扫频式射流对涡轮叶栅间隙泄漏流动影响的数值研究

doi:10.13675/j.cnki.tjjs.190266

推进技术 ›› 2020, Vol. 41 ›› Issue (6): 1250-1257.DOI: 10.13675/j.cnki.tjjs.190266

扫频式射流对涡轮叶栅间隙泄漏流动影响的数值研究

孟庆鹤¹，李伟航¹，陈绍文¹，王松涛¹

哈尔滨工业大学能源科学与工程学院，黑龙江哈尔滨 150001

发布日期:2021-08-15
作者简介:孟庆鹤，博士生，研究领域为非定常射流控制压气机角区流动分离。E-mail：mengqinghe0909@126.com
基金资助:
国家自然科学基金（51776048；51436002）。

Numerical Study for Effects of Sweeping Jets on Tip Clearance Flow in a Turbine Cascade

School of Energy Science and Engineering,Harbin Institute of Technology,Harbin 150001,China

Published:2021-08-15

摘要/Abstract

摘要： 为控制涡轮叶栅中叶顶间隙泄漏流动和改善涡轮气动性能，将扫频式射流器(SJA)作为一种主动流动控制方法应用在涡轮叶栅的研究中。通过非定常数值计算，分析了SJA对涡轮叶栅叶顶间隙流动的作用过程以及作用机理，并且研究了不同工况下SJA对涡轮叶顶流场改善效果以及不同频率的SJA对叶顶流场的影响。结果表明：通过在涡轮叶栅上端壁增加单个SJA装置，可以有效地延迟上端壁的流动分离，其中最佳方案射流流量仅为进口总流量的0.35%，涡轮叶栅出口截面总压损失系数减少了11.48%。存在着最佳的频率284Hz，使SJA装置对流场的作用效果最佳，有效地改善了涡轮叶栅内的间隙流动。

关键词: 流动控制;间隙泄漏流;扫频式射流器;非定常流动;涡轮平面叶栅

Abstract: For the purpose of controlling blade tip clearance flow in turbine cascade and improving its aerodynamic performance, sweeping jet actuator (SJA) has been introduced as a positive flow control method in the research on turbine cascade. Through unsteady calculation of the model, the effects of SJA on the interaction process and mechanisms of turbine cascade tip clearance flow are analyzed, as well as the effects of SJA on the improvement of turbine tip clearance flow field under different operating condition and the effects of SJA frequency on turbine tip clearance flow field. The results show that flow separation could be effectively delayed with employing single SJA on casing. Among all cases, the optimal case could reduce the total pressure loss coefficient by 11.48% with injecting flow mass flow rate only 0.35% of the inlet mass flow rate. 284Hz is the optimal SJA frequency that could improve the flow field most and effectively improve tip clearance flow in turbine cascade.

Key words: Flow control;Tip leakage flow;Sweeping jet actuator;Unsteady flows;Linear turbine cascade

孟庆鹤，李伟航，陈绍文，王松涛. 扫频式射流对涡轮叶栅间隙泄漏流动影响的数值研究[J]. 推进技术, 2020, 41(6): 1250-1257.

MENG Qing-he¹, LI Wei-hang¹, CHEN Shao-wen¹, WANG Song-tao¹. Numerical Study for Effects of Sweeping Jets on Tip Clearance Flow in a Turbine Cascade[J]. Journal of Propulsion Technology, 2020, 41(6): 1250-1257.

参考文献

[1] Booth T C, Dodge P R, Hepworth H K. Rotor-Tip Leakage， Part I： Basic Methodology[J]. Journal of Engineering for Gas Turbines & Power, 1982, 104(1): 154-161.
[2] Bindon J P. The Measurement and Formation of Tip Clearance Loss[J]. Journal of Turbomachinery, 1989, 111(3): 257-263.
[3] Huang A. Loss Mechanisms in Turbine Tip Clearance Flows[D]. USA: Massachusetts Institute of Technology, 2011.
[4] Lee S E, Sang W L, Kwak H S. Tip Leakage Aerodynamics over Stepped Squealer Tips in a Turbine Cascade[J]. Experimental Thermal & Fluid Science, 2011, 35(1): 135-145.
[5] Zhou C. Effects of Endwall Motion on Thermal Performance of Cavity Tips with Different Squealer Width and Height[J]. International Journal of Heat and Mass Transfer, 2015, 91（12）: 1248-1258.
[6] Cheon J H, Lee S W. Tip Leakage Aerodynamics over the Cavity Squealer Tip Equipped with Full Coverage Winglets in a Turbine Cascade[J]. International Journal of Heat and Fluid Flow, 2015, 56（12）: 60-70.
[7] Ahn J, Mhetras S, Han J C. Film-Cooling Effectiveness on a Gas Turbine Blade Tip Using Pressure-Sensitive Paint[J]. Journal of Heat Transfer, 2005, 127(5): 521-530.
[8] Huang J, Corke T C, Thomas F O. Plasma Actuators for Separation Control of Low-Pressure Turbine Blades[J]. AIAA Journal, 2006, 44(1): 51-57.
[9] Ong J, Miller R J, Uchida S. The Effect of Coolant Injection on the Endwall Flow of a High Pressure Turbine[J]. Journal of Turbomachinery, 2012, 134(5).
[10] Bunker R S. A Review of Shaped Hole Turbine Film-Cooling Technology[J]. Journal of Heat Transfer, 2005, 127(4): 441-453.
[11] Behr T, Kalfas A I, Abhari R S. Control of Rotor Tip Leakage Through Cooling Injection from the Casing in a High-Work[J]. Journal of Turbomachinery, 2008, 130(3): 538-544.
[12] Rao N M, Camci C. Axial Turbine Tip Desensitization by Injection from a Tip Trench, Part 1: Effect of Injection Mass Flow Rate[R]. ASME GT 2004-53256
[13] Rao N M, Camci C. Axial Turbine Tip Desensitization by Injection from a Tip Trench, Part 2: Leakage Flow Sensitivity to Injection Location[R]. ASME GT 2004-53258.
[14] Seele R, Graff E, Lin J, et al. Performance Enhancement of a Vertical Tail Model with Sweeping Jet Actuators[R]. AIAA 2013-411.
[15] Seele R, Tewes P, Woszidlo R. Discrete Sweeping Jets as Tools for Improving the Performance of the V-22[J]. Journal of Aircraft, 2009, 46(6): 2098-2106.
[16] DeSalvo M, Whalen E, and Glezer A. High-Lift Enhancement Using Active Flow Control[R]. AIAA 2011-3355.
[17] Cerretelli C, Wuerz W, Gharaibah E. Unsteady Separation Control on Wind Turbine Blades Using Fluidic Oscillators[J]. AIAA Journal, 2010, 48(7): 1302-1311.
[18] Koklu M. Application of Sweeping Jet Actuators on the NASA Hump Model and Comparison with CFDVAL2004 Experiments[R]. AIAA 2017-3313.
[19] Maines B H, Ghee T A, Raghu S, et al. Comparison of Flow Control Actuators on a Diamond Wing Planform[R]. AIAA 2018-0325.
[20] Koklu M, Owens L R. Comparison of Sweeping Jet Actuators with Different Flow-Control Techniques for Flow-Separation Control[J]. AIAA Journal, 2017, 55(3): 848-860.
[21] Chen S W, Meng Q H, Li W H, et al. Experimental Study on Axially Non-Uniform Clearances in a Linear Turbine Cascade with a Cavity Squealer Tip[J]. Proceedings of the Institution of Mechanical Engineers， Part G, Journal of Aerospace Engineering， 2019, 233(5): 1465-1655.
[22] Meng Q H, Chen S W, Li W H, et al. Numerical Investigation of a Sweeping Jet Actuator for Active Flow Control in a Highly Loaded Compressor Cascade[R]. ASME GT 2018-76052.

扫频式射流对涡轮叶栅间隙泄漏流动影响的数值研究

Numerical Study for Effects of Sweeping Jets on Tip Clearance Flow in a Turbine Cascade

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价