推进技术 ›› 1989, Vol. 10 ›› Issue (2): 48-51.
• • 上一篇 下一篇
纪秋颖,李稑,赵元修
发布日期:
Published:
摘要: 用CO2激光点火试验设备,对Al+KClO4点火药进行点燃性能试验.试验结果表明,随着点火热流密度的增大,点火延迟时间减小.说明点火热流密度是点火药点燃性能中非常重要的控制量.点火药密度越小点火延迟时间也越小.在点火药主组分中加入少量固态硫作为粘合剂,会使点火药的点燃性能更好.
关键词: 固体推进剂点火;点火能量;点火试验;点火药;激光点火;固体火箭发动机
Abstract: The ignition feature of charge A1 + KC104 is investigated experimentally with CO2 laser ignition equipment in this paper. The experimental results show that ignition delay decreased with the increase of ignition heat flux, which proves that ignition heat flux is a much important control parameter in charge ignition performances. The lower the density of the charge is, the shorter the ignition delay. Furthermore, a litter added in the composition of this charge as adhesion agent will improve the ignition performances.
Key words: Solid propellant ignition;Ignition energy;Ignition test;Ignition charge;Laser ignition;Solid roeket engine
纪秋颖,李稑,赵元修. CO2激光点燃点火药的试验研究[J]. 推进技术, 1989, 10(2): 48-51.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://jpt.tjjsjpt.com/CN/
http://jpt.tjjsjpt.com/CN/Y1989/V10/I2/48
小助手微信:tjjsxzs
公众号:casic-tjjs
《推进技术》手机版