推进技术 ›› 1998, Vol. 19 ›› Issue (5): 47-51.
• • 上一篇 下一篇
张明川,唐狄毅
发布日期:
Published:
摘要: 建立了预测轴流压气机工作稳定性的非线性模型,采用有限差分数值模拟单转子和一台三级轴流压气机旋转失速的形成和发展过程,预测失速特征参数。由于合理地考虑了失速流动的非定常和非线性因素的影响,大多数失速特征参数的预测结果与试验测量值相符。
关键词: 轴流式压缩机;旋转失速;失速特性;数值仿真
Abstract: A nonlinear,two dimension,compressible dynamic model of instability prediction of axial flow compressors was described.The flow dynamics were presented by unsteady Euler equations and semi empirical correlation.The development of stall cell and the characteristic parameters of rotating stall in a single rotor and a three stage axial flow compressor were simulated by numerical method.Most of the simulation results agree well with the experimental data
Key words: Axial flow compressor;Rotating stall;Stalling characteristic;Numerical simulation
张明川,唐狄毅. 预测轴流压气机工作稳定性的非线性模型[J]. 推进技术, 1998, 19(5): 47-51.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://jpt.tjjsjpt.com/CN/
http://jpt.tjjsjpt.com/CN/Y1998/V19/I5/47
小助手微信:tjjsxzs
公众号:casic-tjjs
《推进技术》手机版