推进技术 ›› 1995, Vol. 16 ›› Issue (2): 4-10.
• • 上一篇 下一篇
刘学文
发布日期:
Published:
摘要: 介绍了脉冲激励法(锤击法)模态试验系统。该法设备简单,使用方便,移动施力部位容易,可以在不允许安装激振器的部位实现激振,具有许多明显的优点。试验结果可提供给导弹总体设计部门,以检验发动机与弹体配匹的结构动态特性,并可供发动机振动分析之用。
关键词: 涡轮喷气发动机;模态分析;模态振动试验
Abstract: The pulse-excitation method (hammer-excitation method) for modal test is introduced,demonstrating following advantages:simple equipment and installations, convenient manipulation and easy excitation point movement,which makes the excitation realized in such positions where installation of exciters are not permited. The tested results will be submitted to the genaral design department of× × missile to check structural dynamic properties of the engine fitting to the missile, also will be used for vibration analysis of the engine.
Key words: Turbojet engine;Modal analysis;Modal vibration test
刘学文. ××-2发动机本体的试验模态分析[J]. 推进技术, 1995, 16(2): 4-10.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://jpt.tjjsjpt.com/CN/
http://jpt.tjjsjpt.com/CN/Y1995/V16/I2/4
小助手微信:tjjsxzs
公众号:casic-tjjs
《推进技术》手机版