推进技术 ›› 2007, Vol. 28 ›› Issue (6): 692-696.

• • 上一篇    下一篇

电子回旋共振推力器C/C复合材料栅极的力学性能

刘文一,杨涓,毛根旺,李克智   

  1. 西北工业大学航天学院 陕西西安710072;;西北工业大学材料学院 辽宁大连116023;西北工业大学航天学院 陕西西安710072;西北工业大学航天学院 陕西西安710072;91550部队
  • 发布日期:2021-08-15
  • 基金资助:
    国家自然科学基金(10575081)支持项目

Mechanical property evaluation of C/C composite material grids for electron cyclotron resonance thruster

  1. Coll.of Astronautics,Northwestern Polytechnic Univ.,Xi’an 710072,China;PLA 91550,Dalian 116023,China;Coll.of Astronautics,Northwestern Polytechnic Univ.,Xi’an 710072,China;Coll.of Astronautics,Northwestern Polytechnic Univ.,Xi’an 710072,China;Dept.of Materials Science and Engineering,Northwestern Polytechnic Univ.,Xi’an 710072,China
  • Published:2021-08-15

摘要: 为了研究电子回旋共振推力器在搭载火箭升空过程中,过载和振动环境对栅极带来的影响,采用有限元分析软件建立了10 cm C/C复合材料栅极的有限元分析模型,计算分析了不同C/C复合材料栅极的力学性能、频率响应和振动模态。结果表明:20g过载下,栅极的最大变形量为6.12×10-4mm;在5~800 Hz激振下,栅极频率响应的最大位移为2.3×10-6mm;过载对栅极的影响要大于振动对它的影响,但是这两个值都在安全门限内;综合分析栅极频响和模态分析的计算结果,栅极仅在其第一阶模态处于外界激振发生共振。

关键词: 电子回旋共振推力器;过载;振动;模态分析

Abstract: To predict influence of the rocket acceleration force and vibration on electron cyclotron resonance thruster when it is being launched to space,a finite element model of 10 cm C/C composite material grid was established with finite element analysis software.Some of its dynamic characteristics,vibration response characteristics and models was analyzed.The results show that when the acceleration was 20 g,C/C composite material grid displacement is less than 6.12×10-4 mm.Its response displacement is 2.3×10-6 mm when the frequency range of exciting force was 5 to 800 Hz.The acceleration force affected on C/C composite material grid was severer than vibration on that,but two of the valuations were within the safe threshold.The C/C composite material grid only vibrated sympathetically on its first mode.

Key words: Electron cyclotron resonance thruster;Acceleration force;Vibration;Mode analysis