推力室喉部层板发汗冷却段的结构设计分析

推进技术 ›› 2004, Vol. 25 ›› Issue (4): 316-319.

推力室喉部层板发汗冷却段的结构设计分析

杨卫华,程惠尔,王平阳,吴利俊

上海交通大学机械与动力学院工程热物理所上海200030;上海交通大学机械与动力学院工程热物理所上海200030;上海交通大学机械与动力学院工程热物理所上海200030;上海交通大学机械与动力学院工程热物理所上海200030

发布日期:2021-08-15

Structural design analysis for platelet transpiration cooling section at throat of thrust chamber

Inst.of Thermophysics and Energy ,Shanghai Jiaotong Univ., Shanghai, 200030,China;Inst.of Thermophysics and Energy ,Shanghai Jiaotong Univ., Shanghai, 200030,China;Inst.of Thermophysics and Energy ,Shanghai Jiaotong Univ., Shanghai, 200030,China;Inst.of Thermophysics and Energy ,Shanghai Jiaotong Univ., Shanghai, 200030,China

Published:2021-08-15

摘要/Abstract

摘要： 根据层板单元的热分析结果和层板发汗冷却推力室固有的结构特点,提出这种先进发动机冷却方案的设计原理和结构参数的计算公式,结合一台50kN发动机推力室喉部改再生冷却为发汗冷却的改形设计,分析其层板发汗冷却段喉部的设计方法和主要结构尺寸的计算结果。还比较了全再生冷却和发汗冷却两种冷却方式下发动机推力室的温度、热流密度和重量。对先进层板发汗冷却推力室的结构设计提供了参考。

关键词: 发汗冷却;结构设计;推力燃烧室;液体推进剂火箭发动机

Abstract: According to the thermal analysis results of the platelet cell and the inherent characteristics of platelet transpiration cooling thrust chamber, the design principle and computational method of the advanced cooling project of rocket engine were brought forward. By the design to change the regeneration cooling into the transpiration cooling at the throat section of a 50kN liquid rocket engine thrust chamber, the design method of the platelet transpiration cooling section and the calculation results of main geometrical dimension were all analyzed. The temperature, thermal flux and weight between the complete regeneration cooling thrust chamber and transpiration cooling thrust chamber were all compared. The content can be helpful for the design of the advanced platelet transpiration cooling thrust chamber.

Key words: Sweat cooling;Structural design;Thrust chamber;Liquid propellant rocket engine

杨卫华,程惠尔,王平阳,吴利俊. 推力室喉部层板发汗冷却段的结构设计分析[J]. 推进技术, 2004, 25(4): 316-319.