推进技术 ›› 1990, Vol. 11 ›› Issue (5): 30-34.
• • 上一篇 下一篇
祁锋
发布日期:
Published:
摘要: 本文对几种发动机的冷却作了分析比较,指出使用铜锆合金是高压大热流发动机的必然要求.对大推力氢氧烃三组元试验发动机燃烧室的传热分析表明:热流仅相当于相同推力氢氧双组元发动机的1/3~1/2,热壁温低于800K,完全满足设计要求,但流阻较大,对氢泵不利.
关键词: 多元燃料发动机;火箭发动机燃烧室;传热;计算
Abstract: The heat transfer analysis on several rocket engines has completed in this paper.It is inevitable for copper-zirconium alloy to be used in hight pre- ssure great heat flux rocket engines. After analyzing the hydrogen-oxygen-hydrocarbon tripropellant rocket engine, we recognized that the heat flux is 1/3 to 1/2 that of hydrogen-oxygen propellant rocket engine with the same thrust.The gas-side wall temperatures satisfy completely the design request which are lower than 800K.But the pressure drop is so large as unfavourable to the hydrogen pump.
Key words: Multifuel engine;Rocket combustion chamber;Heat transfer;Computation
祁锋. 氢氧烃三组元发动机燃烧室传热、流阻初步分析[J]. 推进技术, 1990, 11(5): 30-34.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://jpt.tjjsjpt.com/CN/
http://jpt.tjjsjpt.com/CN/Y1990/V11/I5/30
小助手微信:tjjsxzs
公众号:casic-tjjs
《推进技术》手机版