推进技术 ›› 2011, Vol. 32 ›› Issue (4): 564-568.

• 材料 推进剂 燃料 • 上一篇    下一篇

HTPB推进剂老化断裂性能试验

常新龙,余堰峰,张有宏,龙兵   

  1. 第二炮兵工程学院,陕西 西安 710025;第二炮兵工程学院,陕西 西安 710025;第二炮兵工程学院,陕西 西安 710025;西北工业大学 航空学院,陕西 西安 710072;第二炮兵工程学院,陕西 西安 710025
  • 发布日期:2021-08-15
  • 作者简介:常新龙(1965—),男,博士,教授,研究领域为导弹动力系统失效物理与可靠性。E-mail:xinlongch@sina.com
  • 基金资助:
    中国博士后科学基金资助。

Test on aging fracture properties of HTPB propellant

  1. The Second Artillery Engineering Coll.,Xian 710025,China;The Second Artillery Engineering Coll.,Xian 710025,China;The Second Artillery Engineering Coll.,Xian 710025,China;School of Aeronautics, Northwest Polytechnical Univ.,Xian 710072,China;The Second Artillery Engineering Coll.,Xian 710025,China
  • Published:2021-08-15

摘要: 为研究老化对HTPB推进剂断裂性能的影响,开展了HTPB推进剂高温加速老化试验,测定了不同老化时间、老化温度下推进剂含Ⅰ型裂纹的断裂韧性值,并利用扫描电镜观测了推进剂断面微观形貌。结果表明:随着老化时间和老化温度的不断增加,推进剂断裂韧性值不断下降;老化时间越长和老化温度越大,拉伸速率越小,推进剂拉伸断面“脱湿”越严重,裂纹尖端处的“脱湿”较内部断面更严重。

关键词: HTPB推进剂;高温老化;断裂韧性;脱湿

Abstract: In order to study the influence of aging on HTPB propellant fracture capability, the high temperature accelerated aging experiment of HTPB propellant was carried out. The value of propellant fracture toughness at different aging time and temperature with Ι mode crack was obtained and fracture surface microscopic pattern was observed by SEM. The results show that the value of fracture toughness continuously decreases with the lengthening of aging time and rise of temperature. The dewetting of cross section is more serious, when the aging time is longer and aging temperature is higher, and the dewetting of crack tip is more serious than the inner of cross section.

Key words: HTPB propellant; High temperature aging; Fracture toughness; Dewetting