幂律型流体撞击射流破碎特性直接数值模拟

doi:10.13675/j.cnki.tjjs.190537

推进技术 ›› 2020, Vol. 41 ›› Issue (8): 1895-1902.DOI: 10.13675/j.cnki.tjjs.190537

幂律型流体撞击射流破碎特性直接数值模拟

郑浩铭，孙俊柠，朱呈祥，尤延铖

厦门大学航空航天学院，福建厦门 361005

发布日期:2021-08-15
作者简介:郑浩铭，硕士生，研究领域为气液两相流。E-mail：373318224@qq.com
基金资助:
国家自然科学基金（51606161；91441128；11602209）；中央高校基本科研业务费专项资金（20720170055）；航空科学基金（2018ZB68008）。

Direct Numerical Simulation of Breakup Characteristics of Power Law Fluid Impingement Jet

School of Aerospace Engineering，Xiamen University，Xiamen 361005,China

Published:2021-08-15

摘要/Abstract

摘要： 凝胶推进剂的双股射流撞击雾化广泛应用于液体火箭发动机的燃烧室中，其破碎特征及雾化效果直接影响燃烧效率。为探究雾化特性的发展规律，采用直接数值模拟DNS方法，对射流速度为100m/s的剪切稀化非牛顿液体正交撞击产生的雾化特征、液体表面积、表面波、涡特性以及非牛顿特性开展研究。结果表明，射流下形成的雾化流场迅速扩张形成液膜，液膜两侧边缘破碎成大量的液丝与液滴，核心部分产生撞击波后在气体力的作用下逐步发展为带有凸起和褶皱的不稳定表面波，其撞击波波长最大可达2.46倍射流直径。液体表面积不断增长，但无量纲表面积总体呈现先下降再上升的趋势。气体中的涡量分布则分为有序附着区和无序爆炸区两类，并且涡量主要集中分布于气相区域。此外，射流撞击时产生强剪切使该液体内部的粘性系数下降，最低仅为初始粘性系数的0.3倍。

关键词: 液体火箭发动机;凝胶推进剂;射流;雾化;燃烧效率;非牛顿液体

Abstract: Double jet impingement atomization of gel propellants is widely used in the combustion chamber of liquid rocket engines. The commonly used atomization method is impinging liquid jets. Its crushing characteristics and atomization effect directly affect the combustion efficiency. In order to explore the development law of atomization characteristics, direct numerical simulation is adopted to describe the atomization characteristics, liquid surface area, surface wave, vortex characteristics and non-Newtonian characteristics generated by orthogonal impact of shear dilute non-Newtonian liquid at the jet velocity of 100m/s. The results show that the atomized flow field formed at the jet velocity of 100m/s expands rapidly to form liquid sheet and the edge of liquid sheet on both sides breaks into a large number of ligaments and droplets. The maximum wavelength of the impact wave is 2.46 times of jet diameter.The core of sheet produces impact waves, which gradually develop into unstable surface waves with bulges and folds under the action of gas force and the liquid surface area increased continuously, but the dimensionless surface area generally showed a tendency of first decreasing and then increasing. Vorticity distribution in gas is divided into two types: orderly attached region and disordered explosion region, and vorticity is mainly distributed in gas phase region. In addition, when the jet impinges, the strong shear will reduce the viscosity coefficient inside the liquid, which is only 0.3 times of the initial viscosity coefficient.

Key words: Liquid propellant rocket engine;Gelled propellant;Jet;Atomization;Combustion efficiency;Non-Newtonian fluid

郑浩铭，孙俊柠，朱呈祥，尤延铖. 幂律型流体撞击射流破碎特性直接数值模拟[J]. 推进技术, 2020, 41(8): 1895-1902.

ZHENG Hao-ming, SUN Jun-ning, ZHU Cheng-xiang, YOU Yan-cheng. Direct Numerical Simulation of Breakup Characteristics of Power Law Fluid Impingement Jet[J]. Journal of Propulsion Technology, 2020, 41(8): 1895-1902.

参考文献

[1] Ciezki H K, Hürttlen Jürgen， Naumann K W， et al. Overview of the German Gel Propulsion Technology Program [R]. AIAA 2014-3794.
[2] Desjardins O， Fox R O， Villedieu P. A Quadrature-Based Moment Method for Dilute Fluid-Particle Flows[J]. Journal of Computational Physics， 2008， 227(4):2514-2539.
[3] Fuster D， Agbaglah G， Josserand C， et al. Numerical Simulation of Droplets， Bubbles and Waves: State of the Art[J]. Fluid Dynamics Research， 2009， 41(6).
[4] Dombrowski N， Johns W R. The Aerodynamic Instability and Disintegration of Viscous Liquid Sheets[J]. Chemical Engineering Science， 1963， 18(3): 203-214.
[5] Shinjo J， Umemura A. Simulation of Liquid Jet Primary Breakup: Dynamics of Ligament and Droplet Formation[J]. International Journal of Multiphase Flow， 2010， 36(7): 513-532.
[6] Taylor G. Formation of Thin Flat Sheets of Water[J]. Proceedings of the Royal Society A: Mathematical， Physical and Engineering Sciences， 1960， 259: 1-17.
[7] Ibrahim E A， Przekwas A J. Impinging Jets Atomization[J]. Physics of Fluids A Fluid Dynamics， 1992， 3(12):2981-2987.
[8] Ingebo， Robert D. Experimental and Theoretical Effects of Nitrogen Gas Flow Rate on Liquid-Jet Atomization[J]. Journal of Propulsion and Power， 1988， 4(5): 406-411.
[9] Mazallon J， Dai Z， Faeth G M. Aerodynamic Primary Breakup at the Surface of Nonturbulent Round Liquid Jets in Crossflow[R]. AIAA 1998-716.
[10] Ng C L， Sankarakrishnan R， Sallam K A. Bag Breakup of Nonturbulent Liquid Jets in Crossflow[J]， International Journal of Multiphase Flow， 2008， 34(3): 241-259.
[11] 徐高，顾阳晨，朱帜帆，等. 预剪切对凝胶汽油雾化特性影响的实验研究[J]. 火箭推进， 2018， 44(4): 47-53.
[12] 邓寒玉，封锋，武晓松，等. 射流偏心撞击对凝胶推进剂撞击雾化影响的实验研究. [J]兵工学报， 2016， 37(4): 612-620.
[13] 王雄辉，黄勇，王方，等. 横向气流中液体圆柱射流的破碎特性和表面波现象[J]. 航空动力学报， 2012， 27(9): 1979-1987.
[14] 白富强. 幂律流体圆柱射流破碎机理的研究[D]. 天津：天津大学， 2017.
[15] 张蒙正，马杰. 幂律型流体射流破碎建模和实验问题探讨[J]. 火箭推进， 2010， 36(4): 1-6.
[16] 强洪夫，刘开，陈福振. 基于SPH方法的剪切流驱动液滴在固体表面变形运动数值模拟研究[J]. 工程力学， 2013， 30(11): 286-292.
[17] Rider W J， Kothe D B. Reconstructing Volume Tracking[J]. Journal of Computational Physics， 1998， 141(2):112-152.
[18] Schlottke J， Weigand B. Direct Numerical Simulation of Evaporating Droplets[J]. Journal of Computational Physics， 2008， 227(10): 5215-5237.
[19] Batchelor G K. The Theory of Homogeneous Turbulence[M]. Cambridge： Cambridge University Press， 1953: 133-168.
[20] 朱呈祥，陈荣钱，尤延铖. 低韦伯数非牛顿射流撞击破碎直接数值模拟[J]. 航空学报， 2017， 38(8): 6-14.
[21] 伊吉明. 幂律流体液膜射流破碎机理的实验研究[D]. 天津：天津大学， 2014.
[22] Bremond N， Gutkowski W， Bremond N P， et al. Atomization of Undulating Liquid Sheets[J]. Journal of Fluid Mechanics， 2007， 585: 421-456.
[23] 朱呈祥，郑浩铭，尤延铖. 高压环境下剪切稀化非牛顿撞击射流直接数值模拟[J]. 航空学报， 2019， 40（6）.
[24] Von Kampen J， Alberio F， Ciezki H K. Spray and Combustion Characteristics of Aluminized Gelled Fuels with an Impinging Jet Injector[J]. Aerospaceence & Technology， 2007， 11(1): 77-83.

幂律型流体撞击射流破碎特性直接数值模拟

Direct Numerical Simulation of Breakup Characteristics of Power Law Fluid Impingement Jet

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价