离心式压气机耦合松弛多学科设计优化方法

推进技术 ›› 2011, Vol. 32 ›› Issue (1): 42-46.

离心式压气机耦合松弛多学科设计优化方法

李磊,李元生,于明,敖良波,岳珠峰

西北工业大学工程力学系,陕西西安 710072;西北工业大学工程力学系,陕西西安 710072;西北工业大学工程力学系,陕西西安 710072;西北工业大学工程力学系,陕西西安 710072;西北工业大学工程力学系,陕西西安 710072

发布日期:2021-08-15
作者简介:李磊(1983—),男,博士,研究领域为结构设计与优化。E-mail:lilei2005@yahoo.cn
基金资助:
国家“八六三”计划(2009AA04Z418)；博士后基金(20100471634)；高等学校学科创新引智计划项目(B07050)；西北工业大学种子基金。

Coupling-looseness multidisciplinary design optimization of centrifugal compressor

Dept. of Engineering Mechanics, Northwestern Polytechnical Univ., Xian 710072, China;Dept. of Engineering Mechanics, Northwestern Polytechnical Univ., Xian 710072, China;Dept. of Engineering Mechanics, Northwestern Polytechnical Univ., Xian 710072, China;Dept. of Engineering Mechanics, Northwestern Polytechnical Univ., Xian 710072, China;Dept. of Engineering Mechanics, Northwestern Polytechnical Univ., Xian 710072, China

Published:2021-08-15

摘要/Abstract

摘要： 为提高多学科设计优化的寻优效率,以离心式压气机为对象,开展了耦合松弛多学科设计优化方法的研究。针对松散耦合方法建立的离心式压气机的流-热-固耦合分析模型,为了避免反复迭代导致的分析、优化时间过长,构建了分层次的离心式压气机耦合松弛优化设计系统。在气动优化中采用全局寻优算法探索系统最优气动设计方案；在耦合优化阶段,综合考虑学科间耦合及相互作用,在气动优化的基础上局部寻优校验气动优化结果并得到最终设计方案。这种不同复杂层次模型的优化设计有效缩减了系统优化设计周期。

关键词: 离心式压气机;流-热-固耦合;耦合信息传递;变复杂度优化设计;耦合松弛优化设计 

Abstract: Coupling-Looseness Multidisciplinary Design Optimization of centrifugal compressor is presented in order to improve optimization efficiency. Fluent-Thermal-Solid coupling system is obtained with Loose-Coupling method. The Coupling-Looseness optimization method by multi-stage optimization strategy is studied to reduce computing time, which avoids iteration of Fluent-Thermal-Solid coupling system. In aerodynamic optimization stage, the optimization is obtained by global arithmetic in whole design space. Coupling and collision among subjects are considered in coupling design stage, which is driven by local arithmetic to gain the final design. The design cycle is reduced by multi-stage optimization with different complexity model.

Key words: Centrifugal compressor; Fluent-thermal-solid coupling; Coupling information transfer; Variable complexity optimization; Coupling-looseness technology

李磊,李元生,于明,敖良波,岳珠峰. 离心式压气机耦合松弛多学科设计优化方法[J]. 推进技术, 2011, 32(1): 42-46.

参考文献

[2] 颜力, 陈小前, 王振国.飞行器多学科设计优化中的灵敏度分析方法研究[J].航空计算技术,5,5(1):1-6.
[3] Giunta A A, Watson L T.A comparison of approximation modeling techniques:polynomial versus interpolating models [R].AIAA 98-4758.
[4] Simpson T W, Mauery T M, Korte J J, et al.Comparison of response surface and kriging models for multidisciplinary design optimization [R].AIAA 98-4755.
[5] 陈颖, 宁佐贵.基于神经网络响应面法的随机结构动力可靠度分析[J].振动与冲击,7,6(1):65-68.
[6] Silva V, Fleming P J, Sugimoto J, et al.Multiobjective optimization using variable complexity modeling for control system design[J].Applied Soft Computing, 8,8 (1):392-401.
[7] 刘慧超.基于近似模型的变复杂度优化方法研究[D].长沙:国防科技大学, 2006:1-17.
[8] Carstens V, Kemme R, Schmitt S.Coupled simulation of flow-structure interaction in turbomachinery [J].Aerospace Science and Technology, 3,7 (4):298-306.
[9] 李磊, 李元生, 敖良波,等.离心式压气机流-热-固耦合分析[J].推进技术, 9,0(4):425-429.(LI Lei, LI Yuan-sheng, AO Liang-bo, et al.Fluent-thermal-solid coupling analysis of centrifugal compressor [J].Journal of Propulsion Technology, 9,0(4):425-429).
[10] Sobieszcazanski-Sobieski J.A linear decomposition method for optimization problem-blueprint for development[R].NASA Technical Memorandum 8,2.
[11] Young Y.Time-dependent hydroelastic analysis of cavitation propulsors [J].Journal of Fluids and Structures, 7,3 (2):269-295.
[12] Sathe S, Benney R, Charles R, et al.Fluid-structure interaction modeling of complex parachute designs with the space-time finite element techniques [J].Computers & Fluids, 7,6 (1):127-135.
[13] 李立州, 王婧超, 吕震宙,等.基于网格重生成的涡轮叶片变形传递方法[J].航空动力学报, 8,3(3):547-551.