推进技术 ›› 2001, Vol. 22 ›› Issue (4): 307-310.

• • 上一篇    下一篇

进气畸变对压缩系统稳定性影响的数值模拟

乔渭阳,蔡元虎,陈玉春   

  1. 西北工业大学航空动力与热力工程系!陕西西安;710072;西北工业大学航空动力与热力工程系!陕西西安;710072;西北工业大学航空动力与热力工程系!陕西西安;710072
  • 发布日期:2021-08-15

Effect of pressure and temperature distortion orientation on turbine engine stability

  1. Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an, 710072,China;Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an, 710072,China;Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ., Xi’an, 710072,China
  • Published:2021-08-15

摘要: 采用基于平行压气机理论的准一维时间相关模型方程以及激盘 滞后 容积的压气机级模型 ,研究了进气畸变对航空燃气涡轮发动机压缩系统稳定工作边界的影响 ,在一定物理转速和流量条件下的压气机稳态工作点参数则采用级堆叠方法进行计算。对总压畸变、总温畸变等进气条件下压气机稳定工作边界的变化进行了计算分析 ,结果表明进气总压畸变和进气总温畸变对发动机稳定性有很大的影响 ,畸变进气使得压气机稳定工作边界在压气机的特性图中向右下方移动 ,降低了发动机的喘振裕度。

关键词: 轴流式压气机;燃气涡轮发动机;气动稳定性;数值模拟;畸变

Abstract: A numerical model was presented for the prediction of the effects of distortion on the stability limit of the compressor in turbine engine. A quasi one dimensional, time dependent compression system model based on the parallel compressor theory was used to model the dynamic flow in compressor and the actuator lag volume model was adopted to model the stage of compressor. A stage stacking technique was used to compute the steady flow parameters in axial flow compressor. The variation of aerodynamic stability limit of compressor due to the total pressure distortion, total temperature distortion are calculated and analyzed. The numerical results show that the stability limit of compressor is moved down very much due to the pressure and temperature distortion.

Key words: Axial flow compressor;Gas turbine engine;Aerodynamic stability;Numerical simulation;Distortion