燃烧条件下药柱脱粘扩展的设计

推进技术 ›› 2004, Vol. 25 ›› Issue (3): 274-277.

燃烧条件下药柱脱粘扩展的设计

阳建红,侯根良,刘朝丰,成曙,何国强,吕秋娟,岳应娟

西安交通大学材料科学与工程学院;陕西西安710049;第二炮兵工程学院机电工程系;陕西西安710025;第二炮兵工程学院机电工程系;陕西西安710025;第二炮兵工程学院机电工程系;陕西西安710025;西北工业大学航天工程学院;陕西西安710025;第二炮兵工程学院机电工程系;陕西西安710025;第二炮兵工程学院机电工程系;陕西西安710025

发布日期:2021-08-15
基金资助:
国家重点实验室基金资助项目(99JS60.2.2JB4702)。

Design the sample of the debond propagation in burning propellant

Dept.of Material Science and Engineering,Xi’an Jiaotong Univ.,Xi’an 710049,China;Dept.of Mechanics and Electrics,The Second Artillery Engineering Coll., Xi’an 710025,China;Dept.of Mechanics and Electrics,The Second Artillery Engineering Coll., Xi’an 710025,China;Dept.of Mechanics and Electrics,The Second Artillery Engineering Coll., Xi’an 710025,China;Coll. of Astronautics, Northwestern Polytechnical Univ.,Xi’an 710072,China;Dept.of Mechanics and Electrics,The Second Artillery Engineering Coll., Xi’an 710025,China;Dept.of Mechanics and Electrics,The Second Artillery Engineering Coll., Xi’an 710025,China

Published:2021-08-15

摘要/Abstract

摘要： 利用有限元方法分析了不同条件下药柱脱粘部位的应力状况,设计了复合固体推进剂燃烧条件下的脱粘扩展试件,通过X射线实时成像系统纪录了燃烧过程。结果表明:要形成脱粘扩展,脱粘部位装药要有大的拉伸变形;当药柱在点火冲击作用下,脱粘产生比较大的拉伸变形,且变形达到脱粘扩展的临界变形量时,就会出现脱粘扩展。

关键词: 固体推进剂火箭发动机;推进剂燃烧;脱粘+;有限元法

Abstract: In order to study the debond propagation in the burning propellant,finite element method was used to calculate the stress distribution of different specimens?The combustion process was measured by the X-ray real time radiography system. The conclution is that the large tension deformation must be obtained for the debond propagation. Since the deformation slot is pressed in the specimen ignition,the larger tension deformation will be obtained. As a result,when the tension deformation reaches the critical value,the debond will be propagated.

Key words: Solid propellant rocket engine;Propellant combustion;Debond~+;Finite element method

阳建红,侯根良,刘朝丰,成曙,何国强,吕秋娟,岳应娟. 燃烧条件下药柱脱粘扩展的设计[J]. 推进技术, 2004, 25(3): 274-277.