推进技术 ›› 1997, Vol. 18 ›› Issue (3): 59-63.

• • 上一篇    下一篇

螺旋桨的优化设计

刘振侠   

  1. 西北工业大学航空动力与热力工程系!西安;710072
  • 发布日期:2021-08-15

OPTIMUM DESIGN FOR PROPELLERS

  1. Dept. of Aeroengine Engineering, Northwesterm Polytechnical Univ., Xi’an, 710072
  • Published:2021-08-15

摘要: 结合对某型螺旋桨的改型设计,运用Betz优化理论发展了一套螺旋桨优化设计方法及设计和性能计算程序。将设计得到的螺旋桨进行缩尺模型吹风试验,结果表明所设计的螺桨性能在起飞/爬升状态及巡航状态比原桨均提高3%。

关键词: 螺旋桨;螺旋桨理论;最优设计

Abstract: This paper analyzes the basic problems of moden method of propeller design anddeveloped a computer procedure to design optimum propellers according to Betz optimization theory. Aset of propellers used now are redesigned and the property of the new and the old one are allcalculated at taking off, climbing and cruising coditions. The comparison tunnel tests of scaled modelsof the old and redesigned propellers have been done. The experiment result states that the efficiencyof the redesigned propellers increases by a factor of 3% compared with that of the old one at eachfight condition.

Key words: Propeller;Propeller theory;Optimum design