倒置喷管发动机性能测定方法的比较与分析

推进技术 ›› 1995, Vol. 16 ›› Issue (3): 26-29.

倒置喷管发动机性能测定方法的比较与分析

毛根旺,陈福连,牛嵩高,吴建政

西北工业大学航天工程学院;西北工业大学航天工程学院;西北工业大学航天工程学院;西北工业大学航天工程学院

发布日期:2021-08-15

COMPARISON AND ANALYSES ON DETERMINING METHODS FOR PROPERTIES OF INVERSE NOZZLE ROCKET MOTORS

Coll. of Astronautics, Northwestern Polytechnical Univ. Xi’an, 710072;Coll. of Astronautics, Northwestern Polytechnical Univ. Xi’an, 710072;Coll. of Astronautics, Northwestern Polytechnical Univ. Xi’an, 710072;Coll. of Astronautics, Northwestern Polytechnical Univ. Xi’an, 710072

Published:2021-08-15

摘要/Abstract

摘要： 采用三种试验方案对喷管倒置１５０°引起的比冲损失进行了测定、分析和比较。结果表明，双室串并发动机顺倒置四喷管引起的比冲相对损失为１．８％左右；如果将顺置采用单喷管，那么该项损失大约为４．１％。采用双室串并发动机时，测试系统和判读系统误差不能进入测试数据中，所以它比单独采用顺置和倒置时测定的数据可靠。

关键词: 固体推进剂火箭发动机;发动机喷管;喷管效率

Abstract: he loss of impulses caused by inverse nozzles with 150° has been determined, analyzed and compared through three kinds of tests. It turns out that the relative loss of impulses caused by common and inverse 4 nozzles in double-chamber series-parallel rocket motors is about 1. 8 %. When a single nozzle was used in solid rocket motors with common nozzle, the loss would be about 4. 1%. Since the errors of measuring and deciding systems can not be led into measurement data, determined data is more reliable than those determined by single common and inverse nozzles, when double-chamber series-parallel rocket motors are used.

Key words: Solid propellant rocket engine;Engine nozzle;Nozzle efficiency

毛根旺,陈福连,牛嵩高,吴建政. 倒置喷管发动机性能测定方法的比较与分析[J]. 推进技术, 1995, 16(3): 26-29.