过氧化氢/酒精燃气发生器系统稳定性仿真

推进技术 ›› 2010, Vol. 31 ›› Issue (1): 78-81.

过氧化氢/酒精燃气发生器系统稳定性仿真

谭建国,刘景华,王振国

国防科技大学航天与材料工程学院;国防科技大学航天与材料工程学院;国防科技大学航天与材料工程学院

发布日期:2021-08-15

Simulation on system stability of hydrogen peroxide/ethanol gas generator

Inst.of Aerospace and Material Engineering,National Univ.of Defence Technology,Changsha 410073,China;Inst.of Aerospace and Material Engineering,National Univ.of Defence Technology,Changsha 410073,China;Inst.of Aerospace and Material Engineering,National Univ.of Defence Technology,Changsha 410073,China

Published:2021-08-15

摘要/Abstract

摘要： 为解决某过氧化氢/酒精燃气发生器中出现的低频不稳定现象,开展了耦合二维燃烧室模型和一维供应系统模型的仿真研究,得到了燃气发生器内的低频振荡现象,振荡频率与试验值较一致,分析了各种因素对稳定度的影响。结果表明:混合维仿真方法有利于提高系统仿真的可靠度,过小的喷注压降、较低的燃烧温度,是造成系统不稳定的主要因素。

关键词: 燃气发生器;系统稳定性;仿真;过氧化氢

Abstract: In order to solve the problem of low-frequency instability occurred in hydrogen peroxide/ethanol gas generator,simulation is conducted which integrates 2-dimensional combustor model and 1-dimensional feed system models.The fluctuations are observed in accordance with experiment results through simulation and the effects of various factors on stability degree are analyzed.Results show that the method which mixes different dimensional models is helpful to improve the fidelity of system simulation.Both too low injecting pressure and relative low combustion temperature contribute to the system instability.

Key words: Gas generator;System stability;Simulation;Hydrogen peroxide

谭建国,刘景华,王振国. 过氧化氢/酒精燃气发生器系统稳定性仿真[J]. 推进技术, 2010, 31(1): 78-81.