涡轮转子凹槽叶尖泄漏流动气动热力特征

doi:10.13675/j.cnki.tjjs.200246

推进技术 ›› 2020, Vol. 41 ›› Issue (9): 1975-1987.DOI: 10.13675/j.cnki.tjjs.200246

涡轮转子凹槽叶尖泄漏流动气动热力特征

邹正平^1,2，姚李超¹，轩笠铭¹，邵飞^1,3，黄霖¹，贺晓娟¹

1.北京航空航天大学能源与动力工程学院，航空发动机气动热力国防重点实验室,北京 100191;2.北京航空航天大学航空发动机研究院,北京 102206;3.中国航空发动机研究院,北京 101304

出版日期:2020-09-15 发布日期:2020-09-15
基金资助:
国家自然科学基金（51676005）。

Aero-Thermodynamic Characteristics of Tip Leakage Flow in Turbine Rotor with Squealer Tip

1.National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, School of Energy & Power Engineering,Beihang University,Beijing 100191,China;2.Research Institute of Aero-Engine,Beihang University,Beijing 102206,China;3.AECC Aero Engine Academy of China，Beijing 101304，China

Online:2020-09-15 Published:2020-09-15

摘要/Abstract

摘要： 为探索总结凹槽叶尖泄漏流动气动热力特征，利用实验和数值模拟方法，对叶尖凹槽内部旋涡相互作用机理和叶顶流动换热与泄漏流能量再分布等问题进行研究，并对凹槽叶尖参数化设计方法进行探讨。结果表明：搭建的考虑多因素实验台和可视化泄漏流动测量方案可以精确地捕捉到叶顶区域的流动结构；刮削涡在凹槽中起到“气动篦齿”作用，其形态特征的变化直接影响凹槽叶尖对泄漏流动的控制效果；高温泄漏流流体对叶片表面的冲击是叶尖热负荷提高的主要原因；合理选择叶尖气动参数和凹槽的几何参数可以有效控制刮削涡形态，最终提升叶尖气动热力性能。

关键词: 涡轮;凹槽叶尖;泄漏流动;旋涡结构;流动换热;精细化组织

Abstract: In order to explore and summarize the aero-thermodynamic characteristics of the tip leakage flow of squealer tip, experimental and numerical simulation methods are used to investigate the interaction mechanism of vortices in the squealer tip cavity, the tip region heat transfer and the energy redistribution of the leakage flow. The parametric design method of the squealer tip is also discussed. The results show that the multi-functional experimental platform and the visual leakage flow measurement scheme can precisely capture the flow structure in the tip region. An aero-labyrinth liked sealing effect is formed by the scraping vortex. Its shape characteristics directly affect the leakage flow controlling of squealer tip. The heat load increased in the squealer tip is mainly caused by the leakage flow impingement on the blade surface. By reasonable working condition and squealer tip geometry for organizing scraping vortex characteristics, the squealer tip can improve the turbine aero-thermodynamic performance effectively.

Key words: Turbine;Squealer tip;Tip leakage flow;Vortex structure;Flow and heat transfer;Refine organization

邹正平，姚李超，轩笠铭，邵飞，黄霖，贺晓娟. 涡轮转子凹槽叶尖泄漏流动气动热力特征[J]. 推进技术, 2020, 41(9): 1975-1987.

ZOU Zheng-ping^1,2, YAO Li-chao¹, XUAN Li-ming¹, SHAO Fei^1,3, HUANG Lin¹, HE Xiao-juan¹. Aero-Thermodynamic Characteristics of Tip Leakage Flow in Turbine Rotor with Squealer Tip[J]. Journal of Propulsion Technology, 2020, 41(9): 1975-1987.

参考文献

[1] Zou Z, Wang S, Liu H, et al. Axial Turbine Aerodynamics for Aero-Engines[M]. Singapore： Springer, 2018.
[2] Denton J D. The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines[J]. Journal of Turbomachinery, 1993, 115(4): 621-656.
[3] Bunker R S. A Review of Turbine Blade Tip Heat Transfer[J]. Annals of the New York Academy of Sciences, 2001, 934(1): 64-79.
[4] Dunn M G. Convective Heat Transfer and Aerodynamics in Axial Flow Turbines[J]. Journal of Turbomachinery, 2001, 123(4): 637-686.
[5] Bindon J P. The Measurement and Formation of Tip Clearance Loss[J]. Journal of Turbomachinery, 1989, 111(3): 257-263.
[6] Yaras M I, Sjolander S A. Prediction of Tip Leakage Losses in Axial Turbine[R]. ASME 90-GT-154.
[7] Gao J, Zheng Q, Xu T, et al. Inlet Conditions Effect on Tip Leakage Vortex Breakdown in Unshrouded Axial Turbines[J]. Energy, 2015, 91: 255-263.
[8] Huang A. Loss Mechanisms in Turbine Tip Clearance[D]. Boston: Massachusetts Institute of Technology, 2011.
[9] 魏佐君, 段文华, 乔渭阳, 等. 涡轮转子叶尖泄漏涡涡核稳定性及控制[J]. 航空动力学报, 2018, 33(9): 100-110.
[10] Bunker R S. Axial Turbine Blade Tips: Function, Design, and Durability[J]. Journal of Propulsion and Power, 2006, 22(2): 271-285.
[11] Zhou C, Hodson H P, Tibbott I, et al. Effects of Winglet Geometry on the Aerodynamic Performance of Tip Leakage Flow in a Turbine Cascade[J]. Journal of Turbomachinery, 2013, 135(7).
[12] Prakash C, Lee C, Cherry D, et al. Analysis of Some Improved Blade Tip Concepts[R]. ASME GT 2005-68333.
[13] 魏佐君, 乔渭阳, 时培杰, 等. 机匣造型设计对涡轮叶尖泄漏流损失的影响[J]. 航空动力学报, 2015, 30(3): 714-725.
[14] 皮骏, 杜旭博, 孔庆国, 等. 端壁转动对凹槽叶尖流动换热性能的影响[J]. 推进技术, 2019, 40(5): 51-60.
[15] Heyes F J G, Hodson H P, Dailey G M. The Effect of Blade Tip Geometry on the Tip leakage Flow in Axial Turbine Cascades[J]. Journal of Turbomachinery, 1992, 114(3): 643-651.
[16] Coull J D, Aktins N R, Hodson H P. High Efficiency Cavity Winglets for High Pressure Turbines[R]. ASME GT 2014-25261.
[17] Virdi A S, Zhang Q, He L, et al. Aerothermal Performance of Shroudless Turbine Blade Tips with Relative Casing Movement Effects[J]. Journal of Propulsion and Power, 2015: 31(2): 527-536.
[18] Zou Z, Shao F, Li Y, et al. Dominant Flow Structure in the Squealer Tip Gap and Its Impact on Turbine Aerodynamic Performance[J]. Energy, 2017, 138: 167-184.
[19] Krishnababu S K, Newton P J, Dawes W N, et al. Aerothermal Investigations of Tip Leakage Flow in Axial Flow Turbines，Part I: Effect of Tip Geometry and Tip Clearance Gap[J]. Journal of Turbomachinery, 2009, 131(1).
[20] Kegalj M, Schmid G, Schiffer H P, et al. Experimental and Numerical Investigation of Tip Leakage Flow in a 1/2 Stage Turbine Rig Comparing Flat and Cavity-Squealer Tip Geometries[R]. ASME GT 2012-69568.
[21] Qi L, Zou Z, Liu H, et al. Upstream Wake-Secondary Flow Interactions in the Endwall Region of High-Loaded Turbines[J]. Computers & Flows, 2010, 39(9): 1575-1584.
[22] Li C, Ke T, Zhang J, et al. Experimental and Numerical Investigation of the Unsteady Tip Leakage Flow in Axial Compressor Cascade[J]. Journal of Thermal Science, 2013, 22(2): 103-110.
[23] Mischo B, Burdet A, Abhari R. Influence of Stator-Rotor Interaction on the Aerothermal Performance of Recess Blade Tips[J]. Journal of Turbomachinery, 2010, 133(1).
[24] Wei Z, Qiao W, Shi P, et al. Tip-leakage Flow Loss Reduction in a Two-Stage Turbine Using Axisymmetric-Casing Contouring[J]. Chinese Journal of Aeronautics, 2014, 27(5): 1111-1121.
[25] Thorpe S J, Yoshino S, Thomas G A, et al. Blade-Tip Heat Transfer in a Transonic Turbine[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2005, 219(6): 421-430.
[26] Zhou K, Zhou C. Unsteady Effects of Vortex Interaction on Tip Leakage Vortex Breakdown and Its Loss Mechanism[J]. Aerospace Science and Technology, 2018, 82: 363-371.
[27] Zhang Q, He L. Overtip Choking and Its Implications on Turbine Blade-Tip Aerodynamic Performance[J]. Journal of Propulsion & Power, 2011, 27(5).
[28] Wang Y, Song Y, Yu J, et al. Effect of Cooling Injection on the Leakage Flow of a Turbine Cascade with Honeycomb Tip[J]. Applied Thermal Engineering, 2018, 133: 690-703.
[29] Niu M. , Zang S. Experimental and Numerical Investigations of Tip Injection on Tip Clearance Flow in an Axial Turbine Cascade[J]. Experimental Thermal and Fluid Science, 2011, 35(6): 1214-1222.
[30] 杜昆, 李军. 涡轮叶片凹槽状叶顶非定常流动传热特性的数值研究[J]. 推进技术, 2017, 38(3): 551-558.
[31] 周治华, 陈绍文, 李伟航, 等. 叶顶凹槽间隙气膜冷却的传热数值研究[J]. 推进技术, 2018, 39(3): 575-582.
[32] Kwak J S, Han J C. Heat Transfer Coefficients on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade[J]. Journal of Heat Transfer, 2003, 125(4): 778-787.
[33] Kwak J S, Ahn J, Han J C. Effects of Rim Location, Rim Height, and Tip Clearance on the Tip and near Tip Region Heat Transfer of a Gas Turbine Blade[J]. International Journal of Heat & Mass Transfer, 2004, 47(26): 5651-5663.
[34] Dunn M G, Haldeman C W. Time-Averaged Heat Flux for a Recessed Tip, Lip, and Platform of a Transonic Turbine Blade[J]. Journal of Turbomachinery, 2000, 122(4): 692-698.
[35] Papa M, Goldstein R J, Gori F. Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer from a Large-Scale Gas Turbine Blade[J]. Journal of Turbomachinery, 2003, 125(1): 285-293.
[36] Yang D L, Yu X B, Feng Z P. Investigation of Leakage Flow and Heat Transfer in a Gas Turbine Blade Tip with Emphasis on the Effect of Rotation[J]. Journal of Turbomachinery, 2010, 132(4).
[37] Park Jun Su, Lee Dong Hyun, RHee Dong Ho, et al. Heat Transfer and Film Cooling Effectiveness on the Squealer Tip of a Turbine Blade[J]. Energy, 2014, 72: 331-343.
[38] Mansouri Z, Settar A, Khamane H. Computational Investigation of Heat Load and Secondary Flows Near Tip Region in a Transonic Turbine Rotor with Moving Shroud[J]. Applied Thermal Engineering, 2018, 136: 141-151.
[39] Zhu N G, Xu L, Chen M Z. Similarity Transformations for Compressor Blading[J]. Journal of Turbomachinery, 1992, 114(3): 561-568.
[40] 赵强. 叶顶喷气对涡轮动叶叶尖流动及换热影响的研究[D]. 北京：北京航空航天大学， 2019.
[41] 邵飞. 涡轮叶尖泄漏精细流动机理及组织方法[D]. 北京：北京航空航天大学， 2017.
[42] Erhard J. Design, Construction and Commissioning of a Transonic Test-Turbine Facility[D]. Austria: Graz University of Technology, 2000.
[43] Young J B, Wilcock R C. Modeling the Air-Cooled Gas Turbine, Part 2： Coolant Flows and Losses[J]. Journal of Turbomachinery, 2002, 124(2): 207-213.
[44] Baker S. Regions of Recirculating Flow Associated with Two-Dimensional Steps[D]. England: University of Surrey, 1977.
[45] Zou Z, Xuan L, Chen Y, et al. Effects of Flow Structure on Heat Transfer of Squealer Tip in a Turbine Rotor Blade[J]. International Communications in Heat and Mass Transfer, 2020, 114(5).

涡轮转子凹槽叶尖泄漏流动气动热力特征

Aero-Thermodynamic Characteristics of Tip Leakage Flow in Turbine Rotor with Squealer Tip

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价