亚声速S弯进气道研究的新进展

doi:10.13675/j.cnki.tjjs.200493

推进技术 ›› 2020, Vol. 41 ›› Issue (12): 2641-2658.DOI: 10.13675/j.cnki.tjjs.200493

• 综述 • 下一篇

亚声速S弯进气道研究的新进展

黄河峡^1,2，孙姝³，于航¹，谭慧俊¹，林正康¹，李子杰¹，汪昆¹

1.南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室，江苏南京 210016;2.清华大学航天航空学院，北京 100084;3.南京航空航天大学民航/飞行学院，江苏南京 210016

发布日期:2021-08-15
作者简介:黄河峡，博士，讲师，研究领域为内流空气动力学。E-mail：huanghexia@nuaa.edu.cn
基金资助:
国家自然科学基金（51906104；11772156；11532007）；江苏省自然科学基金（BK20190385）；航空动力基金（6141B09050387）；江苏省“333”工程资助项目（BRA2018031）。

Recent Progress in Subsonic S-Shaped Inlets

1.Jiangsu Province Key Laboratory of Aerospace Power System，College of Energy and Power Engineering， Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China;2.School of Aerospace Engineering，Tsinghua University，Beijing 100084，China;3.College of Civil Aviation，Nanjing University of Aeronautics and Astronautics，Nanjing 210016，China

Published:2021-08-15

摘要/Abstract

摘要： 当前推进系统与飞行器正朝着高度融合的方向发展，超紧凑蛇形进气道和边界层吸入式进气道则是实现两者融合的关键之一。本文综述了近十余年来国内外关于这两类亚声速S弯进气道的最新研究进展。受显著横向压力梯度、流向逆压梯度的作用，两类进气道内部均存在明显的流动分离，并诱发了大尺度的流向对涡和显著的出口总压畸变。为此，研究者发展了被动式、主动式、混合式等多种流动控制方法，可在不显著增加总压损失的前提下，大幅降低设计工况时出口周向总压畸变。并且，已经建立可适应任意异形进口的S弯进气道气动型面通用设计方法。最后，已有的CFD方法可以较为准确地预测AIP截面平均总压恢复系数，但畸变指数偏差较大。

关键词: 进气道;边界层;流动分离;旋涡;流动控制;综述

Abstract: Currently the propulsion system and aircraft tend to be highly integrated， the ultra-compact serpentine inlet and boundary layer ingesting inlet are the keys to realize the fusion. This article reviews the latest research progress of the two types of subsonic S-shaped inlets in related fields at home and abroad in recent ten years. Remarkable flow separation， induced by the transverse and streamwise adverse pressure gradients， are generated within the two types of inlets， forming pairs of large scale vortices and apparent total pressure distortion at outlet. Therefore， researchers have developed a variety of passive， active and hybrid flow control methods， which can lower the distortion index of circumferential total pressure without significant increasing of the total pressure loss in the design condition. Moreover， a general design method for the aerodynamic profile of the S-shaped inlets has been established， which can be adopt to any special entrance shape. Finally， the current CFD methods can accurately predict the time-averaged total pressure recovery coefficient at AIP （Aerodynamic Interface Plane）， but the predicted distortion index deviation is large.

Key words: Inlet;Boundary layer;Flow separation;Vortices;Flow control;Review

黄河峡，孙姝，于航，谭慧俊，林正康，李子杰，汪昆. 亚声速S弯进气道研究的新进展[J]. 推进技术, 2020, 41(12): 2641-2658.

HUANG He-xia^1,2, SUN Shu³, YU Hang¹, TAN Hui-jun¹, LIN Zheng-kang¹, LI Zi-jie¹, WANG Kun¹. Recent Progress in Subsonic S-Shaped Inlets[J]. Journal of Propulsion Technology, 2020, 41(12): 2641-2658.

参考文献

[1] Seddon J， Goldsmith E L. Intake Aerodynamics［M］. Reston： AIAA Education Series， 1985.
[2] Wallis V C， Robert B. Advanced Propulsion System Design and Integration for a Turbojet Powered Unmanned Aerial Vehicle［R］. AIAA 2003-415.
[3] Guo R W， Seddon J. The Swirl in an S-Duct of Typical Air Intake Proportions［J］. Aeronautical Quarterly， 1983， 34： 99-129.
[4] Vakili A， Wu J M， Liver P， et al. Measurements of Compressible Secondary Flow in a Circular S-Duct［R］. AIAA 83-1739.
[5] Guo R W， Seddon J. An Investigation of the Swirl in an S-Duct［J］. Aeronautical Quarterly， 1982， 33： 25-58.
[6] Guo R W， Seddon J. Swirl Characteristics of an S-Shaped Air Intake with Both Horizontal and Vertical Offsets［J］. Aeronautical Quarterly， 1983， 34： 130-146.
[7] Abd Ellatif O E， Abd Rabbo M， Abd Elganny M， et al. Area Ratio Effect on the Turbulent Flow Through a Diffusing S-Duct Using Large-Eddy Simulation［C］. Cleveland： 6th International Energy Conversion Engineering Conference （IECEC）， 2008.
[8] 石磊，郭荣伟. 蛇形进气道的电磁散射特性［J］. 航空学报， 2007， 28（6）： 1296-1301.
[9] Hamstra J W， Miller D N， Truax P P， et al. Active Inlet Flow Control Technology Demonstration［J］. Aeronautical Journal， 2000， 104： 473-479.
[10] Shaw R W. Advanced Compact Inlet Systems Inlet Analysis［R］. WL-TR-96-3038.
[11] Sun S， Guo R W. Serpentine Inlet Performance Enhancement Using Vortex Generator Based Flow Control［J］. Chinese Journal of Aeronautics， 2006， 19（1）： 10-17.
[12] Mayer D， Anderson B， Johnson T. 3D Subsonic Diffuser Design and Analysis［R］. AIAA 98-3418.
[13] Brear M J， Warfield Z， Mangus J F， et al. Flow Separation Within the Engine Inlet of an Uninhabited Combat Air Vehicle （UCAV）［J］. Journal of Fluids Engineering， Transactions of the ASME， 2004， 126（2）： 266-272.
[14] Perry A E， Chong M S. A Series-Expansion Study of the Navier-Stokes Equations with Applications to Three-Dimensional Separation Patterns［J］. Journal of Fluid Mechanics， 1986， 173： 207-223.
[15] Gerolymos G A， Joly S， Mallet M， et al. Reynolds-Stress Model Flow Prediction in Aircraft-Engine Intake Double-S-Shaped Duct［J］. Journal of Aircraft， 2010， 47（4）： 1368-1381.
[16] 孙姝. 非常规进气道的设计、试验以及仿真研究［D］. 南京：南京航空航天大学， 2006.
[17] Sun S， Tan H J. Flow Characteristics of an Ultracompact Serpentine Inlet with an Internal Bump［J］. Journal of Aerospace Engineering， 2018， 31（2）.
[18] Delot A L， Berens T M， Tormalm M， et al. DES Computations for a Subsonic UAV Configuration with a Highly Integrated S-Shaped Inlet Duct［R］. AIAA 2014-0723.
[19] Aref P， Jirásek A， Ghoreyshi A M， et al. Computational Design of S-Duct Intakes for the NATO AVT-251 Multi-Disciplinary Configuration［R］. AIAA 2018-3164.
[20] 靖建朋，郭荣伟. 一种双S弯非常规进气道地面工作状态的试验［J］. 航空动力学报， 2006， 21（5）： 903-908.
[21] Hall D K， Huang A C， Uranga A， et al. Boundary Layer Ingestion Propulsion Benefit for Transport Aircraft［J］. Journal of Propulsion and Power， 2017， 33（5）： 1118-1129.
[22] 达兴亚，范召林，熊能，等. 分布式边界层吸入推进系统的建模与分析［J］. 航空学报， 2018， 39（7）： 113-121.
[23] Anabtawi A J， Blackwelder R， Liebeck R， et al. Experimental Investigation of Boundary Layer Ingesting Users of a Semi-Circular Cross Section［R］. AIAA 98-945.
[24] 宁乐，谭慧俊，孙姝. 有无边界层吸入对S弯进气道流动特性的影响［J］. 推进技术， 2017， 38（2）： 266-274.
[25] 刘雷. S弯进气道出口畸变控制及其对跨声速风扇流场影响研究［D］. 哈尔滨：哈尔滨工业大学， 2015.
[26] McMillan M L， Mackie S A， Gissen A， et al. Inlet Flow Control and Prediction Technologies for Embedded Propulsion Systems［R］. NASA-CR-2011-217237.
[27] Rein M， Koch S， Rütten M. Experimental Investigations on the Influence of Ingesting Boundary Layers into a Diverterless S-Duct Intake［R］. AIAA 2014-0373.
[28] Simpson R L. Junction Flows［J］. Annual Review of Fluid Mechanics， 2001， 33： 415-443.
[29] Gissen A N， Vukasinovic B， Mcmillan M， et al. Distortion Management in a Boundary Layer Ingestion Inlet Diffuser Using Hybrid Flow Control［J］. Journal of Propulsion and Power， 2014， 30（3）： 834-844.
[30] Anabtawi A J， Blackwelder R F， Lissaman P B S， et al. An Experimental Study of Vortex Generators in Boundary Layer Ingesting Diffusers with a Centerline Offset［R］. AIAA 99-2110.
[31] Berrier B L， Allan B G. Experimental and Computational Evaluation of Flush-Mounted， S-Duct Inlets［R］. AIAA 2004-764.
[32] Liou M-S， Lee B J. Characterization of Aerodynamic Performance of Boundary-Layer-Ingesting Inlet under Crosswind［R］. ASME GT 2012-68509.
[33] Daggett D L， Kawai R， Friedman D. Blended Wing Body Systems Studies： Boundary Layer Ingestion Inlets with Active Flow Control［R］. NASA CR-2003-212670.
[34] 宁乐. BLI进气道流动特性的地面模拟方法和初步实验研究［D］. 南京：南京航空航天大学， 2016.
[35] Tanguy G， Macmanus D G， Zachos P K， et al. Passive Flow Control Study in an S-Duct Using Stereo Particle Image Velocimetry［J］. AIAA Journal， 2017， 55（6）： 1862-1877.
[36] Jirásek A. Evaluation of the Vortex Generator Flow Control in the FOI-EIC-01 Inlet at Different Flight Conditions［R］. AIAA 2007-5065
[37] Ng Y T， Luo S， Lim T T， et al. Three Techniques to Control Flow Separation in an S-Shaped Duct［J］. AIAA Journal， 2011， 49（9）： 1825-1832.
[38] Yi J， Kim C， Lee B J， et al. Adjoint-Based Design Optimization of Vortex Generator in an S-Shaped Subsonic Inlet［J］. AIAA Journal， 2012， 50（11）： 2492-2507.
[39] Owens L R， Allan B G， Gorton S A. Boundary-Layer-Ingesting Inlet Flow Control［R］. AIAA 2006-839.
[40] Harrison N A， Anderson J， Fleming J L， et al. Active Flow Control of a Boundary Layer-Ingesting Serpentine Inlet Diffuser［J］. Journal of Aircraft， 2013， 50（1）： 262-271.
[41] Jirásek A. Design of Vortex Generator Flow Control in Inlets［J］. Journal of Aircraft， 2006， 43（6）： 1886-1892.
[42] 谢文忠，郭荣伟. 蛇形进气道涡控设计研究［J］. 航空学报， 2011， 32（10）： 1806-1814.
[43] Da X， Fan Z， Fan J， et al. Microjet Flow Control in an Ultra-Compact Serpentine Inlet［J］. Chinese Journal of Aeronautics， 2015， 28（5）： 1381-1390.
[44] Burrows T J， Vukasinovic B， Glezer A. Flow Dynamics Effected by Active Flow Control in an Offset Diffuser［R］. AIAA 2018-4024.
[45] Tormalm M. Flow Control Using Vortex Generators or Micro-Jets Applied in an UCAV Intake［R］. AIAA 2014-0724.
[46] Gartner J， Amitay M. Flow Control in a Diffuser at Transonic Conditions［R］. AIAA 2015-2484.
[47] Vaccaro J C， Sahni O， Olles J， et al. Experimental and Numerical Investigation of Active Control of Inlets Ducts［J］. International Journal of Flow Control， 2009， 1（2）： 133-154.
[48] Kostas J， Foucault J M， Stanislas M. The Flow Structure Produced by Pulsed-Jet Vortex Generators in a Turbulent Boundary Layer in an Adverse Pressure Gradient［J］. Flow， Turbulence and Combustion， 2007， 78（3）： 331-363.
[49] Gorton S A， Owens L R， Jenkins L N， et al. Active Control on a Boundary-Layer-Ingesting Inlet［R］. AIAA 2004-1203.
[50] Glezer A， Amitay M. Synthetic Jets［J］. Annual Review of Fluid Mechanics， 2003， 34（1）： 503-529.
[51] Raghu S. Fluidic Oscillators for Flow Control［J］. Experiments in Fluids， 2013， 54（2）： 1455.
[52] Louis N C， Mark S. Actuators for Active Flow Control［J］. Annual Review of Fluid Mechanics， 2011， 43： 247-272.
[53] Vukasinovic B， Burrows T J， Glezer A， et al. Experimental and Numerical Investigation of Controlled Flow Distortion in a Subsonic Offset Diffuser by Trapped Vorticity［R］. AIAA 2017-1454.
[54] Lakebrink M T， Mani M， Winkler C. Numerical Investigation of Fluidic-Oscillator Flow Control in an S-Duct Diffuser［R］. AIAA 2017-1455.
[55] Lakebrink M T， Mani M. Numerical Investigation of Dynamic Distortion and Flow Control in a Serpentine Diffuser［R］. AIAA 2018-1283.
[56] Garnier E. Flow Control by Pulsed Jet in a Curved S-Duct： A Spectral Analysis［J］. AIAA Journal， 2015， 53（10）： 2813-2827.
[57] Wang Lin， Luo Zhenbing， Xia Zhixun， et al. Review of Actuators for High Speed Active Flow Control［J］. Science China Technological Sciences， 2012， 55（8）： 2225-2240.
[58] 吴云，李应红. 等离子体流动控制研究进展与展望［J］. 航空学报， 2015， 36（2）.
[59] Yang H， Li F， Song Y， et al. Numerical Investigation of Electrohydrodynamic （EHD） Flow Control in an S-Shaped Duct［J］. Plasma Science & Technology， 2012， 14（10）： 897-904.
[60] Webb N J， O'Neill C， Samimy M. Aggressively-Offset Inlet Flow Facility Design and Characterization［R］. AIAA 2020-1614.
[61] O'Neill C. Active Flow Control in a Compact High-Speed Inlet/Diffuser Model［R］. AIAA 2020-0112.
[62] Scribben A R， Ng W， Burdisso R. Effectiveness of a Serpentine Inlet Duct Flow Control Technique at Design and Off-Design Simulated Flight Conditions［J］. Journal of Turbomachinery， 2006， 128（2）： 332-339.
[63] Gissen A N， Vukasinovic B， Glezer A. Dynamics of Flow Control in an Emulated Boundary Layer-Ingesting Offset Diffuser［J］. Experiments in Fluids， 2014， 55（8）.
[64] Lee C， Boedicker C. Subsonic Diffuser Design and Performance for Advanced Fighter Aircraft［R］. AIAA 1985-3073.
[65] 余安远. 隐身外形飞行器用埋入式进气道的设计及气动性能研究［D］. 南京：南京航空航天大学， 2003.
[66] 王庆林. 超椭圆进气道的设计［J］. 洪都科技， 1990，（4）： 1-6.
[67] 李岳锋，杨青真，孙志强. 超椭圆S形进气道的设计及气动性能研究［J］. 计算机仿真， 2011， 28（3）： 82-85.
[68] 黄晨，谢文忠，靖建朋. 基于Nurbs曲线的涡控蛇形进气道设计［J］. 航空动力学报， 2013， 28（10）： 2355-2363.
[69] 周慧晨，谭慧俊，李湘萍. 复杂变截面进气道的一种设计方法［J］. 航空动力学报， 2009， 24（6）： 1357-1363.
[70] 陈健华. 附面层吸入式进气道主动流动控制研究［D］. 哈尔滨：哈尔滨工业大学， 2009.
[71] 桑振坤. 半埋入式S弯进气道优化设计及主动流动控制技术研究［D］. 哈尔滨：哈尔滨工业大学， 2010.
[72] Guerrero-Hurtado M， Zachos P K， Macmanus D G， et al. Unsteady Swirl Distortion Characteristics for S-Ducts Using Lattice Boltzmann and Time-Resolved， Stereo PIV Methods［R］. AIAA 2019-4275.
[73] Vaccaro J C， Elimelech Y， Chen Y， et al. Experimental and Numerical Investigation on the Flow Field Within a Compact Inlet Duct［J］. International Journal of Heat and Fluid Flow， 2013， 44： 478-488.
[74] Dorgan A J， Winkler C M. BCFD Analysis for the 1st AIAA Propulsion Workshop： S-Duct Results［R］. AIAA 2013-3792.
[75] Babcock D， Maniy M. BCFD Simulations of the 2nd AIAA Propulsion and Aerodynamics Workshop： S-Duct with Vortex Generators［R］. AIAA 2015-3959.
[76] Lima L S M， Jesus A B， Huebner R. Analysis of Geometric Features and Mesh Parameters on the 3rd PAW S-Duct Case［R］. AIAA 2017-4910.
[77] Deric A B， Luiz T N， Zach S D. Summary of the 4th Propulsion Aerodynamics Workshop： S-Duct Results［R］. AIAA 2019-3845.
[78] Choi H， Moin P. Grid-Point Requirements for Large Eddy Simulation： Chapman’s Estimates Revisited［J］. Physics of Fluids， 2012， 24（1）.
[79] Chad M. Winkler， Davis Zach S.. Summary of the 3rdPropulsion Aerodynamics Workshop： S-Duct Results［R］. AIAA 2017-4912.
[80] Berens T M， Delot A L， Tormalm M， et al. Numerical and Experimental Investigations on Highly Integrated Subsonic Air Intakes［R］. AIAA 2014-0722.
[81] Berens T M， Delot A L， Chevalier M， et al. Numerical Simulations for High Offset Intake Diffuser Flows［R］. AIAA 2014-0371.
[82] Thompson R J， Komives J R. Compressible Flow Through a Diffusing Serpentine Inlet Duct Assessed with Wall-Modeled Large Eddy Simulation［R］. AIAA 2019-3702.
[83] Piomelli U. Wall-Layer Models for Large-Eddy Simulations［J］. Progress in Aerospace Sciences， 2008， 44： 437-446.

亚声速S弯进气道研究的新进展

Recent Progress in Subsonic S-Shaped Inlets

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价