涡产生器倾角对换热器内流动与换热特性的影响

doi:10.13675/j.cnki.tjjs.190315

推进技术 ›› 2020, Vol. 41 ›› Issue (4): 868-874.DOI: 10.13675/j.cnki.tjjs.190315

涡产生器倾角对换热器内流动与换热特性的影响

高辰¹，罗超¹，史维娜¹，宋克伟¹

兰州交通大学机电工程学院铁道车辆热工教育部重点实验室，甘肃兰州 730070

发布日期:2021-08-15
作者简介:高辰，硕士生，研究领域为强化传热技术。E-mail：651610487@qq.com
基金资助:
国家自然科学基金（51866007）；甘肃省自然科学基金（17JR5RA092）；甘肃省协同创新团队（2018C-13）。

Effects of Inclination Angle of Vortex Generator on Fluid Flow and Heat Transfer Characteristics of Heat Exchanger

Key Laboratory of Railway Vehicle Thermal Engineering of Ministry of Education,School of Mechanical Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China

Published:2021-08-15

摘要/Abstract

摘要： 为优化涡产生器强化传热的性能，通过改变三角翼式涡产生器的倾角，数值分析了倾角变化对板式换热器通道内流动与换热特性的影响，倾角变化范围为-30°~30°。获得了不同倾角下通道内的纵向涡、涡量分布，换热及阻力特性。结果表明涡产生器倾斜方向对流动与换热的影响不同，存在最佳的涡产生器倾角-10°，使得换热通道内涡产生器强化换热的性能最优；改变倾角可进一步提高涡产生器的强化传热性能，不同倾角对应努塞尔数和热性能评价因子间的最大差值分别达到8.9%和5.7%。

关键词: 换热器;涡产生器;倾角;对流传热

Abstract: To improve the heat transfer enhancement performance of vortex generator, the inclination angle of a delta winglet vortex generator is proposed. The effects of inclination angle in the range between -30° and 30° on the fluid flow and heat transfer characteristics are numerically studied in the flow channel of plate heat exchanger. The details of the longitudinal vortex, vorticity, heat transfer and pressure loss in the flow channel are obtained under different inclination directions and different inclination angles. The results showed that inclination direction has apparent effect on the characteristics of fluid flow and heat transfer. There is an optimum inclination angle with -10° for the best heat transfer performance. Heat transfer performance of vortex generator can be further improved by changing the inclination angle. The maximum differences in Nusselt number and thermal performance factor between different inclination angles are approximately 8.9% and 5.7%, respectively.

Key words: Heat exchanger;Vortex generator;Inclination angle;Convective heat transfer

高辰，罗超，史维娜，宋克伟. 涡产生器倾角对换热器内流动与换热特性的影响[J]. 推进技术, 2020, 41(4): 868-874.

GAO Chen¹, LUO Chao¹, SHI Wei-na¹, SONG Ke-wei¹. Effects of Inclination Angle of Vortex Generator on Fluid Flow and Heat Transfer Characteristics of Heat Exchanger[J]. Journal of Propulsion Technology, 2020, 41(4): 868-874.

参考文献

[1] Lu H Y, Lv D， Yu X， et al. Study of the Pressure Drop and Thermal Performance of an Air-Air Heat Exchanger for Aero-Engine Application[J]. Procedia Engineering， 2015， 99(6): 812-821.
[2] Bock S， Horn W， Sieber J. Active Core-A Key Technology for more Environmentally Friendly Aero Engines being Investigated under the NEWAC Program[C]. Anchorage: 26th International Congress of the Aeronautical Sciences， 2008.
[3] Boyle R J， Jones S M. Effects of Precooling Turbine Cooling Air on Engine Performance[R]. ASME 2009-GT-60120.
[4] 王冬兰，朱卫兵，平登科，等. 燃-滑油换热器壳侧换热特性研究[J]. 推进技术， 2016， 37(5): 900-906.
[5] 马晓驰. 国内外新型高效换热器[J]. 化工进展， 2001， 20(1): 49-51.
[6] Yakut K， Sahin B， Celik C， et al. Effects of Tapes with double-sided Delta Winglets on Heat and Vortex Characteristics[J]. Applied Energy， 2005， 80(4): 77-79.
[7] Ke Z Q， Chen C L， Li K J， et al. Vortex Dynamics and Heat Transfer of Longitudinal Vortex Generators in a Rectangular Channel[J]. International Journal of Heat and Mass Transfer， 2019， 132(20): 871-885.
[8] 田丽亭，雷勇刚，何雅玲. 纵向涡强化换热特性及机理分析[J]. 工程热物理学报， 2008， 29(12): 2128-2130.
[9] Torri K， Kwak K， Nishino K. Heat Transfer Enhancement Accompanying Pressure-Loss Reduction with Winglet-Type Vortex Generators for Fin Tube Heat Exchangers[J]. International Journal of Heat and Mass Transfer， 2002， 45(7): 3795-3810.
[10] Fiebig M. Embedded Vortices in Internal Flow: Heat Transfer and Pressure Loss Enhancement[J]. International Journal of Heat and Fluid Flow， 1998， 16(10): 376-388.
[11] Fiebig M. Wing Type Vortex Generators for Heat Transfer Enhancement[J]. Heat Transfer, 1986， 6(10): 2909-2913.
[12] Song K W， Xi Z P， Su M， et al. Effect of Geometric Size of Curved Delta Winglet Vortex Generators and Tube Pitch on Heat Transfer Characteristics of Fin-Tube Heat Exchanger[J]. Experimental Thermal and Fluid Science， 2017， 82(11): 8-18.
[13] Song K W， Tagawa T. The Optimal Arrangement of Vortex Generators for Best Heat Transfer Enhancement in Flat-Tube-Fin Heat Exchanger[J]. International Journal of Thermal Sciences， 2018， 132(13): 355-367.
[14] Song K W， Hu W L， Liu S， et al. Quantitative Relationship between Secondary Flow Intensity and Heat Transfer Intensity in Flat-Tube-and-Fin Air Heat Exchanger with Vortex Generators[J]. Applied Thermal Engineering， 2016， 103(25): 1064-1070.
[15] Song K W， Liu S， Wang L B. Interaction of Counter Rotating Longitudinal Vortices and the Effect on Fluid Flow and Heat Transfer[J]. International Journal of Heat and Mass Transfer， 2016， 93(12): 349-360.
[16] Wu J M， Tao W Q. Numerical Study on Laminar Convection Heat Transfer in a Rectangular Channel with Longitudinal Vortex Generator. Part A: Verification of Field Synergy Principle[J]. International Journal of Heat and Mass Transfer， 2008， 51(5): 1179-1191.
[17] 闵春华，齐承英，谢尚群，等. 新型矩形翼纵向涡发生器流动与换热实验研究[J]. 热能与动力工程， 2010， 25(1): 43-47.
[18] 宋克伟，刘松，王良璧. 扁管换热器内纵向涡强度与换热强度对应关系[J]. 化工学报， 2016， 5(5): 1858-1867.
[19] Caliskan S. Experimental Investigation of Heat Transfer in a Channel with New Winglet-Type Vortex Generators[J]. International Journal of Heat and Mass Transfer， 2014， 78(5): 604-614.
[20] Anupam S， Himadri C， Ashwin K I. Enhancement of Heat Transfer in a Fin Tube Heat Exchanger Using Rectangular Winglet Type Vortex Generators[J]. International Journal of Heat and Mass Transfer， 2016， 101(8): 667-681.
[21] Assadour K， Charbel H， Serge R. Effect of Rectangular Winglet Pair Roll Angle on the Heat Transfer Enhancement in Laminar Channel Flow[J]. International Journal of Thermal Sciences， 2017， 114(8): 1-14.
[22] Azita A， Mehrzad S. Optimization of Shape and Angle of Attack of Winglet Vortex Generator in a Rectangular Channel for Heat Transfer Enhancement[J]. Applied Thermal Engineering， 2015， 81(7): 376-387.
[23] Zhou G B， Feng Z Z. Experimental Investigations of Heat Transfer Enhancement by Plane and Curved Winglet Type Vortex Generators with Punched Holes[J]. International Journal of Thermal Sciences， 2014， 78(15): 26-35.

涡产生器倾角对换热器内流动与换热特性的影响

Effects of Inclination Angle of Vortex Generator on Fluid Flow and Heat Transfer Characteristics of Heat Exchanger

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价