轴流压气机转子叶片表面静压分布实验

推进技术 ›› 2011, Vol. 32 ›› Issue (5): 611-616.

轴流压气机转子叶片表面静压分布实验

王庆伟,刘波,薄相峰,项效镕,侯为民

西北工业大学动力与能源学院;西北工业大学动力与能源学院;西北工业大学动力与能源学院;西北工业大学动力与能源学院;西北工业大学动力与能源学院

发布日期:2021-08-15
基金资助:
国家自然科学基金(50476071)

Experiment of the static pressure on the rotating blade surface in an axial compressor

School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710072,China;School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710072,China;School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710072,China;School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710072,China;School of Power and Energy,Northwestern Polytechnical Univ.,Xi’an 710072,China

Published:2021-08-15

摘要/Abstract

摘要： 在低速轴流压气机转子叶片吸力面50%叶高沿轴向埋入5个Kulite动态压力传感器,并采用固定在压气机转轴上一种新型可存储的数据采集器记录数据,对近设计点和2 kr/min转速不同流量工况条件下转子叶片表面静压进行了实验测量,并与CFD数值模拟结果进行了对比。结果表明,除近失速点外,叶片表面静压实验测量值与计算结果吻合较好,说明所采用的的测量方法是成功的,测量结果是可靠的;在近失速工况,实验值与计算结果差值较大,主要是由试验台振动所引起的实验误差和CFD数值计算对近失速点工况流场模拟得不够准确所导致的。

关键词: 轴流压气机;压气机叶片;压力分布;压力测量;压力系数

Abstract: Five high response miniature pressure transducers were used on the rotating blade suction surface of an axial compressor at 50% span to measure the static pressure of rotating blade suction surface at design point and different operating conditions at 2kr/min,and the experimental data were compared with the CFD numerically simulated results.In experiment,the data acquisition system was fixed and rotated with the compressor,and directly acquired,magnified,stored the pressure signals.The results show: the blade surface pressure of experimental data has good agreement with simulation results except near stall condition.The experimental data are credible;near stall condition,because of the experiment error and the poor calculations of CFD,the experimental data and simulation results have poor agreement.

Key words: Axial flow air compressor;Compressor blade;Pressure distribution;Pressure measurement;Pressure coefficient

王庆伟,刘波,薄相峰,项效镕,侯为民. 轴流压气机转子叶片表面静压分布实验[J]. 推进技术, 2011, 32(5): 611-616.