基于传热反问题方法的N2O/C2H4预混推进剂燃烧室热流测量研究

doi:10.13675/j.cnki.tjjs.190402

推进技术 ›› 2020, Vol. 41 ›› Issue (5): 1082-1088.DOI: 10.13675/j.cnki.tjjs.190402

基于传热反问题方法的N₂O/C₂H₄预混推进剂燃烧室热流测量研究

唐亮¹，李平¹，张锋¹，胡洪波¹

西安航天动力研究所液体火箭发动机技术重点实验室，陕西西安 710100

发布日期:2021-08-15

Measurement of Heat Flux in a N₂O/C₂H₄ Premixed Propellant Combustion Chamber Based on Inverse Heat Transfer Method

Science and Technology on Liquid Rocket Engine Laboratory，Xi’an Aerospace Propulsion Institute，Xi’an 710100，China

Published:2021-08-15

摘要/Abstract

摘要： 测量液体火箭发动机的热载荷是获取燃烧室内部信息的重要方法。为了获取N₂O/C₂H₄预混推进剂燃烧室内壁的热载荷，建立了液体火箭发动机的热流计算的反问题方法，该方法基于对燃烧室壁面温度场的直接求解，通过对轴向多个位置测量温度的反演计算得到燃烧室内壁热流和温度。研究表明：应用文中建立的传热反问题方法能够较为准确地获得热流随时间及空间的分布；热电偶的位置对计算准确性有明显的影响，与理论深度偏差在0.2mm以内的随机深度偏差可导致超过4%热流反演误差；N₂O/C₂H₄预混推进剂燃烧室热流及温度沿轴向逐渐降低，表明燃烧室内的反应释热过程主要在燃烧室头部附近发生。

关键词: 液体火箭发动机;传热;传热反问题方法;热流;N₂O/C₂H₄预混推进剂

Abstract: Measuring the thermal load of a liquid rocket engine is an important way for obtaining information inside the combustion chamber. In order to obtain the thermal load on the inner wall of a N₂O/C₂H₄ premixed propellant combustion chamber, an inverse method for heat flux calculation of liquid rocket engine is established. The inverse method is based on the direct solution of the temperature field of the combustion chamber wall. Through the inversion calculation of the axial measurement temperature, the heat flux and temperature of the inner wall of the combustion chamber are obtained. The conclusions of the research are as followed. The heat transfer inverse problem method established in the paper can accurately obtain the distribution of heat flux with time and space. The position of the thermocouples has a significant impact on the accuracy of the calculation. A random depth deviation from a theoretical depth of less than 0.2 mm can result in more than 4% inverse heat flux error. The heat flux and temperature of the N₂O/C₂H₄ premixed propellant combustion chamber gradually decrease along the axial position, indicating that the heat release mainly take place close to the head of the chamber.

Key words: Liquid rocket engine;Heat transfer;Inverse heat transfer method;Heat flux;N₂O/C₂H₄ premixed propellant

唐亮，李平，张锋，胡洪波. 基于传热反问题方法的N₂O/C₂H₄预混推进剂燃烧室热流测量研究[J]. 推进技术, 2020, 41(5): 1082-1088.

TANG Liang¹, LI Ping¹, ZHANG Feng¹, HU Hong-bo¹. Measurement of Heat Flux in a N₂O/C₂H₄ Premixed Propellant Combustion Chamber Based on Inverse Heat Transfer Method[J]. Journal of Propulsion Technology, 2020, 41(5): 1082-1088.

参考文献

[1] Fr?hlich A, Popp M， Schmidt G， et al. Heat Transfer Characteristics of H₂/O₂ Combustion Chambers[R]. AIAA 93-1826.
[2] Kim J G， Lee K J， Seo S， et al. Film Cooling Effects on Wall Heat Flux of a Liquid Propellant Combustion Chamber[R]. AIAA 2006-5196.
[3] Negishi H， Kumakawa A， Yamanishi N， et al. Heat Transfer Simulations in Liquid Rocket Engine Subscale Thrust Chambers[R]. AIAA 2008-5241.
[4] Kirchberger C， Schlieben G， Haidn O J. Using Intra Cooling Channel Measurementsfor Film Cooling Investigationsin a GOX/Kerosene Rocket Combustion Chamber[R]. AIAA 2012-3910.
[5] Marshall W M， Pal S， Woodward R D， et al. Wall Heat Flux Data for a GO₂/GH₂ Single Element Combustor[R]. AIAA 2005-3572.
[6] Suslov D， Woschnak A， Greuel D， et al. Measurement Techiques for the Investigation of Heat Transfer Processes at the European Research and Technology Test Facility P8 [C]. Moscow: European Conference for Aerospace Sciences， 2005.
[7] Conley A， Vaidyanathan A， Segal C. Heat Fluxes Measurements in a GH₂/GO₂ Single-Element， Shear Injector[R]. AIAA 2006-5048.
[8] Coy E. An Efficient Method for Calculating Surface Temperature and Heat Flux Based on Embedded Temperature Sensors[R]. AIAA 2008-3952.
[9] 孙冰，刘迪，王太平. 液体火箭发动机燃烧室壁面热流测量方法研究[J]. 推进技术， 2017, 38(9):2122-2129.
[10] Huang C H， Tsai Y L. A Transient 3-D Inverse Problem in Imaging the Time-Dependent Local Heat Transfer Coefficients for Plate Fin[J]. Applied Thermal Engineering， 2005, 25: 2478-2495.
[11] Celano M P， Silvestri S， Pauw J， et al. Heat Flux Evaluation Methods for a Single Element Heat-Sink Chamber[C]. Munich: 6th European Conference for Aeronautics and Space Sciences， 2015.
[12] Perakis N， Werling L， Ciezki H， et al. Numerical Calculation of Heat Flux Profiles in a N₂O/C₂H₄Premixed Green Propellant Combustor Using an Inverse Heat Conduction Method[C]. Rome: Space Propulsion Conference， 2016.
[13] Suslov D I， Arnold R， Haidn O J. Investigation of Film Cooling Efficiency in a High Pressure Subscale LOX/H₂ Combustion Chamber[R]. AIAA 2011-5778.
[14] 汪小卫，金平，蔡国飙, 等. 单喷嘴燃烧室传热特性测量方法[J]. 推进技术， 2008， 29(6): 726-732.
[15] 刘占一，刘计武，汪广旭. 气氧甲烷单喷嘴燃烧室壁面热流的测量和数值模拟[J]. 推进技术， 2018， 39(5): 1033-1040.
[16] Mungas G， Vozoff M， Rishikof B. NOFBX^TM: A New Non-Toxic， "Green" Propulsion Technology with High Performance and Low Cost[C]. Naples: 63rd International Astronautical Congress， 2012.
[17] Werling L， Perakis N， Müller S， et al. Hot Firing of a N₂O/C₂H₄ Premixed Green Propellant: First Combustion Tests and Results[C]. Rome: Space Propulsion Conference， 2016.
[18] Werling L， Hochheimer B， Baral A， et al. Experimental and Numerical Analysis of the Heat Flux Occurring in a Nitrous Oxide/Ethene Green Propellant Combustion Demonstrator[C]. Orlando:51st AIAA/SAE/ASEE Joint Propulsion Conference， 2015.
[19] Marcos B， Boulet M， Ousegui A， et al. Comparison of Global and Sequential Methods for an Inverse Heat Transfer Problem[J]. Inverse Problems in Science and Engineering， 2011， 19(6): 793-814.
[20] 丁小恒. 高超声速飞行试验热流密度测量方法与装置研究[D]. 哈尔滨：哈尔滨工业大学， 2015.

基于传热反问题方法的N₂O/C₂H₄预混推进剂燃烧室热流测量研究

Measurement of Heat Flux in a N₂O/C₂H₄ Premixed Propellant Combustion Chamber Based on Inverse Heat Transfer Method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价