 2010， 31(4)： 606-611.
[20] Pizzarelli M， Nasuti F， Onofri M ， et al. Heat Transfer Modeling for Supercritical Methane Flowing in Rocket Engine Cooling Channels[J]. Applied Thermal Engineering， 2015， 75(1): 600-607.
[21] Jarczyk M， Pfitzner M. Large Eddy Simulation of Supercritical Nitrogen Jets[R]. AIAA 2012-1270.
[22] Müller H， Pfitzner M. Matheis J， et al. Large-Eddy Simulation of Coaxial LN₂/GH₂ Injection at Trans- and Supercritical Conditions[R]. AIAA 2015-0843.
[23] Bellan J. Theory， Modeling and Analysis of Turbulent Supercritical Mixing[J]. Combustion Science and Technology， 2006， 178(1-3): 253-281.
[24] Selle L C， Okong’o N A， Bellan J， et al. Modelling of Subgrid-Scale Phenomena in Supercritical Transitional Mixing Layers: A Priori Study[J]. Journal of Fluid Mechanics， 2007， 593: 57-91.
[25] Li P F， Lei F P， Zhou L X， et al. Investigation of Real-Fluid Characteristics in High-Pressure Liquid Rocket Engines[C]. Guadalajara: 67th International Astronautical Congress， 2016.
[26] Poling B E， Prausnitz J M， O’Connell J P. The Properties of Gases and Liquids [M]. 赵红玲，王凤坤，陈圣坤，等，译. 北京:化学工业出版社， 2006.
[27] Cismondi M， Mollerup J. Development and Application of a Three-Parameter RK-PR Equation of State[J]. Fluid Phase Equilibria， 2005， 232(1-2): 74-89.
[28] Ely J F， Hanley H J. Prediction of Transport Properties. 1. Viscosity of Fluids and Mixtures[J]. Industrial and Engineering Chemistry Fundamentals， 1981， 20(4): 323-332.
[29] Chung T H， AjlanM ， Lee L L， et al. Generalized Multiparameter Correlation for Nonpolar and Polar Fluid Transport Properties[J]. Industrial and Chemical Engineering Research， 1988， 27(4): 671-679.
[30] Ely J F， Hanley H J. Prediction of Transport Properties. 2. Thermal Conductivity of Pure Fluids and Mixtures[J]. Industrial and Engineering Chemistry Fundamentals， 1983， 22(1): 90-97.
[31] Tellar J， Schneider G， Hussong J， et. al. Cryogenic Jet Injection: Description of Test Case RCM 1[C]. Lampoldshausen: Proceedings 2nd International Workshop on Rocket Combustion Modeling, 2001.

基于OpenFOAM的真实流体模型库及均相求解器开发

Development of Real-Fluid Model Libraries and Homogeneous Solver Based on OpenFOAM

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价