高负荷压气机叶栅内三维旋涡结构及其形成机理的研究进展

doi:10.13675/j.cnki.tjjs.200277

推进技术 ›› 2020, Vol. 41 ›› Issue (9): 1946-1957.DOI: 10.13675/j.cnki.tjjs.200277

高负荷压气机叶栅内三维旋涡结构及其形成机理的研究进展

钟兢军，阚晓旭

上海海事大学商船学院，上海 201306

出版日期:2020-09-15 发布日期:2020-09-15
基金资助:
国家自然科学基金（51436002；51906134）。

Research Progress on Three-Dimensional Vortex Structures and Formation Mechanism of High-Loaded Compressor Cascades

Merchant Marine College,Shanghai Maritime University,Shanghai 201306,China

Online:2020-09-15 Published:2020-09-15

摘要/Abstract

摘要： 压气机内的三维流场中存在着复杂的旋涡运动及气流分离，这些复杂的流体运动影响着压气机的高效及稳定运行，有必要了解并掌握压气机内旋涡结构的产生与发展机理。本文首先回顾了叶轮机械内经典的旋涡模型，重点综述了压气机叶栅旋涡模型的研究成果。然后，详细介绍了在矩形扩压叶栅和跨声速压气机静叶的旋涡结构方面取得的阶段性研究成果，分别讨论了三维旋涡结构的三种研究方法，验证了数值计算获取叶栅旋涡结构的可靠性，阐述了高负荷矩形扩压叶栅旋涡结构与流动损失的关联性，建立了跨声速压气机静叶三维定常旋涡结构模型，揭示了压气机静叶失速过程的涡动力学机理，并分析了非定常因素对静叶旋涡结构的影响规律。最后，针对今后在压气机旋涡结构的发展中会遇到的技术挑战和未来的发展方向做了几点展望。

关键词: 压气机叶栅;高负荷;旋涡结构;涡动力学;流动损失;综述

Abstract: There are complex vortex motion and flow separation in the three-dimensional flow field of the compressor, which affecting the efficient and stable operation of the compressor. It is necessary to understand and master the generation and development mechanism of the vortex structure in the compressor. It firstly reviewed the classic vortex structure models in the turbomachinery, and concentrated on the research results of compressor cascade vortex structure models. Then, research results on the vortex structures of linear compressor cascades and a transonic compressor stator were introduced in detail. Three types of research methods of three-dimensional vortex structure are discussed orderly, and the reliability of numerical calculation to obtain the cascade vortex structure is verified. The relationship between the vortex structures and the flow losses of a high-loaded linear compressor cascade is explained. It has established a three-dimensional steady vortex structure model of a transonic compressor stator, revealed the vortex dynamics mechanism of the compressor stator stall process, and analysed the influence law of unsteady factors to the compressor stator vortex structures. Finally, some technical challenges were pointed out and several prospects for the future development in the compressor vortex structures were made.

Key words: Compressor cascade;High-loaded;Vortex structure;Vortex dynamic;Flow loss;Review

钟兢军，阚晓旭. 高负荷压气机叶栅内三维旋涡结构及其形成机理的研究进展[J]. 推进技术, 2020, 41(9): 1946-1957.

ZHONG Jing-jun, KAN Xiao-xu. Research Progress on Three-Dimensional Vortex Structures and Formation Mechanism of High-Loaded Compressor Cascades[J]. Journal of Propulsion Technology, 2020, 41(9): 1946-1957.

参考文献

[1] 唐燕平, 陈懋章, 陈芳. 扩压叶栅中的旋涡运动[J]. 航空动力学报, 1990, 5(2): 103-112.
[2] Hawthorne W R. Some Formulae for the Calculation of Secondary Flow in Cascade[R]. ARC Report 17519, 1955.
[3] Klein A. Investigation of the Entry Boundary Layer on the Secondary Flows in the Blading of Axial Turbines[R]. BHRA Report T-1004, 1966.
[4] Langston L S. Crossflows in a Turbine Cascade Passage[J]. Journal of Engineering for Power, 1980, 102(4): 866-874.
[5] Sharma O P, Butler T L. Predictions of Endwall Losses and Secondary Flows in Axial Flow Turbine Cascades[J]. Journal of Turbomachinery, 1987, 109(2): 229-236.
[6] Goldstein R J, Spores R A, Turbulent Transport on the Endwall in the Region between Adjacent Turbine Blades[J]. Journal of Heat Transfer, 1988, 110: 862-869.
[7] Jabbari M Y, Goldstein R J, Marston K C, et al. Three Dimensional Flow within Large Scale Turbine Cascades[J]. W?rme-Und Stoffiibertragung, 1992, 27: 51-59.
[8] Wang H P, Olson S J, Goldstein R J, et al. Flow Visualization in a Linear Turbine Cascade of High Performance Turbine Blades[J]. Journal of Turbomachinery, 1995, 119(1): 1-8.
[9] Moore X X, Richardson Y Y. Skewed Boundary Layer Flow near End Walls of a Compressor Cascade[J]. ASME Journal of Engineering for Gas Turbines and Power, 1957, 79: 1789-1800.
[10] Horlock J H, Louis J F, Percival P M E, et al. Wall Stall in Compressor Cascades[J]. Journal of Basic Engineering, 1966, 88(3): 637-648.
[11] Salvage J W. Investigation of Secondary Flow Behavior and End Wall Boundary Layer Development through Compressor Cascades[R]. NASA-TR-22629, 1974.
[12] 陶德平, 卢仁富, 赵秀华. 压气机叶栅中的二次流动[J]. 北京航空学院学报, 1982， (4): 77-90.
[13] 陈芳, 陈懋章, 蒋浩康. 平面叶栅端壁流的试验研究[J]. 工程热物理学报, 1988, 9(2): 125-130.
[14] Kang S. Investigation of the Three Dimensional Flow within a Compressor Cascade with and without Tip Clearance[D]. Brussel： Vrije Universiteit Brussel, 1993.
[15] 于贤君, 刘宝杰, 张志博, 等. 近失速状态下压气机静子通道内的三维流动[J]. 工程热物理学报, 2009, 30(1): 53-56.
[16] Beselt C, Eck M , Peitsch D. Three-Dimensional Flow Field in Highly Loaded Compressor Cascade[J]. Journal of Turbomachinery, 2014, 136(10).
[17] Marchal P, Sieverding C H. Secondary Flow within Turbomachinery Blading. Secondary Flows in Turbomachines[R]. AGARD, CP214, 1977.
[18] Moore J, Smith B L. Flow in a Turbine Cascade， Part 2: Measurement of Flow Trajectories by Ethylene Detection[R]. ASME-GT-1983-69.
[19] Herzig H Z, Hansen A G, Costello G R. A Visualization Study of Secondary Flows in Cascades[R]. NACA-TR-1163, 1954.
[20] 张海灯, 吴云, 李应红, 等. 高速压气机叶栅旋涡结构及其流动损失研究[J]. 航空学报, 2014, 35(9).
[21] Lakshminarayana B, Horlock J H. Review: Secondary Flows and Losses in Cascades and Axial-Flow Turbomachines[J]. International Journal of Mechanical Sciences, 1963, 5(3): 287-307.
[22] Kan Xiaoxu, Wu Wanyang, Zhong Jingjun. Effects of Vortex Dynamics Mechanism of Blade-End Treatment on the Flow Losses in a Compressor Cascade at Critical Condition[J]. Aerospace Science and Technology, 2020, 102(7).
[23] 陈忠良, 郑群, 姜斌, 等. 高负荷氦气压气机矩形叶栅流动分离特性[J]. 哈尔滨工程大学学报, 2015, 36(3): 343-347.
[24] Lakshminarayana B, Horlock J. Tip Clearance Flow and Losses for an Isolated Compressor Blade[J]. Aeronautical Research Council Reports And Memoranda, 1963， (1): 1-27.
[25] 张华良, 王松涛, 王仲奇. 冲角对压气机叶栅内二次涡的影响[J]. 航空动力学报, 2006, 21(1): 150-155.
[26] 张华良. 采用叶片弯/掠及附面层抽吸控制扩压叶栅内涡结构的研究[D]. 哈尔滨: 哈尔滨工业大学, 2007.
[27] 丁骏, 王松涛, 刘勋, 等. 端弯联合弯叶片对叶栅旋涡结构和气动性能的影响[J]. 推进技术, 2016, 37(11): 2072-2079.
[28] Müller R, Sauer H, Vogeler K, et al. Influencing the Secondary Losses in Compressor Cascades by a Leading Edge Bulb Modification at the Endwall[R]. ASME-GT-2002-30442.
[29] Hergt A. über Grenzschichtbee-Influssende Ma?Nahmen in Den Randzonen Von Verdichtergittern[D]. Berlin: der Technischen Universit?t Berlin, 2011.
[30] Delery J, Meauze G. A Detailed Experi-Mental Analysis of the Flow in a Highly Loaded Fixed Compressor Cascade: the Iso-Cascade Cooperative Program on Code Validation[J]. Aerospace Science and Technology, 2003, 7(1): 1-9.
[31] Kang Shun, Wang Zhongqi. Application of Topological Analysis to Studying the Three-Dimensional Flow in Cascades Part I. Topological Rules for Skin-Friction Lines and Section Streamlines[J]. Applied Mathematics and Mechanics, 1990, 11(5): 489-495.
[32] 黄中岳, 王晓放. 透平式压缩机[M]. 北京：化学工业出版社, 2004.
[33] Ainley D G. Performance of Axial Flow Turbines[J]. Proceedings of the Institution of Mechanical Engineers, 1948, 159(1): 230-237.
[34] Horlock J H. Axial Flow Turbines[M]. London: Butterworths, 1966.
[35] 叶大均, 王仲奇. 叶轮机械真实流动损失机理及控制方法的研究[R]. 北京：清华大学, 1992.
[36] 钟兢军. 弯曲叶片控制扩压叶栅二次流动的实验研究[D]. 哈尔滨: 哈尔滨工业大学, 1996.
[37] 钟兢军, 高海洋, 孙鹏. 畸变条件下压气机静叶内部流场数值研究[J]. 工程热物理学报, 2013, 34(7)： 1234-1238.
[38] Hunt J C R, Waray A A, Moin P. Eddies Stream and Convergence Zones in Turbulent Flows[R]. NASA-N89-1988-24555.
[39] 吴艳辉, 丁永鹏, 安光耀, 等. 跨声速压气机转子叶尖涡系结构分析[J]. 工程热物理学报, 2016, 37(9): 1838-1844.
[40] 黄旭东, 陈海昕, 符松. 跨音速压气机中的涡结构与失速机理分析[J]. 空气动力学学报, 2007, 25(B12): 75-79.
[41] 钟兢军, 阚晓旭, 陆华伟, 等. 吸力面小翼对扩压叶栅旋涡结构的影响[J]. 工程热物理学报, 2014, 35(1): 46-50.
[42] Xiong S, Yang Y. Identifying the Tangle of Vortex Tubes in Homogeneous Isotropic Turbulence[J]. Journal of Fluid Mechanics, 2019, 874: 952-978.
[43] 杨越. 涡面场理论与应用[J]. 科学通报, 2020, 65(6): 483-495.
[44] 吴介之, 杨越. 关于旋涡定义的思考[J]. 空气动力学学报, 2020, 38(1): 1-8.
[45] Tian S, Gao Y, Dong X, et al. Definitions of Vortex Vector and Vortex[J]. Journal of Fluid Mechanics, 2017, 849: 312-339.
[46] Kan Xiaoxu, Wang Songtao, Luo Lei, et al. Numerical Analysis of the Weight Distribution of Flow Losses in a Highly Loaded Compressor Cascade with Different Incidences[J]. Applied Thermal Engineering, 2018, 139: 552-561.
[47] 陆华伟, 郭爽, 钟兢军, 等. 带根部间隙压气机静叶流道流动结构研究[J]. 工程热物理学报, 2012, 33(1): 51-54.
[48] Kan Xiaoxu, Lu Huawei, Zhong Jingjun. Topological Characterization of the Vortex Structures in the Transonic Compressor Stator During the Stalling Process[J]. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 2016, 230(3): 566-580.
[49] 吴介之. 旋涡——流体运动的肌腱[J]. 自然杂志, 1985, (7): 12-16.
[50] Kan Xiaoxu, Wang Songtao, Yang Ling, et al. Vortex Dynamic Mechanism of Curved Blade Affecting Flow Loss in a Compressor Cascade during the Corner Stall Process[J]. Aerospace Science and Technology, 2019, 85: 443-452.
[51] 阚晓旭，王松涛，罗磊，等. 基于流动损失权重分配的扩压叶栅弯叶片优化探究[J]. 工程热物理学报, 2018, 39(3)： 504-512.
[52] Kan Xiaoxu, Wu Wanyang, Yang Ling, et al. Effects of End-Bend and Curved Blades on the Flow Filed and Loss of a Compressor Linear Cascade in the Design Condition[J]. Journal of Thermal Science, 2019, 28(4): 801-810.
[53] Kan Xiaoxu, Wang Songtao, Luo Lei, et al. Research on the Applicability of Using Curved Blade to Optimize the Flow Losses Weight Distribution of a Linear Compressor Cascade with Different Flow Separation Types[R]. ASME-GT 2018-75936.
[54] 刘若阳, 侯安平, 单树军, 等. 基于DDES方法的叶栅分离旋涡的非定常流动数值研究[J]. 推进技术, 2017, 38(1): 16-26.
[55] Inoue M, Kuroumaru M. Three-Dimensional Structure and Decay of Vortices Behind an Axial Flow Rotation Blade Row[J]. ASME Journal of Engineering for Gas Turbine and Power, 1984, 106(3): 561-569.
[56] Wisler, D C. Advanced Compressor and Fan Systems[J]. Lecture Notes from UTSI Short Course Aero Propulsion, 1987, 9: 7-11.
[57] 沈孟育, 刘秋生. 跨音速压气机转子中三维湍流流场计算及涡系分析[J]. 航空学报, 1996, 17(6): 719-727.
[58] 王如根, 胡加国, 余超, 等. 跨声速压气机转子的二次流旋涡结构[J]. 推进技术, 2015, 36(4): 504-512.
[59] 吴艳辉, 刘军, 安光耀, 等. 单级轴流压气机叶端区二次流动的研究[J]. 航空动力学报, 2016, 31(10): 2376-2386.
[60] 吴艳辉, 安光耀, 陈智洋, 等. 跨声速压气机转子近失速工况非定常流动及相关机理研究[J]. 推进技术, 2016, 37(10): 1847-1854.
[61] Denton J D. Loss Mechanisms in Turbomachines[J]. Journal of Turbomachinery, 1993, 115 (4): 621-656.
[62] 张扬军, 陶德平. 跨音压气机叶栅的激波结构模型及损失[J]. 航空动力学报, 1995, 10(1): 33-37.
[63] Emmons H W, Pearson C E, Grant H P. Compressor Surge and Stall Propagation[J]. Transactions of the ASME, 1955, 77 (4) : 455-469.
[64] Greitzer E M. Surge and Rotating Stall in Axial Flow Compressors, Part I: Theoretical Compression System Model[J]. Journal of Engineering for Power, 1976, 98(2): 190-198.
[65] Greitzer E M. Surge and Rotating Stall in Axial Flow Compressors, Part II: Experimental Results and Comparison with Theory[J]. Journal of Engineering for Power, 1976, 98(2): 199-211.
[66] 杜娟, 王偲臣, 李继超, 等. 轴流压气机叶顶泄漏流与突尖先兆失稳机理的研究进展[J]. 推进技术, 2017, 38(10): 2208-2217.
[67] Suder K L. Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor Rotor[J]. Journal of Turbomachinery, 1996, 118: 218-229.
[68] 张皓光, 谭锋, 安康, 等. 不同转速下跨声速轴流压气机内部流动失稳的机理[J]. 航空动力学报, 2018, 33(6): 1370-1380.
[69] Yamada K, Furukawa M, Inoue M， et al. Numerical Analysis of Tip Leakage Flow Field in a Transonic Compressor Rotor[C]. Tokyo: Proceeding of the International Gas Turbine Congress, 2003.
[70] Yamada K, Funazaki K, Furukawa M. The Behavior of Tip Clearance Flow at Near-Stall Condition in a Transonic Axial Compressor Rotor[R]. ASME GT 2007-27725.
[71] Hofmann W H, Ballman J. Some Aspects of Tip Vortex Behavior in a Transonic Turbocompressor[R]. ISABE-2003-1223.
[72] Pullan G, Young A, Day I, et al. Origins and Structure of Spike-Type Rotating Stall[R]. ASME GT 2014-68707.
[73] Dodds J, Vahdati M. Rotating Stall Observations in a High Speed Compressor， PartⅠ: Experimental Study[J]. Journal of Turbomachinery, 2015, 137 (5).
[74] Li Q, Pan T, Li Z, et al. Experimental Study of Compressor Instability Inception in a Transonic Axial Flow Compressor[R]. ASME GT 2014-25190.
[75] 潘天宇, 孙太璐, 李志平, 等. 局部喘振的发生机理[J]. 航空动力学报, 2016, 31(4): 877-885.
[76] 武文倩, 胡加国, 潘天宇, 等. 叶根失速先兆触发跨声速压气机失速的机制研究[J]. 推进技术, 2017, 38(10): 2340-2347.
[77] 阚晓旭. 跨声速压气机静叶三维旋涡结构研究[D]. 大连: 大连海事大学, 2016.
[78] Kan Xiao-xu, Wang Song-tao, Luo Lei, et al. Investigation of the Vortex Dynamic Mechanism of the Flow Losses on a Transonic Compressor Stator[J]. Journal of Thermal Science, 2019, 28(1): 51-60.
[79] 阚晓旭, 陆华伟, 钟兢军. 动叶尾迹对跨声速压气机静叶非定常分离结构的影响研究[J]. 工程热物理学报, 2015, 36(4): 744-751.

高负荷压气机叶栅内三维旋涡结构及其形成机理的研究进展

Research Progress on Three-Dimensional Vortex Structures and Formation Mechanism of High-Loaded Compressor Cascades

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价