涡轮基组合循环发动机性能数值模拟

推进技术 ›› 2009, Vol. 30 ›› Issue (1): 1-4.

• • 下一篇

涡轮基组合循环发动机性能数值模拟

刘增文,王占学,蔡元虎,马会民

西北工业大学动力与能源学院;西北工业大学动力与能源学院;西北工业大学动力与能源学院;北京动力机械研究所

发布日期:2021-08-15
基金资助:
国防基础科研基金(A0420060522)

Numerical simulation of performance for turbine based combined cycle propulsion system

School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710072,China;School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710073,China;School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710074,China;Beijing Power Machinery Research Inst.,Beijing 100074,China

Published:2021-08-15

摘要/Abstract

摘要： 分析了涡轮基组合循环发动机的布局方式,选择串联式涡扇-冲压组合发动机方案作为研究对象,给出了涡扇发动机和冲压发动机主要设计参数,阐述了涡轮冲压组合发动机模态转换点的选择方法,选择马赫数3作为工作模态转换点。基于模块化合成程序的研究思想,采用数值模拟方法研究了沿飞行轨迹的涡轮冲压组合发动机的气动热力学参数以及性能特性,研究表明,可在推力波动不大于10%的情况下完成工作模态转换。

关键词: 涡轮基组合循环发动机;性能;数值仿真

Abstract: The arrangement of turbine based combined cycle engines were investigated.Co-axial and tandem configuration was selected as a turbofan-ram combined engine.The design parameters of both turbofan engine and ramjet were laid out,and the rules were expounded to explain how to ascertain the transition point of operation mode.Based on a modular structure code,the performance characteristic of turbo-ramjet was simulated by numerical method.

Key words: Turbine based combined cycle propulsion system;Performance;Numerical simulation

刘增文,王占学,蔡元虎,马会民. 涡轮基组合循环发动机性能数值模拟[J]. 推进技术, 2009, 30(1): 1-4.

涡轮基组合循环发动机性能数值模拟

Numerical simulation of performance for turbine based combined cycle propulsion system

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价