燃气源开槽导管出口烧蚀特性分析

推进技术 ›› 1999, Vol. 20 ›› Issue (6): 80-83.

燃气源开槽导管出口烧蚀特性分析

程雪玲,张平

北京理工大学机电工程学院!北京;100081;北京理工大学机电工程学院!北京;100081

发布日期:2021-08-15

ANALYSIS OF EROSION AT THE SLOTTED TUBE EXIT SURFACES OF A HOT GAS GENERATOR

School of Electro Mechanical Engineering,Beijing Inst.of Technology,Beijing,100081;School of Electro Mechanical Engineering,Beijing Inst.of Technology,Beijing,100081

Published:2021-08-15

摘要/Abstract

摘要： 针对某火箭弹控制系统燃气源在点火试验过程中出现的导管出口烧蚀现象，利用数值计算模拟气流流动参数分布，考虑到导管管壁的非稳态传热过程，计算出不同时刻在导管开槽出口附近管壁的温度分布，得出与试验一致的结论

关键词: 燃气发生器;喷管气流;管道流;开缝壁;烧蚀性能;数值计算

Abstract: According to the erosive phenomena at the slotted tube exit surfaces of the hot gas generator used for a missile control system during static firing experiments,the distributions of flowfield parameters in the tube were simulated by a numerical analysis method.Considering the non steady heat conduction process in the tube wall,the temperature distribution nearing exit slots in different time was computed.The computational results are in accordance with those of the experiments.

Key words: Gas generator;Nozzle flow;Channel flow;Slotted wall;Ablation property;Numerical computation

程雪玲,张平. 燃气源开槽导管出口烧蚀特性分析[J]. 推进技术, 1999, 20(6): 80-83.