推进技术 ›› 2000, Vol. 21 ›› Issue (3): 49-52.

• • 上一篇    下一篇

处理机匣在单级跨声速风扇上的实验研究

李玲,于清,陆亚钧   

  1. 清华大学水利水电工程系!北京100084;北京航空航天大学动力系!北京100074;北京航空航天大学动力系!北京100074
  • 发布日期:2021-08-15

Experimental research of casing treatment on single stage transonic fan

  1. Department of Hydraulic Engineering,Tshinghua Univ ,Beijing 100074,China;Department of Jet Propulsion,Beijing Univ.of Aerodynamics and Astronatics,Beijing 100083,China;Department of Jet Propulsion,Beijing Univ.of Aerodynamics and Astronatics,Beijing 100083,China
  • Published:2021-08-15

摘要: 为新研制的单级跨声速风扇设计了 3种不同形式的处理机匣 ,圆弧斜槽处理机匣、轴向斜槽处理机匣和反旋涡式处理机匣 ,并在该单级跨声风扇上进行了实验研究。采用新建立的试车台数据实时采集与监控系统 ,测量了该单级跨声速风扇的总性能和采用处理机匣后风扇的总性能、基元级性能。通过分析表明圆弧斜槽处理机匣使风扇的稳定工作裕度获得较大的改善 ,并且与实壁参考机匣相比 ,提高了峰值效率 ,其作用效果明显地优于其他形式的处理机匣

关键词: 涡轮风扇发动机;风扇;处理机匣;旋转失速;安全系数

Abstract: Three types of different casing treatment were designed for new developed single stage transonic fan. They are arc curved skewed slot casing treatment, axial skewed slot casing treatment and counter vortex slot casing treatment. By using real time data gathering and test system of the aero engine test bed, the detail measurement of single stage transonic fan performance with and without different casing treatments were made. Research results show that a further improvement is obtained with arc skewed slot than other casing treatments in stall margin and peak efficiency.

Key words: Turbofan engine;Fan;Casing treatment;Rotating stell;Safety factor