失谐叶盘振动模态局部化定量描述方法

推进技术 ›› 2009, Vol. 30 ›› Issue (4): 457-461.

失谐叶盘振动模态局部化定量描述方法

王建军,于长波,姚建尧,李其汉

北京航空航天大学能源与动力工程学院;北京航空航天大学能源与动力工程学院;北京航空航天大学能源与动力工程学院;北京航空航天大学能源与动力工程学院

发布日期:2021-08-15
基金资助:
国家“八六三”计划(2008AA04Z403)

Vibratory mode localization factors of mistuned bladed disk assemblies

Coll.of Energy and Power Engineering,Beijing Univ.of Aeronautics and Astronautics,Beijing 100191,China;Coll.of Energy and Power Engineering,Beijing Univ.of Aeronautics and Astronautics,Beijing 100191,China;Coll.of Energy and Power Engineering,Beijing Univ.of Aeronautics and Astronautics,Beijing 100191,China;Coll.of Energy and Power Engineering,Beijing Univ.of Aeronautics and Astronautics,Beijing 100191,China

Published:2021-08-15

摘要/Abstract

摘要： 基于实际叶盘结构失谐振动模态局部化的基本特性和物理含义,提出了三种模态振型局部化程度三定量描述方法,并利用这三种模态局部化因子进行了典型叶盘结构失谐振动模态局部化程度的定量确定。讨论了典型叶盘结构失谐振动模态特性。分析说明和实例计算表明,相应的局部化因子计算过程简单、物理意义明确,可以有效定量确定实际叶盘结构的叶片失谐导致振动模态产生局部化的程度。

关键词: 失谐叶盘结构;振动模态局部化;三种模态局部化因子

Abstract: Based on the vibration mode characteristics of mistuning bladed disk,the definitions of three modal localization factor are presented to assess quantitatively the behavior of the shape localization for the mistuned bladed disk,including the mode displacement factor,mode stress factor and mode strain energy factor.By these three mode factors,an example of mistuning bladed disk is finished by ANSYS.Their main properties are explained.Results indicate that the mode localization factors presented are effective.

Key words: Mistuning bladed disk;Vibration modal characteristics;Localization factors

王建军,于长波,姚建尧,李其汉. 失谐叶盘振动模态局部化定量描述方法[J]. 推进技术, 2009, 30(4): 457-461.