推进技术 ›› 2000, Vol. 21 ›› Issue (2): 1-4.

• •    下一篇

适用于航空涡轮全三维设计的气动设计体系

袁宁,张振家,王松涛,顾中华,王仲奇,冯国泰   

  1. 哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;航天机电集团公司31所!北京100074;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001;哈尔滨工业大学能源科学与工程学院!黑龙江哈尔滨150001
  • 发布日期:2021-08-15
  • 基金资助:
    国家自然科学基金资助项目! (596361 80 )

Aerodynamic design system adapting to three dimensional turbine

  1. School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China;The 31st Research Inst.,Beijing 100074,China;School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China;School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China;School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China;School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China
  • Published:2021-08-15

PDF

摘要： 建立了一种以考虑损失的多级三维无粘定常计算程序为主的设计体系 ,该体系考虑了多级透平工作中的变比热容和冷气掺混 ,叶列间参数传递处理上采用了 Rieman解和松弛因子提高程序的稳定性 ,在二维基准截面造型中采用了三次有理 B样条曲线成型 ,三维叶片积迭采用 Besier曲线生成母线。此设计体系同时依赖于一个损失估算体系 ,用来较准确地估算涡轮效率。设计实践证明该体系适用于现代涡轮的全三维设计

关键词: 涡轮风扇发动机;二级涡轮;三维流;流动分布;定常流;气动设计

Abstract: A 3 D design system was applied to modern turbine design. The main calculating program of this system was a 3 D mutistage inviscous calculating program with loss model as well as the varying specific heat and cooled air mixing. The stability of the method in interrow mixing treatment was improved by Rieman solver and lax gene. Profile in 2 D datum plane was made by applying the rational B spline approximation form. The 3 D blade was mounded using Besier curve.This design system included a loss model system in order to assess the effect of turbine accurately.

Key words: Turbofan ergine;Two stage turbine;Three dimonsion flow;Flow distribution;Steady flow;Aerodynamic design

地址：北京7208信箱26分箱

邮政编码：100074

E-mail：tjjs@sina.com

    专业栏目
  • 总体与系统
  • 气动热力学
  • 燃烧 传热 传质
  • 结构 强度 可靠性
  • 测试 试验 控制
  • 材料 推进剂 燃料
  • 舰船推进
  • 电推进和其它推进

访问总数：今日访问： 版权所有 © 《推进技术》编辑部