推进技术 ›› 1999, Vol. 20 ›› Issue (2): 64-68.

• • 上一篇    下一篇

叶片前缘气膜冷却换热的实验研究

朱惠人,许都纯,郭涛,刘松龄   

  1. 西北工业大学航空动力与热力工程系;西北工业大学航空动力与热力工程系;西北工业大学航空动力与热力工程系;西北工业大学航空动力与热力工程系
  • 发布日期:2021-08-15

EXPERIMENTAL INVESTIGATION OF FILM COOLING HEAT TRANSFER ON TURBINE BLADE LEADING EDGE

  1. Dept.of Aeroengine Engineering,Northwestern Polytechnical Univ ,Xi′an,710072;Dept.of Aeroengine Engineering,Northwestern Polytechnical Univ ,Xi′an,710072;Dept.of Aeroengine Engineering,Northwestern Polytechnical Univ ,Xi′an,710072;Dept.of Aeroengine Engineering,Northwestern Polytechnical Univ ,Xi′an,710072
  • Published:2021-08-15

摘要: 对叶片前缘多排圆柱形孔的气膜冷却换热进行了实验研究。测出了不发生主流侵入腔室的最小平均吹风比、孔排区及其下游的局部换热系数,并研究了主流雷诺数及平均吹风比对局部换热系数比的影响。实验参数范围:主流雷诺数Re=42000~127000,平均吹风比M=0.8~2.0,测量分8个工况进行。

关键词: 涡轮叶片;薄膜冷却;气体冷却;传热

Abstract: Heat transfer of rows on leading edge of turbine blade was studied experimentally. Minimum blowing rate with no ingress of gas into cavity,and local heat transfer coefficients on the leading edge and the flat side wall were measured. The influences of mainstream Reynolds number and blowing rate on heat transfer coefficients were described. The test parameters are the mainstream Reynolds number from 42 000 to 127 000 and blowing rate from 0 8 to 2 0.

Key words: urbine blade;Film cooling;Gas cooling;Heat transfer