固体火箭发动机无损检测图像质量研究

推进技术 ›› 2001, Vol. 22 ›› Issue (4): 345-348.

固体火箭发动机无损检测图像质量研究

刘海峰,杨兴根

海军航空工程学院机械工程系!山东烟台264001;海军航空工程学院机械工程系!山东烟台264001

发布日期:2021-08-15

Quality improvement of SRM’s tomographical image

Dept. of Mechanical Engineering,Naval Aeronautical Engineering Academy,Yantai 624001,China;Dept. of Mechanical Engineering,Naval Aeronautical Engineering Academy,Yantai 624001,China

Published:2021-08-15

摘要/Abstract

摘要： 详细介绍了在利用工业CT进行固体火箭发动机无损检测中 ,提高图像质量方面的几点尝试———光轴对准、提高系统的信噪比、提高探测器效率、采用合适的硬滤手段和选用适当的图像滤波函数。给出了测试数据和处理前后的图像比较。上述几点尝试收到了较好的处理效果。

关键词: 固体推进剂火箭发动机;X射线检验;计算机辅助断层成像;图像处理

Abstract: Mentiond importance of SRM nondestruction test and recounts varied measure to improve quality of ICT’s image,especially provide four ways-calibrate light axis, improve signal to noise ratio of system,improve efficiency of detector and suitable filter function.Some results were illustrated by comparing test data and original image from beginning to end.Better effect was got by these measures.

Key words: Solid propellant rocket engine;X ray inspection;Computer aided tomography;Image processing

刘海峰,杨兴根. 固体火箭发动机无损检测图像质量研究[J]. 推进技术, 2001, 22(4): 345-348.