通道式表面张力贮箱推进剂管理装置的设计

推进技术 ›› 2003, Vol. 24 ›› Issue (4): 303-305.

通道式表面张力贮箱推进剂管理装置的设计

李治,沈赤兵,周进

国防科技大学航天与材料工程学院湖南长沙410073;国防科技大学航天与材料工程学院湖南长沙410073;国防科技大学航天与材料工程学院湖南长沙410073

发布日期:2021-08-15

Design of channel surface tension tank propellant management device

Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering, National Univ. of Defence Technology, Changsha 410073, China

Published:2021-08-15

摘要/Abstract

摘要： 为了减少推进剂管理装置的质量和筛网使用面积,提出以最小剩余质量为目标,进行通道式表面张力管理装置的设计。用引进下降因子的Newton格式分析计算模型,通过压力网络计算,得到了结构尺寸和剩余质量的关系,并且讨论选择了最佳设计点。结果表明,以剩余质量为目标可得到理想的设计,确定的最佳设计点可以为表面张力贮箱设计提供参考。

关键词: 推进剂贮箱;表面张力贮箱;剩余质量;推进剂控制;推进剂管理

Abstract: To reduce the mass of the propellant management device and the screen area used, the design was aimed to use the minimum mass to meet the requirement. The relation between dimension and mass were presented by using pressure network analytics, and the optimization design was presented through analyzing. The result obtained can be useful for the design of the channel surface tension tank.

Key words: Propellant tank;Surface tension tank;Remainder mass;Propellant control;Propellant management

李治,沈赤兵,周进. 通道式表面张力贮箱推进剂管理装置的设计[J]. 推进技术, 2003, 24(4): 303-305.