推进技术 ›› 2020, Vol. 41 ›› Issue (4): 750-757.DOI: 10.13675/j.cnki.tjjs.190733

• 总体与系统 • 上一篇    下一篇

涡轮冲压组合发动机在超声速客机上的应用方案研究

徐思远1,2,朱之丽1,刘振德2,薛永广2   

  1. 1.北京航空航天大学 能源与动力工程学院,北京 100191;2.北京动力机械研究所 高超声速冲压发动机技术重点实验室,北京 100074
  • 发布日期:2021-08-15

Research on Application of TBCC on Supersonic Airliner

  1. 1.School of Energy and Power Engineering,Beihang University,Beijing 100191,China;2.Science and Technology on Scramjet Laboratory,Beijing Power Machinery Institute,Beijing 100074,China
  • Published:2021-08-15

摘要: 为研究涡轮冲压组合发动机(Turbine Based Combined Cycle,TBCC)在超声速客机上的配装可行性,以Ma4超声速客机典型飞行任务需求为牵引,采用飞/发一体化约束分析与任务分析方法,建立了Ma4客机/TBCC发动机的一体化设计模型,确定了满足宽范围机动性需求的起飞推重比和满足航程需求的飞机起飞重量,对比分析了起飞推重比、模态转换马赫数、爬升轨迹等因素对飞机任务特性的影响。研究结果表明,TBCC发动机可满足Ma4客机配装需求,满足Ma4客机典型任务剖面机动性需求的起飞推重比应在0.6以上,满足60人商载与4000km航程任务需求的飞机起飞总重在50t~60t量级。

关键词: TBCC发动机;一体化设计;超声速客机;任务特性;应用方案

Abstract: The integration design model of the Ma4 airliner and Turbine Based Combined Cycle (TBCC) engine was built based on the typical mission profile of Ma4 airliner to research the application scheme of TBCC on the Ma4 airliner, with constrain analysis and mission analysis method. The takeoff thrust-weight-ratio and plane weight required were analyzed, and the impact of thrust-weight-ratio, mode transition Mach number, and the climb trajectory on the airplane mission characters were researched. It can be concluded that the takeoff weight of Ma4 airliner with the capability of 60-passengers payload and 4000km range should be about 50t~60t, and the thrust-weight-ratio should be no less than 0.60.

Key words: TBCC engine;Integrated design;Supersonic airliner;Mission characteristic;Application scheme