激光水推进的机理研究及参数优化

推进技术 ›› 2007, Vol. 28 ›› Issue (5): 586-589.

激光水推进的机理研究及参数优化

王彬,唐志平,蔡建,胡晓军

中国科学技术大学力学和机械工程系安徽合肥230026;中国科学院材料力学行为和设计重点实验室;安徽合肥230027;中国科学技术大学力学和机械工程系安徽合肥230026;中国科学院材料力学行为和设计重点实验室;安徽合肥230028;中国科学技术大学力学和机械工程系安徽合肥230026;中国科学院材料力学行为和设计重点实验室;安徽合肥230029;中国科学技术大学力学和机械工程系安徽合肥230026;中国科学院材料力学行为和设计重点实验室;安徽合肥230030

发布日期:2021-08-15
基金资助:
国家“九七三”项目(61328)

Mechanism for water-powered laser propulsion

Dept.of Mechanics and Mechanical Engineering,China;Univ. of Science and Technology,Hefei 230026,China;Key Lab.for Mechanical Behavior and Design of Materials,Academia Sinica,Hefei 230027,China;Dept.of Mechanics and Mechanical Engineering,China;Univ. of Science and Technology,Hefei 230026,China;Key Lab.for Mechanical Behavior and Design of Materials,Academia Sinica,Hefei 230028,China;Dept.of Mechanics and Mechanical Engineering,China;Univ. of Science and Technology,Hefei 230026,China;Key Lab.for Mechanical Behavior and Design of Materials,Academia Sinica,Hefei 230029,China;Dept.of Mechanics and Mechanical Engineering,China;Univ. of Science and Technology,Hefei 230026,China;Key Lab.for Mechanical Behavior and Design of Materials,Academia Sinica,Hefei 230030,China

Published:2021-08-15

摘要/Abstract

摘要： 为了研究双层结构靶的激光水推进过程中各阶段能量转移和转化的物理机制,将一个激光脉冲推进过程划分为四个阶段,并针对双层结构靶的特点,提出了"爆炸-连续爆炸推进模型",利用该模型定性解释了实验结果。实验显示,激光水推进得到的冲量耦合系数比其它推进模式高一到两个数量级。定义了金属粒子与水分子单次碰撞的能量传递率κ为表征推进效率的一个参量,计算不同的金属基底材料对应的κ值:A l为96%,Fe为73.6%,Cu为68.8%,该结果与实验得到的Cm值变化趋势一致。通过对模型的分析,得出选择原子量与水分子量接近的金属,可以得到更好的推进效果;并存在一个与基底材料和激光参数对应的水层最优厚度。

关键词: 激光推进;激光水推进+;双层结构靶;基板;材料

Abstract: The propulsion in one laser pulse period was divided into four relative phases.The principles and laws of energy translation and transformation in each phase were investigated separately.A new model named "explosion and continuous explosion propulsion" was proposed to describe the character of water-powered propulsion for exotic target.It can determine the nature of the experimental results.Water-powered laser propulsion can generate much higher Cm than other modes of laser propulsion.A parameter κ is defined to describe the energy transformation rate of one impact between metal atom and water molecule.The κ of Cu,Fe and Al are 68.8%,73.6% and 96.0% respectively,has the same increasing trend as the trend of Cm using these material as target floor.By investigating the principles,using a metal which has the closest atomic weight with the water molecule as the floor material can lead to better propulsive effect.There is an optimization for thickness which depends on the target floor and the laser parameters.

Key words: Laser propulsion;Water-powered laser propulsion+;Exotic target;Target floor;Material

王彬,唐志平,蔡建,胡晓军. 激光水推进的机理研究及参数优化[J]. 推进技术, 2007, 28(5): 586-589.